takže jsem zadal v konzole: try dmesg a toto mi to vypsalo.
Kód: Vybrat vše
[ 0.132763] pnp 00:07: >[io 0x0065-0x006f]
[ 0.132766] pnp 00:07: >[io 0x0072-0x007f]
[ 0.132769] pnp 00:07: >[io 0x0080]
[ 0.132771] pnp 00:07: >[io 0x0084-0x0086]
[ 0.132774] pnp 00:07: >[io 0x0088]
[ 0.132777] pnp 00:07: >[io 0x008c-0x008e]
[ 0.132779] pnp 00:07: >[io 0x0090-0x009f]
[ 0.132786] pnp 00:07: >[io 0x00a2-0x00bf]
[ 0.132789] pnp 00:07: >[io 0x00e0-0x00ef]
[ 0.132791] pnp 00:07: >[io 0x04d0-0x04d1]
[ 0.132794] pnp 00:07: >[io 0x0800-0x080f]
[ 0.132797] pnp 00:07: >[io 0x0500-0x057f]
[ 0.132799] pnp 00:07: >[io 0x0580-0x05ff]
[ 0.132802] pnp 00:07: >[io 0x0800-0x087f]
[ 0.132805] pnp 00:07: >[io 0x0880-0x08ff]
[ 0.132808] pnp 00:07: >[io 0x0d00-0x0d7f]
[ 0.132810] pnp 00:07: >[io 0x0d80-0x0dff]
[ 0.132813] pnp 00:07: >[io 0x0900-0x097f]
[ 0.132816] pnp 00:07: >[io 0x0980-0x09ff]
[ 0.132819] pnp 00:07: >[io 0x2000-0x207f]
[ 0.132821] pnp 00:07: >[io 0x2080-0x20ff]
[ 0.132824] pnp 00:07: >[mem 0xfefe0000-0xfefe01ff]
[ 0.132827] pnp 00:07: >[mem 0xfefe1000-0xfefe1fff]
[ 0.132830] pnp 00:07: >[mem 0xfee01000-0xfeefffff]
[ 0.132833] pnp 00:07: >[mem 0xffb80000-0xffffffff]
[ 0.132836] pnp 00:07: >[mem 0xff300000-0xff3fffff]
[ 0.132847] pnp 00:07: >disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.132851] pnp 00:07: >disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.132965] system 00:07: >[io 0x04d0-0x04d1] has been reserved
[ 0.132969] system 00:07: >[io 0x0800-0x080f] has been reserved
[ 0.132973] system 00:07: >[io 0x0500-0x057f] has been reserved
[ 0.132976] system 00:07: >[io 0x0580-0x05ff] has been reserved
[ 0.132984] system 00:07: >[io 0x0800-0x087f] could not be reserved
[ 0.132988] system 00:07: >[io 0x0880-0x08ff] has been reserved
[ 0.132991] system 00:07: >[io 0x0d00-0x0d7f] has been reserved
[ 0.132995] system 00:07: >[io 0x0d80-0x0dff] has been reserved
[ 0.132999] system 00:07: >[io 0x2000-0x207f] has been reserved
[ 0.133002] system 00:07: >[io 0x2080-0x20ff] has been reserved
[ 0.133007] system 00:07: >[mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.133010] system 00:07: >[mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.133014] system 00:07: >[mem 0x000de000-0x000dffff window] has been reserved
[ 0.133018] system 00:07: >[mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.133022] system 00:07: >[mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.133025] system 00:07: >[mem 0xfee01000-0xfeefffff] has been reserved
[ 0.133029] system 00:07: >[mem 0xffb80000-0xffffffff] has been reserved
[ 0.133033] system 00:07: >[mem 0xff300000-0xff3fffff] has been reserved
[ 0.133037] system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133113] pnp 00:08: >[mem 0xfed00000-0xfed00fff]
[ 0.133145] pnp 00:08: >Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.133217] pnp 00:09: >[mem 0xfec00000-0xfec00fff]
[ 0.133220] pnp 00:09: >[mem 0xfee00000-0xfee00fff]
[ 0.133223] pnp 00:09: >[mem 0xa0000000-0x9fffffff disabled]
[ 0.133267] system 00:09: >[mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.133271] system 00:09: >[mem 0xfee00000-0xfee00fff] has been reserved
[ 0.133275] system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133306] pnp 00:0a: >[io 0x0060]
[ 0.133309] pnp 00:0a: >[io 0x0064]
[ 0.133318] pnp 00:0a: >[irq 1]
[ 0.133356] pnp 00:0a: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.133393] pnp 00:0b: >[irq 12]
[ 0.133681] pnp 00:0b: >Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.133851] pnp 00:0c: >[io 0x0000-0xffffffffffffffff disabled]
[ 0.133854] pnp 00:0c: >[io 0x0230-0x023f]
[ 0.133856] pnp 00:0c: >[io 0x0290-0x029f]
[ 0.133859] pnp 00:0c: >[io 0x0a00-0x0a0f]
[ 0.133862] pnp 00:0c: >[io 0x0a10-0x0a1f]
[ 0.133909] system 00:0c: >[io 0x0230-0x023f] has been reserved
[ 0.133912] system 00:0c: >[io 0x0290-0x029f] has been reserved
[ 0.133916] system 00:0c: >[io 0x0a00-0x0a0f] has been reserved
[ 0.133919] system 00:0c: >[io 0x0a10-0x0a1f] has been reserved
[ 0.133923] system 00:0c: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134584] pnp 00:0d: >[io 0x03f8-0x03ff]
[ 0.134593] pnp 00:0d: >[irq 4]
[ 0.134596] pnp 00:0d: >[dma 0 disabled]
[ 0.134675] pnp 00:0d: >Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.134725] pnp 00:0e: >[mem 0xe0000000-0xefffffff]
[ 0.134773] system 00:0e: >[mem 0xe0000000-0xefffffff] has been reserved
[ 0.134777] system 00:0e: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134937] pnp 00:0f: >[mem 0x00000000-0x0009ffff]
[ 0.134940] pnp 00:0f: >[mem 0x000c0000-0x000cffff]
[ 0.134943] pnp 00:0f: >[mem 0x000e0000-0x000fffff]
[ 0.134946] pnp 00:0f: >[mem 0x00100000-0x9fffffff]
[ 0.134948] pnp 00:0f: >[mem 0xff780000-0xffffffff]
[ 0.135002] system 00:0f: >[mem 0x00000000-0x0009ffff] could not be reserved
[ 0.135006] system 00:0f: >[mem 0x000c0000-0x000cffff] could not be reserved
[ 0.135009] system 00:0f: >[mem 0x000e0000-0x000fffff] could not be reserved
[ 0.135013] system 00:0f: >[mem 0x00100000-0x9fffffff] could not be reserved
[ 0.135017] system 00:0f: >[mem 0xff780000-0xffffffff] could not be reserved
[ 0.135021] system 00:0f: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.135375] pnp: PnP ACPI: found 16 devices
[ 0.135377] ACPI: ACPI bus type pnp unregistered
[ 0.135380] PnPBIOS: Disabled by ACPI PNP
[ 0.171858] pci 0000:00:04.0: >PCI bridge to [bus 01-01]
[ 0.171863] pci 0000:00:04.0: > bridge window [io 0xd000-0xdfff]
[ 0.171868] pci 0000:00:04.0: > bridge window [mem 0xdbf00000-0xdbffffff]
[ 0.171874] pci 0000:00:09.0: >PCI bridge to [bus 02-02]
[ 0.171877] pci 0000:00:09.0: > bridge window [io 0xe000-0xefff]
[ 0.171881] pci 0000:00:09.0: > bridge window [mem 0xdc000000-0xdfffffff]
[ 0.171885] pci 0000:00:09.0: > bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.171890] pci 0000:00:0b.0: >PCI bridge to [bus 03-03]
[ 0.171895] pci 0000:00:0c.0: >PCI bridge to [bus 04-04]
[ 0.171908] pci 0000:00:04.0: >setting latency timer to 64
[ 0.171918] pci_bus 0000:00: >resource 4 [io 0x0000-0xffff]
[ 0.171921] pci_bus 0000:00: >resource 5 [mem 0xa0000000-0xfcffffffff]
[ 0.171925] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.171928] pci_bus 0000:01: >resource 0 [io 0xd000-0xdfff]
[ 0.171931] pci_bus 0000:01: >resource 1 [mem 0xdbf00000-0xdbffffff]
[ 0.171934] pci_bus 0000:01: >resource 4 [io 0x0000-0xffff]
[ 0.171937] pci_bus 0000:01: >resource 5 [mem 0xa0000000-0xfcffffffff]
[ 0.171940] pci_bus 0000:01: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.171944] pci_bus 0000:02: >resource 0 [io 0xe000-0xefff]
[ 0.171947] pci_bus 0000:02: >resource 1 [mem 0xdc000000-0xdfffffff]
[ 0.171950] pci_bus 0000:02: >resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.172010] NET: Registered protocol family 2
[ 0.172083] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.172306] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.173194] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.173639] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.173642] TCP: reno registered
[ 0.173646] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.173660] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.173751] NET: Registered protocol family 1
[ 0.174017] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.752170] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.752237] pci 0000:00:00.0: >Found enabled HT MSI Mapping
[ 0.752287] pci 0000:00:00.0: >Found enabled HT MSI Mapping
[ 0.752347] pci 0000:00:00.0: >Found enabled HT MSI Mapping
[ 0.752405] pci 0000:00:00.0: >Found enabled HT MSI Mapping
[ 0.752463] pci 0000:00:00.0: >Found enabled HT MSI Mapping
[ 0.752526] pci 0000:00:00.0: >Found enabled HT MSI Mapping
[ 0.752593] pci 0000:00:00.0: >Found enabled HT MSI Mapping
[ 0.752664] pci 0000:00:00.0: >Found enabled HT MSI Mapping
[ 0.752690] pci 0000:02:00.0: >Boot video device
[ 0.752693] PCI: CLS 64 bytes, default 64
[ 0.753192] audit: initializing netlink socket (disabled)
[ 0.753207] type=2000 audit(1373823884.748:1): initialized
[ 0.781958] Trying to unpack rootfs image as initramfs...
[ 0.816465] highmem bounce pool size: 64 pages
[ 0.816479] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.822480] VFS: Disk quotas dquot_6.5.2
[ 0.822544] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.828391] fuse init (API version 7.19)
[ 0.828502] msgmni has been set to 1681
[ 0.840491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.840524] io scheduler noop registered
[ 0.840527] io scheduler deadline registered (default)
[ 0.840536] io scheduler cfq registered
[ 0.840704] pcieport 0000:00:09.0: >irq 40 for MSI/MSI-X
[ 0.840775] pcieport 0000:00:0b.0: >irq 41 for MSI/MSI-X
[ 0.840830] pcieport 0000:00:0c.0: >irq 42 for MSI/MSI-X
[ 0.840898] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.840926] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.841083] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.841090] ACPI: Power Button [PWRB]
[ 0.841143] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.841146] ACPI: Power Button [PWRF]
[ 0.846888] GHES: HEST is not enabled!
[ 0.852324] isapnp: Scanning for PnP cards...
[ 0.857939] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.878284] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.964691] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.028616] Linux agpgart interface v0.103
[ 1.030399] brd: module loaded
[ 1.036782] loop: module loaded
[ 1.037066] pata_acpi 0000:00:06.0: >setting latency timer to 64
[ 1.037276] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.037312] pata_acpi 0000:00:08.0: >setting latency timer to 64
[ 1.037458] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 1.037487] pata_acpi 0000:00:08.1: >setting latency timer to 64
[ 1.037908] Fixed MDIO Bus: probed
[ 1.037979] tun: Universal TUN/TAP device driver, 1.6
[ 1.037981] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.038032] PPP generic driver version 2.4.2
[ 1.038088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.038129] ehci_hcd 0000:00:02.1: >setting latency timer to 64
[ 1.038133] ehci_hcd 0000:00:02.1: >EHCI Host Controller
[ 1.038140] ehci_hcd 0000:00:02.1: >new USB bus registered, assigned bus number 1
[ 1.038168] ehci_hcd 0000:00:02.1: >debug port 1
[ 1.038175] ehci_hcd 0000:00:02.1: >cache line size of 64 is not supported
[ 1.038207] ehci_hcd 0000:00:02.1: >irq 22, io mem 0xdbefec00
[ 1.048040] ehci_hcd 0000:00:02.1: >USB 2.0 started, EHCI 1.00
[ 1.048092] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[ 1.048096] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.048099] usb usb1: >Product: EHCI Host Controller
[ 1.048102] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 1.048104] usb usb1: >SerialNumber: 0000:00:02.1
[ 1.048240] hub 1-0:1.0: >USB hub found
[ 1.048246] hub 1-0:1.0: >10 ports detected
[ 1.048345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.048397] ohci_hcd 0000:00:02.0: >setting latency timer to 64
[ 1.048401] ohci_hcd 0000:00:02.0: >OHCI Host Controller
[ 1.048407] ohci_hcd 0000:00:02.0: >new USB bus registered, assigned bus number 2
[ 1.048443] ohci_hcd 0000:00:02.0: >irq 23, io mem 0xdbeff000
[ 1.132306] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[ 1.132311] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.132315] usb usb2: >Product: OHCI Host Controller
[ 1.132317] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[ 1.132320] usb usb2: >SerialNumber: 0000:00:02.0
[ 1.132471] hub 2-0:1.0: >USB hub found
[ 1.132479] hub 2-0:1.0: >10 ports detected
[ 1.132574] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.132655] usbcore: registered new interface driver libusual
[ 1.132723] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.133154] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.133162] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.133280] mousedev: PS/2 mouse device common for all mice
[ 1.133416] rtc_cmos 00:02: >RTC can wake from S4
[ 1.133569] rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
[ 1.133609] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.133673] device-mapper: uevent: version 1.0.3
[ 1.133744] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.133776] EISA: Probing bus 0 at eisa.0
[ 1.133781] EISA: Cannot allocate resource for mainboard
[ 1.133784] Cannot allocate resource for EISA slot 1
[ 1.133786] Cannot allocate resource for EISA slot 2
[ 1.133788] Cannot allocate resource for EISA slot 3
[ 1.133790] Cannot allocate resource for EISA slot 4
[ 1.133792] Cannot allocate resource for EISA slot 5
[ 1.133795] Cannot allocate resource for EISA slot 6
[ 1.133797] Cannot allocate resource for EISA slot 7
[ 1.133799] Cannot allocate resource for EISA slot 8
[ 1.133801] EISA: Detected 0 cards.
[ 1.133811] cpuidle: using governor ladder
[ 1.133813] cpuidle: using governor menu
[ 1.133815] EFI Variables Facility v0.08 2004-May-17
[ 1.136141] ashmem: initialized
[ 1.136292] TCP: cubic registered
[ 1.136419] NET: Registered protocol family 10
[ 1.136631] NET: Registered protocol family 17
[ 1.136647] Key type dns_resolver registered
[ 1.136708] Using IPI No-Shortcut mode
[ 1.136800] PM: Hibernation image not present or could not be loaded.
[ 1.136814] registered taskstats version 1
[ 1.443674] isapnp: No Plug & Play device found
[ 1.599570] Freeing initrd memory: 14720k freed
[ 1.610647] usb 1-8: >new high-speed USB device number 4 using ehci_hcd
[ 1.613594] Key type trusted registered
[ 1.616281] Key type encrypted registered
[ 1.619164] Magic number: 5:545:744
[ 1.619286] rtc_cmos 00:02: >setting system clock to 2013-07-14 17:44:46 UTC (1373823886)
[ 1.619334] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ (1 cpu cores) (version 2.20.00)
[ 1.619371] powernow-k8: fid 0xa (1800 MHz), vid 0x6
[ 1.619374] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.619417] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.619418] EDD information not available.
[ 1.619583] Freeing unused kernel memory: 756k freed
[ 1.620225] Write protecting the kernel text: 5960k
[ 1.620243] Write protecting the kernel read-only data: 2424k
[ 1.620245] NX-protecting the kernel data: 4280k
[ 1.644209] udevd[86]: starting version 175
[ 1.741863] usb 1-8: >New USB device found, idVendor=058f, idProduct=6362
[ 1.741869] usb 1-8: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.741873] usb 1-8: >Product: Mass Storage Device
[ 1.741876] usb 1-8: >Manufacturer: Generic
[ 1.741878] usb 1-8: >SerialNumber: 058F312D81B1
[ 1.751009] Initializing USB Mass Storage driver...
[ 1.755018] scsi0 : usb-storage 1-8:1.0
[ 1.755142] usbcore: registered new interface driver usb-storage
[ 1.755144] USB Mass Storage support registered.
[ 1.813292] pata_amd 0000:00:06.0: >version 0.4.1
[ 1.813349] pata_amd 0000:00:06.0: >setting latency timer to 64
[ 1.815986] FDC 0 is a post-1991 82077
[ 1.846724] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.846753] 8139cp 0000:01:0a.0: >This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.847223] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.847448] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 1.847999] 8139too 0000:01:0a.0: >eth0: RealTek RTL8139 at 0x0001d400, 00:e0:52:84:e5:63, IRQ 19
[ 1.855321] scsi1 : pata_amd
[ 1.858269] scsi2 : pata_amd
[ 1.859081] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.859084] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.859657] sata_nv 0000:00:08.0: >version 3.5
[ 1.859729] sata_nv 0000:00:08.0: >setting latency timer to 64
[ 1.862571] scsi3 : sata_nv
[ 1.865737] scsi4 : sata_nv
[ 1.865910] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 21
[ 1.865913] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 21
[ 1.866063] sata_nv 0000:00:08.1: >setting latency timer to 64
[ 1.868887] scsi5 : sata_nv
[ 1.870777] scsi6 : sata_nv
[ 1.870953] ata5: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb000 irq 20
[ 1.870956] ata6: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xb008 irq 20
[ 1.871059] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.871243] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.871252] forcedeth 0000:00:07.0: >setting latency timer to 64
[ 2.020288] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
[ 2.020299] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[ 2.036209] ata1.00: configured for UDMA/33
[ 2.041952] scsi 1:0:0:0: >CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
[ 2.048082] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.048085] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.048207] sr 1:0:0:0: >Attached scsi CD-ROM sr0
[ 2.048281] sr 1:0:0:0: >Attached scsi generic sg0 type 5
[ 2.048376] ata2: port disabled--ignoring
[ 2.186260] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.196542] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.308016] usb 2-1: >new low-speed USB device number 2 using ohci_hcd
[ 2.392445] forcedeth 0000:00:07.0: >ifname eth1, PHY OUI 0x1374 @ 1, addr 00:18:f3:4d:5a:b2
[ 2.392450] forcedeth 0000:00:07.0: >highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 2.535829] usb 2-1: >New USB device found, idVendor=04d9, idProduct=1603
[ 2.535833] usb 2-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.535836] usb 2-1: >Product: USB Keyboard
[ 2.535839] usb 2-1: >Manufacturer:
[ 2.652050] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.675115] usbcore: registered new interface driver usbhid
[ 2.675118] usbhid: USB HID core driver
[ 2.676214] ata4.00: ATA-8: SAMSUNG HD403LJ, CT100-12, max UDMA7
[ 2.676217] ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.684203] ata4.00: configured for UDMA/133
[ 2.684336] scsi 4:0:0:0: >Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5
[ 2.684532] sd 4:0:0:0: >[sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.684583] sd 4:0:0:0: >[sda] Write Protect is off
[ 2.684587] sd 4:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 2.684609] sd 4:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.684896] sd 4:0:0:0: >Attached scsi generic sg1 type 0
[ 2.727069] sda: sda1 sda2 < sda5 sda6 >
[ 2.727439] sd 4:0:0:0: >[sda] Attached SCSI disk
[ 2.752745] scsi 0:0:0:0: >Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.753369] scsi 0:0:0:1: >Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.753992] scsi 0:0:0:2: >Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.754617] scsi 0:0:0:3: >Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.758082] sd 0:0:0:0: >Attached scsi generic sg2 type 0
[ 2.758868] sd 0:0:0:0: >[sdb] Attached SCSI removable disk
[ 2.759246] sd 0:0:0:1: >Attached scsi generic sg3 type 0
[ 2.759672] sd 0:0:0:2: >Attached scsi generic sg4 type 0
[ 2.759993] sd 0:0:0:3: >Attached scsi generic sg5 type 0
[ 2.764749] sd 0:0:0:1: >[sdc] Attached SCSI removable disk
[ 2.765494] sd 0:0:0:2: >[sdd] Attached SCSI removable disk
[ 2.766116] sd 0:0:0:3: >[sde] Attached SCSI removable disk
[ 2.840029] usb 2-2: >new full-speed USB device number 3 using ohci_hcd
[ 3.052830] usb 2-2: >New USB device found, idVendor=067b, idProduct=2305
[ 3.052834] usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.052837] usb 2-2: >Product: IEEE-1284 Controller
[ 3.052840] usb 2-2: >Manufacturer: Prolific Technology Inc.
[ 3.152046] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.213469] ata6.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
[ 3.213473] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.220239] ata6.00: configured for UDMA/133
[ 3.220368] scsi 6:0:0:0: >Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
[ 3.220575] sd 6:0:0:0: >[sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.220578] sd 6:0:0:0: >[sdf] 4096-byte physical blocks
[ 3.220629] sd 6:0:0:0: >[sdf] Write Protect is off
[ 3.220633] sd 6:0:0:0: >[sdf] Mode Sense: 00 3a 00 00
[ 3.220656] sd 6:0:0:0: >[sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.220947] sd 6:0:0:0: >Attached scsi generic sg6 type 0
[ 3.266422] sdf: sdf1 sdf2 < sdf5 >
[ 3.266779] sd 6:0:0:0: >[sdf] Attached SCSI disk
[ 3.268615] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 3.288822] input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
[ 3.289060] hid-generic 0003:04D9:1603.0001: >input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:02.0-1/input0
[ 3.294939] input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input3
[ 3.295745] hid-generic 0003:04D9:1603.0002: >input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:02.0-1/input1
[ 3.324082] firewire_ohci 0000:01:08.0: >added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 3.786199] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 3.786206] EXT4-fs (sda5): write access will be enabled during recovery
[ 3.824136] firewire_core 0000:01:08.0: created device fw0: GUID 00601d000000ffde, S400
[ 6.305773] EXT4-fs (sda5): recovery complete
[ 6.332039] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 19.413480] Adding 975868k swap on /dev/sda6. Priority:-1 extents:1 across:975868k
[ 19.430045] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.430054] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.478043] udevd[352]: starting version 175
[ 19.541296] lp: driver loaded but no devices found
[ 19.613737] i2c i2c-0: >nForce2 SMBus adapter at 0x600
[ 19.613841] i2c i2c-1: >nForce2 SMBus adapter at 0x700
[ 19.643554] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 19.945771] ppdev: user-space parallel port driver
[ 20.032174] Bluetooth: Core ver 2.16
[ 20.032204] NET: Registered protocol family 31
[ 20.032206] Bluetooth: HCI device and connection manager initialized
[ 20.032209] Bluetooth: HCI socket layer initialized
[ 20.032210] Bluetooth: L2CAP socket layer initialized
[ 20.032215] Bluetooth: SCO socket layer initialized
[ 20.039415] parport_pc 00:06: >reported by Plug and Play ACPI
[ 20.039463] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 20.053549] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.053554] Bluetooth: BNEP filters: protocol multicast
[ 20.173409] lp0: using parport0 (interrupt-driven).
[ 20.428303] usblp 2-2:1.0: >usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[ 20.428366] usbcore: registered new interface driver usblp
[ 20.429354] k8temp 0000:00:18.3: >Temperature readouts might be wrong - check erratum #141
[ 20.491381] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 20.491389] hda_intel: Disabling MSI
[ 20.491421] snd_hda_intel 0000:00:05.0: >setting latency timer to 64
[ 20.713002] nvidia: module license 'NVIDIA' taints kernel.
[ 20.713009] Disabling lock debugging due to kernel taint
[ 20.761222] microcode: AMD CPU family 0xf not supported
[ 20.843944] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
[ 20.980674] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 16
[ 20.980714] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 20.991347] kvm: Nested Virtualization enabled
[ 20.993764] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.48 Sun Sep 9 20:22:29 PDT 2012
[ 21.255366] init: failsafe main process (674) killed by TERM signal
[ 21.383032] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 21.411852] hda_codec: AD1988: BIOS auto-probing.
[ 21.533660] 8139too 0000:01:0a.0: >eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 21.577373] forcedeth 0000:00:07.0: >irq 43 for MSI/MSI-X
[ 21.577412] forcedeth 0000:00:07.0: >eth1: MSI enabled
[ 21.577629] forcedeth 0000:00:07.0: >eth1: no link during initialization
[ 21.580675] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.581400] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 22.457637] init: udev-fallback-graphics main process (832) terminated with status 1
[ 25.644730] NVRM: GPU at 0000:02:00: GPU-0c091a89-ef0f-b84b-1199-9a1d08c5155b
[ 1041.384037] usb 1-7: >new high-speed USB device number 5 using ehci_hcd
[ 1041.536381] usb 1-7: >New USB device found, idVendor=18a5, idProduct=0214
[ 1041.536391] usb 1-7: >New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1041.536397] usb 1-7: >Product: Portable USB Drive
[ 1041.536402] usb 1-7: >Manufacturer: Verbatim
[ 1041.536407] usb 1-7: >SerialNumber: 1019215A1bed6
[ 1041.548508] scsi7 : usb-storage 1-7:1.0
[ 1042.552168] scsi 7:0:0:0: >Direct-Access TOSHIBA MK3252GSX PQ: 0 ANSI: 2
[ 1042.560968] sd 7:0:0:0: >Attached scsi generic sg7 type 0
[ 1042.561640] sd 7:0:0:0: >[sdg] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1042.563903] sd 7:0:0:0: >[sdg] Write Protect is off
[ 1042.563916] sd 7:0:0:0: >[sdg] Mode Sense: 38 00 00 00
[ 1042.566654] sd 7:0:0:0: >[sdg] No Caching mode page present
[ 1042.566666] sd 7:0:0:0: >[sdg] Assuming drive cache: write through
[ 1042.572282] sd 7:0:0:0: >[sdg] No Caching mode page present
[ 1042.572293] sd 7:0:0:0: >[sdg] Assuming drive cache: write through
[ 1042.581272] sdg: sdg1
[ 1042.587526] sd 7:0:0:0: >[sdg] No Caching mode page present
[ 1042.587538] sd 7:0:0:0: >[sdg] Assuming drive cache: write through
[ 1042.587544] sd 7:0:0:0: >[sdg] Attached SCSI disk
[ 1816.886391] usb 1-7: >USB disconnect, device number 5
[ 2553.881756] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2553.881765] ata6.00: BMDMA stat 0x25
[ 2553.881772] ata6.00: failed command: READ DMA EXT
[ 2553.881786] ata6.00: cmd 25/00:f0:50:34:86/00:00:37:00:00/e0 tag 0 dma 122880 in
[ 2553.881786] res 51/40:9f:a0:34:86/40:00:37:00:00/e0 Emask 0x9 (media error)
[ 2553.881792] ata6.00: status: { DRDY ERR }
[ 2553.881796] ata6.00: error: { UNC }
[ 2553.896584] ata6.00: configured for UDMA/133
[ 2553.896627] sd 6:0:0:0: >[sdf] Unhandled sense code
[ 2553.896633] sd 6:0:0:0: >[sdf]
[ 2553.896637] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2553.896642] sd 6:0:0:0: >[sdf]
[ 2553.896645] Sense Key : Medium Error [current] [descriptor]
[ 2553.896651] Descriptor sense data with sense descriptors (in hex):
[ 2553.896654] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2553.896671] 37 86 34 a0
[ 2553.896679] sd 6:0:0:0: >[sdf]
[ 2553.896685] Add. Sense: Unrecovered read error - auto reallocate failed
[ 2553.896690] sd 6:0:0:0: >[sdf] CDB:
[ 2553.896693] Read(10): 28 00 37 86 34 50 00 00 f0 00
[ 2553.896708] end_request: I/O error, dev sdf, sector 931542176
[ 2553.896739] ata6: EH complete
[ 2553.896766] JBD2: Failed to read block at offset 17828
[ 2553.896940] JBD2: recovery failed
[ 2553.896946] EXT4-fs (sdf1): error loading journal
maky@maky-System-Product-Name ~ $