Dell G3 17" I7-8750H instalace

Dotazy k instalaci a případné problémy se spouštěním systému Linux Mint
Odpovědět
Zpráva
Autor
koroncz
Příspěvky: 2
Registrován: 03 dub 2019, 13:31

Dell G3 17" I7-8750H instalace

#1 Příspěvek od koroncz » 03 dub 2019, 14:40

Dobrý den,
pořídil jsem si notebook Dell G3 17" s procesorem I7-8750H a grafickou kartou NVIDIA GeForce GTX 1050 Ti. Chi na notebook nainstalovat Linux Mint Cinnamon 18.3 64bit. Podařilo se mi nainstalovat systém(při bootu CD se musí nastavit parametr nomodeset), ale při najetí systému systém nahlásí
Prostředí Cinnamon právě zhavarovalo. Nyní je spouštěn náhradní nouzový režim.
Pokud zvolím restart prostředí, tak se celá situace zopakuje, pokud ne, tak zůstanu v nouzovém režimu. Celý desktop se pak chová, že pokud minimalizuji nějaké okno, tak se neobjeví ve spodní liště a dostanu se k němu jen klávesouvou zkratkou Alt-TAB,ale chyb bude asi více.
Grafiku NVIDIA jsem nainstaloval příkazem

Kód: Vybrat vše

sudo ubuntu-drivers autoinstall
Výpisy:

Kód: Vybrat vše

lspci | egrep "VGA|3D"
00:02.0 VGA compatible controller: Intel Corporation Device 3e9b
01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Ti Mobile] (rev a1)
Výpis hardwaru:

Kód: Vybrat vše

elektronik@elektronik-G3-3779 ~ $ lshw -numeric -c display
WARNING: you should run this program as super-user.
  *-display               
       description: 3D controller
       product: GP107M [GeForce GTX 1050 Ti Mobile] [10DE:1C8C]
       vendor: NVIDIA Corporation [10DE]
       physical id: 0
       bus info: pci@0000:01:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list rom
       configuration: driver=nvidia latency=0
       resources: irq:16 memory:ec000000-ecffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:4000(size=128) memory:ed000000-ed07ffff
  *-display UNCLAIMED
       description: VGA compatible controller
       product: Intel Corporation [8086:3E9B]
       vendor: Intel Corporation [8086]
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: vga_controller bus_master cap_list
       configuration: latency=0
       resources: memory:eb000000-ebffffff memory:80000000-8fffffff ioport:5000(size=64) memory:c0000-dffff
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.
Výpis logu X11

Kód: Vybrat vše

cat /var/log/Xorg.0.log
[     5.468] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     5.468] X Protocol Version 11, Revision 0
[     5.468] Build Operating System: Linux 4.4.0-128-generic x86_64 Ubuntu
[     5.468] Current Operating System: Linux elektronik-G3-3779 4.10.0-38-generic #42~16.04.1-Ubuntu SMP Tue Oct 10 16:32:20 UTC 2017 x86_64
[     5.468] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-38-generic root=UUID=b25a1d09-2615-4ec9-ab51-69cb1d111453 ro quiet splash vt.handoff=7
[     5.468] Build Date: 10 August 2018  09:33:05AM
[     5.468] xorg-server 2:1.18.4-0ubuntu0.8 (For technical support please see http://www.ubuntu.com/support) 
[     5.468] Current version of pixman: 0.33.6
[     5.468] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.468] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.468] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr  3 13:45:01 2019
[     5.468] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.469] (==) No Layout section.  Using the first Screen section.
[     5.469] (==) No screen section available. Using defaults.
[     5.469] (**) |-->Screen "Default Screen Section" (0)
[     5.469] (**) |   |-->Monitor "<default monitor>"
[     5.469] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.469] (==) Automatically adding devices
[     5.469] (==) Automatically enabling devices
[     5.469] (==) Automatically adding GPU devices
[     5.469] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.469] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     5.469] 	Entry deleted from font path.
[     5.469] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     5.469] 	Entry deleted from font path.
[     5.469] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     5.469] 	Entry deleted from font path.
[     5.469] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     5.469] 	Entry deleted from font path.
[     5.469] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     5.469] 	Entry deleted from font path.
[     5.469] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     5.469] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     5.469] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.469] (II) Loader magic: 0x55a85d81adc0
[     5.469] (II) Module ABI versions:
[     5.469] 	X.Org ANSI C Emulation: 0.4
[     5.469] 	X.Org Video Driver: 20.0
[     5.469] 	X.Org XInput driver : 22.1
[     5.469] 	X.Org Server Extension : 9.0
[     5.469] (++) using VT number 7

[     5.469] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.469] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.473] (--) PCI:*(0:0:2:0) 8086:3e9b:1028:0870 rev 0, Mem @ 0xeb000000/16777216, 0x80000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     5.473] (--) PCI: (0:1:0:0) 10de:1c8c:1028:0870 rev 161, Mem @ 0xec000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     5.473] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     5.473] (II) "glx" will be loaded by default.
[     5.473] (II) LoadModule: "glx"
[     5.473] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.484] (II) Module glx: vendor="X.Org Foundation"
[     5.484] 	compiled for 1.18.4, module version = 1.0.0
[     5.484] 	ABI class: X.Org Server Extension, version 9.0
[     5.484] (==) AIGLX enabled
[     5.484] (==) Matched nvidia as autoconfigured driver 0
[     5.484] (==) Matched nouveau as autoconfigured driver 1
[     5.484] (==) Matched intel as autoconfigured driver 2
[     5.484] (==) Matched modesetting as autoconfigured driver 3
[     5.484] (==) Matched fbdev as autoconfigured driver 4
[     5.484] (==) Matched vesa as autoconfigured driver 5
[     5.484] (==) Assigned the driver to the xf86ConfigLayout
[     5.484] (II) LoadModule: "nvidia"
[     5.484] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     5.485] (II) Module nvidia: vendor="NVIDIA Corporation"
[     5.485] 	compiled for 4.0.2, module version = 1.0.0
[     5.485] 	Module class: X.Org Video Driver
[     5.485] (II) LoadModule: "nouveau"
[     5.485] (WW) Warning, couldn't open module nouveau
[     5.485] (II) UnloadModule: "nouveau"
[     5.485] (II) Unloading nouveau
[     5.485] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     5.485] (II) LoadModule: "intel"
[     5.485] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.488] (II) Module intel: vendor="X.Org Foundation"
[     5.488] 	compiled for 1.18.4, module version = 2.99.917
[     5.488] 	Module class: X.Org Video Driver
[     5.488] 	ABI class: X.Org Video Driver, version 20.0
[     5.488] (II) LoadModule: "modesetting"
[     5.489] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.489] (II) Module modesetting: vendor="X.Org Foundation"
[     5.489] 	compiled for 1.18.4, module version = 1.18.4
[     5.489] 	Module class: X.Org Video Driver
[     5.489] 	ABI class: X.Org Video Driver, version 20.0
[     5.489] (II) LoadModule: "fbdev"
[     5.489] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.490] (II) Module fbdev: vendor="X.Org Foundation"
[     5.490] 	compiled for 1.18.1, module version = 0.4.4
[     5.490] 	Module class: X.Org Video Driver
[     5.490] 	ABI class: X.Org Video Driver, version 20.0
[     5.490] (II) LoadModule: "vesa"
[     5.490] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.490] (II) Module vesa: vendor="X.Org Foundation"
[     5.490] 	compiled for 1.18.1, module version = 2.3.4
[     5.490] 	Module class: X.Org Video Driver
[     5.490] 	ABI class: X.Org Video Driver, version 20.0
[     5.490] (==) Matched nvidia as autoconfigured driver 0
[     5.490] (==) Matched nouveau as autoconfigured driver 1
[     5.490] (==) Matched intel as autoconfigured driver 2
[     5.490] (==) Matched modesetting as autoconfigured driver 3
[     5.490] (==) Matched fbdev as autoconfigured driver 4
[     5.490] (==) Matched vesa as autoconfigured driver 5
[     5.490] (==) Assigned the driver to the xf86ConfigLayout
[     5.490] (II) LoadModule: "nvidia"
[     5.490] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     5.490] (II) Module nvidia: vendor="NVIDIA Corporation"
[     5.490] 	compiled for 4.0.2, module version = 1.0.0
[     5.490] 	Module class: X.Org Video Driver
[     5.490] (II) UnloadModule: "nvidia"
[     5.490] (II) Unloading nvidia
[     5.490] (II) Failed to load module "nvidia" (already loaded, 21928)
[     5.490] (II) LoadModule: "nouveau"
[     5.491] (WW) Warning, couldn't open module nouveau
[     5.491] (II) UnloadModule: "nouveau"
[     5.491] (II) Unloading nouveau
[     5.491] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     5.491] (II) LoadModule: "intel"
[     5.491] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.491] (II) Module intel: vendor="X.Org Foundation"
[     5.491] 	compiled for 1.18.4, module version = 2.99.917
[     5.491] 	Module class: X.Org Video Driver
[     5.491] 	ABI class: X.Org Video Driver, version 20.0
[     5.491] (II) UnloadModule: "intel"
[     5.491] (II) Unloading intel
[     5.491] (II) Failed to load module "intel" (already loaded, 0)
[     5.491] (II) LoadModule: "modesetting"
[     5.491] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.491] (II) Module modesetting: vendor="X.Org Foundation"
[     5.491] 	compiled for 1.18.4, module version = 1.18.4
[     5.491] 	Module class: X.Org Video Driver
[     5.491] 	ABI class: X.Org Video Driver, version 20.0
[     5.491] (II) UnloadModule: "modesetting"
[     5.491] (II) Unloading modesetting
[     5.491] (II) Failed to load module "modesetting" (already loaded, 0)
[     5.491] (II) LoadModule: "fbdev"
[     5.491] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.491] (II) Module fbdev: vendor="X.Org Foundation"
[     5.491] 	compiled for 1.18.1, module version = 0.4.4
[     5.491] 	Module class: X.Org Video Driver
[     5.491] 	ABI class: X.Org Video Driver, version 20.0
[     5.491] (II) UnloadModule: "fbdev"
[     5.491] (II) Unloading fbdev
[     5.491] (II) Failed to load module "fbdev" (already loaded, 0)
[     5.491] (II) LoadModule: "vesa"
[     5.491] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.491] (II) Module vesa: vendor="X.Org Foundation"
[     5.491] 	compiled for 1.18.1, module version = 2.3.4
[     5.491] 	Module class: X.Org Video Driver
[     5.491] 	ABI class: X.Org Video Driver, version 20.0
[     5.491] (II) UnloadModule: "vesa"
[     5.491] (II) Unloading vesa
[     5.491] (II) Failed to load module "vesa" (already loaded, 0)
[     5.491] (II) NVIDIA dlloader X Driver  418.56  Fri Mar 15 12:37:35 CDT 2019
[     5.491] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     5.491] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     5.491] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     5.491] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     5.491] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     5.491] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.491] (II) FBDEV: driver for framebuffer: fbdev
[     5.491] (II) VESA: driver for VESA chipsets: vesa
[     5.491] (II) Loading sub module "fb"
[     5.491] (II) LoadModule: "fb"
[     5.491] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.492] (II) Module fb: vendor="X.Org Foundation"
[     5.492] 	compiled for 1.18.4, module version = 1.0.0
[     5.492] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.492] (II) Loading sub module "wfb"
[     5.492] (II) LoadModule: "wfb"
[     5.492] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     5.493] (II) Module wfb: vendor="X.Org Foundation"
[     5.493] 	compiled for 1.18.4, module version = 1.0.0
[     5.493] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.493] (II) Loading sub module "ramdac"
[     5.493] (II) LoadModule: "ramdac"
[     5.493] (II) Module "ramdac" already built-in
[     5.513] (WW) Falling back to old probe method for modesetting
[     5.513] (II) Loading sub module "fbdevhw"
[     5.513] (II) LoadModule: "fbdevhw"
[     5.513] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     5.514] (II) Module fbdevhw: vendor="X.Org Foundation"
[     5.514] 	compiled for 1.18.4, module version = 0.0.2
[     5.514] 	ABI class: X.Org Video Driver, version 20.0
[     5.514] (**) FBDEV(2): claimed PCI slot 0@0:2:0
[     5.514] (II) FBDEV(2): using default device
[     5.514] (WW) Falling back to old probe method for vesa
[     5.514] (EE) Screen 0 deleted because of no matching config section.
[     5.514] (II) UnloadModule: "modesetting"
[     5.514] (EE) Screen 0 deleted because of no matching config section.
[     5.514] (II) UnloadModule: "modesetting"
[     5.514] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.514] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     5.514] (==) FBDEV(0): RGB weight 888
[     5.514] (==) FBDEV(0): Default visual is TrueColor
[     5.514] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.514] (II) FBDEV(0): hardware: EFI VGA (video memory: 8128kB)
[     5.514] (II) FBDEV(0): checking modes against framebuffer device...
[     5.514] (II) FBDEV(0): checking modes against monitor...
[     5.514] (--) FBDEV(0): Virtual size is 1920x1080 (pitch 1920)
[     5.514] (**) FBDEV(0):  Built-in mode "current": 207.4 MHz, 85.3 kHz, 77.2 Hz
[     5.514] (II) FBDEV(0): Modeline "current"x0.0  207.38  1920 1952 2192 2432  1080 1084 1088 1104 -hsync -vsync -csync (85.3 kHz b)
[     5.514] (==) FBDEV(0): DPI set to (96, 96)
[     5.514] (II) Loading sub module "fb"
[     5.514] (II) LoadModule: "fb"
[     5.514] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.514] (II) Module fb: vendor="X.Org Foundation"
[     5.514] 	compiled for 1.18.4, module version = 1.0.0
[     5.514] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.514] (**) FBDEV(0): using shadow framebuffer
[     5.514] (II) Loading sub module "shadow"
[     5.514] (II) LoadModule: "shadow"
[     5.514] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     5.514] (II) Module shadow: vendor="X.Org Foundation"
[     5.514] 	compiled for 1.18.4, module version = 1.1.0
[     5.514] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.514] (II) UnloadModule: "vesa"
[     5.514] (II) Unloading vesa
[     5.514] (==) Depth 24 pixmap format is 32 bpp
[     5.515] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[     5.516] (==) FBDEV(0): Backing store enabled
[     5.516] (==) FBDEV(0): DPMS enabled
[     5.516] (==) RandR enabled
[     5.519] (II) SELinux: Disabled on system
[     5.519] (II) AIGLX: Screen 0 is not DRI2 capable
[     5.519] (EE) AIGLX: reverting to software rendering
[     5.553] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     5.553] (II) AIGLX: Loaded and initialized swrast
[     5.553] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     5.570] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     5.570] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.570] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.570] (II) LoadModule: "libinput"
[     5.570] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     5.571] (II) Module libinput: vendor="X.Org Foundation"
[     5.571] 	compiled for 1.18.4, module version = 0.18.0
[     5.571] 	Module class: X.Org XInput Driver
[     5.571] 	ABI class: X.Org XInput driver, version 22.1
[     5.571] (II) Using input driver 'libinput' for 'Power Button'
[     5.571] (**) Power Button: always reports core events
[     5.571] (**) Option "Device" "/dev/input/event3"
[     5.571] (**) Option "_source" "server/udev"
[     5.571] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     5.571] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     5.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     5.600] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.600] (**) Option "xkb_model" "pc105"
[     5.600] (**) Option "xkb_layout" "cz"
[     5.600] (**) Option "xkb_variant" "qwerty_bksl"
[     5.608] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     5.608] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     5.608] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     5.608] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.608] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.608] (II) Using input driver 'libinput' for 'Power Button'
[     5.608] (**) Power Button: always reports core events
[     5.608] (**) Option "Device" "/dev/input/event1"
[     5.608] (**) Option "_source" "server/udev"
[     5.608] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[     5.608] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[     5.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     5.624] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     5.624] (**) Option "xkb_model" "pc105"
[     5.624] (**) Option "xkb_layout" "cz"
[     5.624] (**) Option "xkb_variant" "qwerty_bksl"
[     5.624] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[     5.624] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[     5.624] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     5.624] (II) No input driver specified, ignoring this device.
[     5.624] (II) This device may have been added with another device file.
[     5.624] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     5.624] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     5.624] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     5.624] (II) Using input driver 'libinput' for 'Sleep Button'
[     5.624] (**) Sleep Button: always reports core events
[     5.624] (**) Option "Device" "/dev/input/event2"
[     5.624] (**) Option "_source" "server/udev"
[     5.624] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[     5.624] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[     5.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[     5.648] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     5.648] (**) Option "xkb_model" "pc105"
[     5.648] (**) Option "xkb_layout" "cz"
[     5.648] (**) Option "xkb_variant" "qwerty_bksl"
[     5.648] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[     5.648] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[     5.648] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event9)
[     5.648] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[     5.648] (**) Integrated Webcam: Applying InputClass "libinput keyboard catchall"
[     5.648] (II) Using input driver 'libinput' for 'Integrated Webcam'
[     5.648] (**) Integrated Webcam: always reports core events
[     5.648] (**) Option "Device" "/dev/input/event9"
[     5.648] (**) Option "_source" "server/udev"
[     5.648] (II) input device 'Integrated Webcam', /dev/input/event9 is tagged by udev as: Keyboard
[     5.648] (II) input device 'Integrated Webcam', /dev/input/event9 is a keyboard
[     5.696] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input10/event9"
[     5.696] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD, id 9)
[     5.696] (**) Option "xkb_model" "pc105"
[     5.696] (**) Option "xkb_layout" "cz"
[     5.696] (**) Option "xkb_variant" "qwerty_bksl"
[     5.696] (II) input device 'Integrated Webcam', /dev/input/event9 is tagged by udev as: Keyboard
[     5.696] (II) input device 'Integrated Webcam', /dev/input/event9 is a keyboard
[     5.696] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7)
[     5.696] (II) No input driver specified, ignoring this device.
[     5.696] (II) This device may have been added with another device file.
[     5.696] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event8)
[     5.696] (II) No input driver specified, ignoring this device.
[     5.696] (II) This device may have been added with another device file.
[     5.696] (II) config/udev: Adding input device Intel HID events (/dev/input/event6)
[     5.696] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[     5.696] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     5.696] (II) Using input driver 'libinput' for 'Intel HID events'
[     5.696] (**) Intel HID events: always reports core events
[     5.696] (**) Option "Device" "/dev/input/event6"
[     5.696] (**) Option "_source" "server/udev"
[     5.697] (II) input device 'Intel HID events', /dev/input/event6 is tagged by udev as: Keyboard
[     5.697] (II) input device 'Intel HID events', /dev/input/event6 is a keyboard
[     5.712] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input7/event6"
[     5.712] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 10)
[     5.712] (**) Option "xkb_model" "pc105"
[     5.712] (**) Option "xkb_layout" "cz"
[     5.712] (**) Option "xkb_variant" "qwerty_bksl"
[     5.712] (II) input device 'Intel HID events', /dev/input/event6 is tagged by udev as: Keyboard
[     5.712] (II) input device 'Intel HID events', /dev/input/event6 is a keyboard
[     5.712] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     5.712] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     5.712] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     5.712] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     5.712] (**) AT Translated Set 2 keyboard: always reports core events
[     5.712] (**) Option "Device" "/dev/input/event4"
[     5.712] (**) Option "_source" "server/udev"
[     5.712] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event4 is tagged by udev as: Keyboard
[     5.712] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event4 is a keyboard
[     5.728] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     5.728] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     5.728] (**) Option "xkb_model" "pc105"
[     5.728] (**) Option "xkb_layout" "cz"
[     5.728] (**) Option "xkb_variant" "qwerty_bksl"
[     5.728] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event4 is tagged by udev as: Keyboard
[     5.728] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event4 is a keyboard
[     5.728] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[     5.728] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     5.728] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[     5.728] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     5.728] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     5.728] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     5.728] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchscreen catchall"
[     5.728] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[     5.728] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     5.728] (**) Option "Device" "/dev/input/event5"
[     5.728] (**) Option "_source" "server/udev"
[     5.728] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event5 is tagged by udev as: Touchpad Touchscreen
[     5.728] (II) SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     5.728] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event5 is a touchpad
[     5.760] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[     5.760] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[     5.760] (**) Option "AccelerationScheme" "none"
[     5.760] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[     5.760] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     5.760] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     5.760] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event5 is tagged by udev as: Touchpad Touchscreen
[     5.760] (II) SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     5.760] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event5 is a touchpad
[     5.760] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     5.760] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     5.761] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event10)
[     5.761] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     5.761] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.761] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[     5.761] (**) Dell WMI hotkeys: always reports core events
[     5.761] (**) Option "Device" "/dev/input/event10"
[     5.761] (**) Option "_source" "server/udev"
[     5.761] (II) input device 'Dell WMI hotkeys', /dev/input/event10 is tagged by udev as: Keyboard
[     5.761] (II) input device 'Dell WMI hotkeys', /dev/input/event10 is a keyboard
[     5.776] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event10"
[     5.776] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[     5.776] (**) Option "xkb_model" "pc105"
[     5.776] (**) Option "xkb_layout" "cz"
[     5.776] (**) Option "xkb_variant" "qwerty_bksl"
[     5.776] (II) input device 'Dell WMI hotkeys', /dev/input/event10 is tagged by udev as: Keyboard
[     5.776] (II) input device 'Dell WMI hotkeys', /dev/input/event10 is a keyboard
Glxinfo:

Kód: Vybrat vše

glxinfo -v
name of display: :0
X Error of failed request:  BadValue (integer parameter out of range for operation)
  Major opcode of failed request:  154 (GLX)
  Minor opcode of failed request:  24 (X_GLXCreateNewContext)
  Value in failed request:  0x0
  Serial number of failed request:  35
  Current serial number in output stream:  36
var/log/gpu-manager.log

Kód: Vybrat vše

log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-38-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-38-generic/updates/dkms
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:3e9b
BusID "PCI:0@0:2:0"
Is boot vga? yes
Error: can't access /sys/bus/pci/devices/0000:00:02.0/driver
The device is not bound to any driver. Skipping...
Vendor/Device Id: 10de:1c8c
BusID "PCI:1@0:0:0"
Is boot vga? no
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-418/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-418/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? no
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
Single card detected
No change - nothing to do
Systém

Kód: Vybrat vše

Linux elektronik-G3-3779 4.10.0-38-generic #42~16.04.1-Ubuntu SMP Tue Oct 10 16:32:20 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
Předpokládám, že to souvisí s ovladači pro intel i nvidia grafiku, ale už nevím jak z toho ven. Najde se někdo, kdo je schopný i ochotný mi poradit jak mám dále postupovat?

menom
Guru Mintu
Příspěvky: 1559
Registrován: 12 pro 2012, 15:10

Re: Dell G3 17" I7-8750H instalace

#2 Příspěvek od menom » 03 dub 2019, 15:43

.
sudo ubuntu-drivers autoinstall
Naco takto, v Linux Mint je na instalaciu grafickeho ovladaca klikaci program, nazov ma asi Ovladace hardveru
alebo podobne.

Tam je pekne videt dostupne ovladace, tam vyskusaj preinstalovat.

.

Adem
Příspěvky: 63
Registrován: 20 dub 2016, 13:21

Re: Dell G3 17" I7-8750H instalace

#3 Příspěvek od Adem » 03 dub 2019, 18:11

Nebudu na to odborně stačit a nemám Dell NB, ale...
EDIT: Ke grafice Intel v i7-8xxx. Doufám, že ta bude v jádru pro LM18.3 podporovaná, podobně jako u i3-8xxx.
Ke grafice nVidia - Prostředí Cinamon je náročnější a nemusí nějaké zobrazovací nesrovnalosti přežít. Havaroval mi v LM 17.3 po změně ovladače na nVidia u staré karty.
Vsadil bych na zkoušku instalace s prostředím XFCE, potom MATE. Netrvá to dlouho a viděl bys, co to udělá.
Nyní mám LM 18.3 MATE a na PC mi s i3 a GTX 1050 funguje dobře. Po instalaci byl ovladač s otevřeným kódem, pak jsem ho zaměnil za nVidia 384.130 nabízený v Ovládací panely, Správce ovl. (po updatech). Lepší chod videí.
Naposledy upravil(a) Adem dne 03 dub 2019, 19:45, celkem upraveno 1 x.
LinuxMint 18.3 MATE 64b, i3-8100, RAM 16GB, SSD 240GB, nVidia GTX1050 2GB. - Kodi 17.6 Krypton

Uživatelský avatar
redhawk
Guru Mintu
Příspěvky: 2703
Registrován: 12 led 2016, 19:14
Bydliště: ako kedy
Kontaktovat uživatele:

Re: Dell G3 17" I7-8750H instalace

#4 Příspěvek od redhawk » 03 dub 2019, 19:23

pre ten stroj odporucam LM 19.1
nejde len o ovladace ale aj o kniznice k nim a LM18.x v podstate utlmuje.

Popripade skusit ine prostredie ale osobne by som sa nespoliehal na LM18.x
Pravděpodobně kecám.

koroncz
Příspěvky: 2
Registrován: 03 dub 2019, 13:31

Re: Dell G3 17" I7-8750H instalace

#5 Příspěvek od koroncz » 03 dub 2019, 21:15

Díky za rady, zítra zkusím 18.3 Mate a pokud to nevyjde tak 19.1 Mate.

Odpovědět