Kód: Vybrat vše
http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-TKód: Vybrat vše
uname -aKód: Vybrat vše
dmesgKód: Vybrat vše
[20066.856374] hub 1-0:1.0: unable to enumerate USB device on port 1
[20067.276134] hub 1-0:1.0: unable to enumerate USB device on port 1
[20067.472135] hub 2-0:1.0: unable to enumerate USB device on port 1
[20067.656345] hub 1-0:1.0: unable to enumerate USB device on port 1
[20068.044113] usb 1-1: new high-speed USB device number 64 using ehci-pci
[20069.240365] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[20069.684130] hub 2-0:1.0: unable to enumerate USB device on port 1
[20070.072176] hub 1-0:1.0: unable to enumerate USB device on port 1
[20070.556155] hub 1-0:1.0: unable to enumerate USB device on port 1
[20071.008130] hub 1-0:1.0: unable to enumerate USB device on port 1
[20071.524153] hub 1-0:1.0: unable to enumerate USB device on port 1
[20072.416127] hub 1-0:1.0: unable to enumerate USB device on port 1
[20073.384134] hub 1-0:1.0: unable to enumerate USB device on port 1
[20073.636096] usb 2-1: new full-speed USB device number 106 using uhci_hcd
[20073.704136] hub 2-0:1.0: unable to enumerate USB device on port 1
[20074.124145] hub 1-0:1.0: unable to enumerate USB device on port 1
[20074.376083] usb 2-1: new full-speed USB device number 107 using uhci_hcd
[20075.016101] usb 2-1: device not accepting address 107, error -71
[20075.072152] hub 2-0:1.0: unable to enumerate USB device on port 1
[20075.460127] hub 1-0:1.0: unable to enumerate USB device on port 1
[20076.104138] hub 1-0:1.0: unable to enumerate USB device on port 1
[20076.300133] hub 2-0:1.0: unable to enumerate USB device on port 1
[20077.360148] usb 2-1: new full-speed USB device number 110 using uhci_hcd
[20077.428136] hub 2-0:1.0: unable to enumerate USB device on port 1
[20078.268139] hub 1-0:1.0: unable to enumerate USB device on port 1
[20078.520140] usb 2-1: new full-speed USB device number 111 using uhci_hcd
[20078.588164] hub 2-0:1.0: unable to enumerate USB device on port 1
[20079.020157] hub 1-0:1.0: unable to enumerate USB device on port 1
[20079.272097] usb 2-1: new full-speed USB device number 112 using uhci_hcd
[20079.944089] usb 2-1: device not accepting address 112, error -71
[20080.000165] hub 2-0:1.0: unable to enumerate USB device on port 1
[20080.572159] hub 2-0:1.0: unable to enumerate USB device on port 1
[20081.264105] usb 2-1: new full-speed USB device number 115 using uhci_hcd
[20081.432145] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20081.432161] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20083.456162] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[20083.456188] usb 2-1: USB disconnect, device number 115
[20083.648139] hub 2-0:1.0: unable to enumerate USB device on port 1
[20084.260140] hub 1-0:1.0: unable to enumerate USB device on port 1
[20085.208107] usb 2-1: new full-speed USB device number 117 using uhci_hcd
[20085.356094] usb 2-1: device descriptor read/all, error -71
[20085.412148] hub 2-0:1.0: unable to enumerate USB device on port 1
[20086.104123] usb 2-1: new full-speed USB device number 119 using uhci_hcd
[20086.273133] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20086.273149] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20087.424153] usb 2-1: USB disconnect, device number 119
[20088.348128] hub 2-0:1.0: unable to enumerate USB device on port 1
[20089.104115] usb 2-1: new full-speed USB device number 121 using uhci_hcd
[20089.272134] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20089.272150] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20125.864156] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[20125.864182] usb 2-1: USB disconnect, device number 121
[20126.052149] hub 2-0:1.0: unable to enumerate USB device on port 1
[20126.884101] usb 2-1: new full-speed USB device number 123 using uhci_hcd
[20127.052140] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20127.052156] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20130.328147] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[20130.328172] usb 2-1: USB disconnect, device number 123
[20131.092099] usb 2-1: new full-speed USB device number 124 using uhci_hcd
[20131.259147] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20131.259163] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20132.312141] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[20132.312166] usb 2-1: USB disconnect, device number 124
[20132.868144] hub 1-0:1.0: unable to enumerate USB device on port 1
[20133.964330] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[20134.408153] hub 2-0:1.0: unable to enumerate USB device on port 1
[20135.600274] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[20136.304115] usb 2-1: new full-speed USB device number 126 using uhci_hcd
[20136.372139] hub 2-0:1.0: unable to enumerate USB device on port 1
[20137.328142] hub 1-0:1.0: unable to enumerate USB device on port 1
[20137.580097] usb 2-1: new full-speed USB device number 127 using uhci_hcd
[20137.856143] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20137.856159] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20140.568134] usb 2-1: USB disconnect, device number 127
[20141.084126] hub 1-0:1.0: unable to enumerate USB device on port 1
[20141.336094] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[20141.644146] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20141.644161] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20614.546395] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.548059] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.551106] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.552683] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.555756] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.555780] hub 1-0:1.0: hub_port_status failed (err = -32)
[20614.960417] hub 1-0:1.0: unable to enumerate USB device on port 1
[20615.476170] usb 2-1: USB disconnect, device number 2
[20615.724119] usb 2-1: new full-speed USB device number 3 using uhci_hcd
[20615.890419] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20615.890435] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20618.392169] usb 2-1: USB disconnect, device number 3
[20620.448123] usb 1-1: new high-speed USB device number 97 using ehci-pci
[20621.056129] hub 1-0:1.0: unable to enumerate USB device on port 1
[21179.016130] hub 1-0:1.0: unable to enumerate USB device on port 1
[21179.212142] hub 2-0:1.0: unable to enumerate USB device on port 1
[21180.252258] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21180.696159] hub 2-0:1.0: unable to enumerate USB device on port 1
[21181.084157] hub 1-0:1.0: unable to enumerate USB device on port 1
[21183.528391] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21183.972127] hub 2-0:1.0: unable to enumerate USB device on port 1
[21194.772149] hub 1-0:1.0: unable to enumerate USB device on port 1
[21195.024090] usb 2-1: new full-speed USB device number 7 using uhci_hcd
[21195.231131] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21195.231147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21201.192139] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21201.192159] usb 2-1: USB disconnect, device number 7
[21201.388142] hub 2-0:1.0: unable to enumerate USB device on port 1
[21201.776128] hub 1-0:1.0: unable to enumerate USB device on port 1
[21204.324282] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21204.768162] hub 2-0:1.0: unable to enumerate USB device on port 1
[21205.768357] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21206.212150] hub 2-0:1.0: unable to enumerate USB device on port 1
[21207.012120] hub 1-0:1.0: unable to enumerate USB device on port 1
[21207.208158] hub 2-0:1.0: unable to enumerate USB device on port 1
[21208.208269] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21212.076131] hub 1-0:1.0: unable to enumerate USB device on port 1
[21214.936149] hub 1-0:1.0: unable to enumerate USB device on port 1
[21216.604393] hub 1-0:1.0: unable to enumerate USB device on port 1
[21217.636313] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21218.080159] hub 2-0:1.0: unable to enumerate USB device on port 1
[21218.876164] hub 1-0:1.0: unable to enumerate USB device on port 1
[21220.360144] hub 1-0:1.0: unable to enumerate USB device on port 1
[21220.812125] hub 1-0:1.0: unable to enumerate USB device on port 1
[21221.928140] hub 1-0:1.0: unable to enumerate USB device on port 1
[21222.180119] usb 2-1: new full-speed USB device number 13 using uhci_hcd
[21222.347123] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21222.347139] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21227.480167] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21227.480193] usb 2-1: USB disconnect, device number 13
[21228.468130] hub 1-0:1.0: unable to enumerate USB device on port 1
[21229.564265] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21229.824139] hub 1-0:1.0: unable to enumerate USB device on port 1
[21230.856344] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21231.300162] hub 2-0:1.0: unable to enumerate USB device on port 1
[21232.332293] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21232.776171] hub 2-0:1.0: unable to enumerate USB device on port 1
[21233.164129] hub 1-0:1.0: unable to enumerate USB device on port 1
[21234.196353] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21234.456137] hub 1-0:1.0: unable to enumerate USB device on port 1
[21237.580107] usb 2-1: new full-speed USB device number 16 using uhci_hcd
[21237.749131] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21237.749147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21241.368153] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21241.368179] usb 2-1: USB disconnect, device number 16
[21241.560165] hub 2-0:1.0: unable to enumerate USB device on port 1
[21242.784299] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21243.228134] hub 2-0:1.0: unable to enumerate USB device on port 1
[21244.228373] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21244.672161] hub 2-0:1.0: unable to enumerate USB device on port 1
[21245.672321] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21246.116149] hub 2-0:1.0: unable to enumerate USB device on port 1
[21247.116283] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21247.560133] hub 2-0:1.0: unable to enumerate USB device on port 1
[21248.560338] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21249.004194] hub 2-0:1.0: unable to enumerate USB device on port 1
[21250.004294] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21250.504121] usb 2-1: new full-speed USB device number 23 using uhci_hcd
[21250.672118] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21250.672135] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21262.696160] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21262.696178] usb 2-1: USB disconnect, device number 23
[21262.892168] hub 2-0:1.0: unable to enumerate USB device on port 1
[21263.892302] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21264.336120] hub 2-0:1.0: unable to enumerate USB device on port 1
[21265.336390] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21265.780137] hub 2-0:1.0: unable to enumerate USB device on port 1
[21266.780324] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21267.224156] hub 2-0:1.0: unable to enumerate USB device on port 1
[21268.224276] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21268.668133] hub 2-0:1.0: unable to enumerate USB device on port 1
[21269.340097] usb 2-1: new full-speed USB device number 29 using uhci_hcd
[21269.509133] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21269.509148] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21270.880158] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21270.880182] usb 2-1: USB disconnect, device number 29
[21271.068139] hub 2-0:1.0: unable to enumerate USB device on port 1
[21272.112263] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21272.372126] hub 1-0:1.0: unable to enumerate USB device on port 1
[21272.568144] hub 2-0:1.0: unable to enumerate USB device on port 1
[21272.956148] hub 1-0:1.0: unable to enumerate USB device on port 1
[21273.484164] hub 1-0:1.0: unable to enumerate USB device on port 1
[21274.032132] hub 1-0:1.0: unable to enumerate USB device on port 1
[21274.584152] hub 1-0:1.0: unable to enumerate USB device on port 1
[21275.448097] usb 2-1: new full-speed USB device number 32 using uhci_hcd
[21275.617133] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21275.617149] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21276.088167] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21276.088192] usb 2-1: USB disconnect, device number 32
[21276.276140] hub 2-0:1.0: unable to enumerate USB device on port 1
[21277.072128] hub 1-0:1.0: unable to enumerate USB device on port 1
[21277.968187] hub 1-0:1.0: unable to enumerate USB device on port 1
[21278.548148] hub 1-0:1.0: unable to enumerate USB device on port 1
[21279.672149] hub 1-0:1.0: unable to enumerate USB device on port 1
[21280.764117] hub 1-0:1.0: unable to enumerate USB device on port 1
[21281.940169] hub 1-0:1.0: unable to enumerate USB device on port 1
[21283.636142] hub 1-0:1.0: unable to enumerate USB device on port 1
[21285.360133] hub 1-0:1.0: unable to enumerate USB device on port 1
[21286.608136] hub 1-0:1.0: unable to enumerate USB device on port 1
[21288.256094] usb 2-1: new full-speed USB device number 34 using uhci_hcd
[21288.425132] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21288.425147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21293.944157] usb 2-1: USB disconnect, device number 34
[21294.472112] hub 1-0:1.0: unable to enumerate USB device on port 1
[21296.196110] usb 2-1: new full-speed USB device number 35 using uhci_hcd
[21296.363141] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21296.363156] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21297.264146] usb 2-1: USB disconnect, device number 35
[21297.508092] usb 2-1: new full-speed USB device number 36 using uhci_hcd
[21297.674092] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21297.674108] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21302.049747] wlan0: authenticate with a0:f3:c1:69:66:2e
[21302.061437] wlan0: send auth to a0:f3:c1:69:66:2e (try 1/3)
[21302.063853] wlan0: authenticated
[21302.068079] wlan0: associate with a0:f3:c1:69:66:2e (try 1/3)
[21302.072605] wlan0: RX AssocResp from a0:f3:c1:69:66:2e (capab=0x431 status=0 aid=4)
[21302.072872] wlan0: associated
[21302.072997] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[21302.073226] cfg80211: Calling CRDA for country: CZ
[21302.401097] ath: regdomain 0x80cb updated by CountryIE
[21302.401105] ath: EEPROM regdomain: 0x80cb
[21302.401109] ath: EEPROM indicates we should expect a country code
[21302.401113] ath: doing EEPROM country->regdmn map search
[21302.401117] ath: country maps to regdmn code: 0x36
[21302.401122] ath: Country alpha2 being used: CZ
[21302.401125] ath: Regpair used: 0x36
[21302.401171] cfg80211: Regulatory domain changed to country: CZ
[21302.401175] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[21302.401181] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[21302.401185] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[21302.401190] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[21302.401195] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[21307.777507] asus_wmi: Unknown key 58 pressed
[21671.546102] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[21671.549362] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[21693.722600] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[21801.734562] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[21834.457163] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[21917.157534] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[22126.685429] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[22220.478846] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[22260.625799] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[22392.271660] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[22895.117595] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[23197.549559] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[23245.539432] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24301.451512] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[24312.931145] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24498.744545] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[24540.275302] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24633.628580] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[24637.684646] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24722.879991] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[24871.854850] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24871.855644] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25029.554993] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[25122.834857] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25395.316808] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[25495.947115] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25503.567973] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[25622.107194] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25722.976159] usb 2-1: USB disconnect, device number 36
[25723.744120] usb 2-1: new full-speed USB device number 37 using uhci_hcd
[25723.911158] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[25723.911180] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[25865.030853] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[25865.036952] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25868.144890] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[26054.944276] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[26165.058415] systemd-timedated[7894]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
[26170.034464] usb 1-5: USB disconnect, device number 3
[26175.084090] usb 1-5: new high-speed USB device number 53 using ehci-pci
[26175.217711] usb 1-5: New USB device found, idVendor=058f, idProduct=6366
[26175.217727] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26175.217738] usb 1-5: Product: Mass Storage Device
[26175.217747] usb 1-5: Manufacturer: Generic
[26175.217756] usb 1-5: SerialNumber: 058F63666433
[26175.218552] scsi3 : usb-storage 1-5:1.0
[26176.345174] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[26176.356389] sd 3:0:0:0: Attached scsi generic sg1 type 0
[26177.014741] sd 3:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
[26177.015842] sd 3:0:0:0: [sdb] Write Protect is off
[26177.015866] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[26177.017476] sd 3:0:0:0: [sdb] No Caching mode page present
[26177.017499] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[26177.023969] sd 3:0:0:0: [sdb] No Caching mode page present
[26177.023990] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[26177.025537] sdb: sdb1
[26177.034068] sd 3:0:0:0: [sdb] No Caching mode page present
[26177.034082] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[26177.034095] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[26542.135025] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[26542.138585] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[26652.544183] usb 2-1: USB disconnect, device number 37
[26652.792133] usb 2-1: new full-speed USB device number 38 using uhci_hcd
[26652.958348] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[26652.958364] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[26661.700396] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[26757.696153] usb 2-1: USB disconnect, device number 38
[26757.940097] usb 2-1: new full-speed USB device number 39 using uhci_hcd
[26758.107620] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[26758.107636] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[26822.642367] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[26834.793132] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[26923.302052] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[26953.886187] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27151.464219] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27170.325483] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27267.558510] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27271.131798] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27345.402043] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27357.112438] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27505.786390] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27852.295205] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27944.663015] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27953.080811] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[28157.390496] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[28170.149486] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[28449.305264] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[28467.856147] usb 2-1: USB disconnect, device number 39
[28468.688211] usb 2-1: new full-speed USB device number 40 using uhci_hcd
[28468.856155] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28468.856174] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28489.416649] usb 2-1: USB disconnect, device number 40
[28490.180144] usb 2-1: new full-speed USB device number 41 using uhci_hcd
[28490.352170] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28490.352193] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28491.712260] usb 2-1: USB disconnect, device number 41
[28491.952101] usb 2-1: new full-speed USB device number 42 using uhci_hcd
[28492.123099] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28492.123113] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28494.376158] usb 2-1: USB disconnect, device number 42
[28494.904144] hub 1-0:1.0: unable to enumerate USB device on port 1
[28495.156234] usb 2-1: new full-speed USB device number 43 using uhci_hcd
[28495.359176] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28495.359192] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28568.776283] usb 2-1: USB disconnect, device number 43
[28569.540125] usb 2-1: new full-speed USB device number 44 using uhci_hcd
[28569.707199] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28569.707220] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28718.157920] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[28771.392122] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[28771.392139] usb 2-1: USB disconnect, device number 44
[28771.584160] hub 2-0:1.0: unable to enumerate USB device on port 1
[28772.380146] hub 1-0:1.0: unable to enumerate USB device on port 1
[28772.632175] usb 2-1: new full-speed USB device number 46 using uhci_hcd
[28772.800171] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28772.800184] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28825.771149] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[28847.945987] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[28967.365885] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[28977.881028] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[29084.802448] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[29129.436863] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[29133.086159] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[29266.661106] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[29266.661245] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[29280.950674] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[29369.334143] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[29374.983429] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[29595.482771] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[30016.899111] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[30253.126378] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[30258.377776] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[30301.552138] usb 2-1: USB disconnect, device number 46
[30302.340124] usb 2-1: new full-speed USB device number 47 using uhci_hcd
[30302.508132] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30302.508156] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30307.132146] usb 2-1: USB disconnect, device number 47
[30307.384458] usb 2-1: new full-speed USB device number 48 using uhci_hcd
[30307.550919] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30307.550933] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30324.616274] usb 2-1: USB disconnect, device number 48
[30326.064431] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[30326.304867] hub 2-0:1.0: unable to enumerate USB device on port 1
[30327.080187] hub 2-0:1.0: unable to enumerate USB device on port 1
[30328.060164] hub 2-0:1.0: unable to enumerate USB device on port 1
[30328.836646] hub 2-0:1.0: unable to enumerate USB device on port 1
[30329.632170] hub 1-0:1.0: unable to enumerate USB device on port 1
[30329.884273] usb 2-1: new full-speed USB device number 53 using uhci_hcd
[30330.150345] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30330.150367] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30332.056209] usb 2-1: USB disconnect, device number 53
[30333.232126] usb 2-1: new full-speed USB device number 54 using uhci_hcd
[30333.300119] hub 2-0:1.0: unable to enumerate USB device on port 1
[30334.096221] hub 1-0:1.0: unable to enumerate USB device on port 1
[30335.032167] hub 1-0:1.0: unable to enumerate USB device on port 1
[30335.412134] usb 2-1: new full-speed USB device number 55 using uhci_hcd
[30335.624227] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30335.624241] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30600.144162] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[30600.144189] usb 2-1: USB disconnect, device number 55
[30601.036245] usb 2-1: new full-speed USB device number 56 using uhci_hcd
[30601.205135] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30601.205148] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31128.195132] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[31292.604072] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[31292.609295] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[31294.019239] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[31455.674608] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[31672.426892] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[31773.928175] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[31773.928197] usb 2-1: USB disconnect, device number 56
[31775.116128] usb 2-1: new full-speed USB device number 57 using uhci_hcd
[31775.283112] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[31775.283122] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31844.892380] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[31900.222003] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[32292.247148] systemd-hostnamed[11365]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[32827.331493] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[32830.989141] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[33199.432199] usb 2-1: USB disconnect, device number 57
[33200.420118] usb 2-1: new full-speed USB device number 58 using uhci_hcd
[33200.586541] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[33200.586557] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[33385.657468] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[33426.286155] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[33434.070988] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[33482.038631] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[33530.040189] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[33552.752663] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[33552.752776] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[33859.186320] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[33878.952135] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[33878.952154] usb 2-1: USB disconnect, device number 58
[33885.424264] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[33885.868131] hub 2-0:1.0: unable to enumerate USB device on port 1
[33886.868338] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[33887.312127] hub 2-0:1.0: unable to enumerate USB device on port 1
[33887.924158] hub 1-0:1.0: unable to enumerate USB device on port 1
[33889.581255] hub 1-0:1.0: unable to enumerate USB device on port 1
[33889.832135] usb 2-1: new full-speed USB device number 61 using uhci_hcd
[33890.196139] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[33890.196153] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[34140.605500] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[34173.055976] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[34400.307685] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35253.900492] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[35253.901280] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35352.830008] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[35442.471444] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35519.233090] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[35643.119652] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35757.335521] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[35987.376371] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35991.453277] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[36073.943754] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[36121.325193] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[36260.499821] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[36262.060196] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[36366.527666] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[36714.808829] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[36840.971001] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[36868.052916] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37039.605867] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37088.112198] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[37159.726671] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[37214.426927] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37322.124467] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37366.024944] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37370.097731] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[37418.048168] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[37466.040219] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[37502.640926] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37502.641038] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[37679.915581] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37852.265656] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37853.029343] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37927.425104] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37940.267822] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38086.467590] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38180.383318] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38263.628563] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38278.505287] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38372.341289] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38534.873313] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38642.780324] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38798.098556] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38879.666215] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38883.994920] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38970.260218] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[39000.382633] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[39113.867862] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[39133.589053] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[39207.816976] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[39252.868151] usb 1-3: new high-speed USB device number 83 using ehci-pci
[39253.006626] usb 1-3: New USB device found, idVendor=0b05, idProduct=1779
[39253.006641] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[39253.006652] usb 1-3: Product: AF9035A USB Device
[39253.006662] usb 1-3: Manufacturer: Afa Technologies Inc.
[39253.006671] usb 1-3: SerialNumber: CT701A024900378
[39253.794484] usbcore: registered new interface driver dvb_usb_af9035
[39253.794757] usb 1-3: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state
[39253.862168] usb 1-3: dvb_usb_v2: Did not find the firmware file 'dvb-usb-af9035-02.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[39253.862184] usb 1-3: dvb_usb_v2: 'Asus U3100Mini Plus' error while loading driver (-2)
[39253.862209] usb 1-3: dvb_usb_v2: 'Asus U3100Mini Plus' successfully deinitialized and disconnected
[39253.929342] usbcore: registered new interface driver usbhid
[39253.929352] usbhid: USB HID core driver
[39253.977366] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input10
[39253.977800] hid-generic 0003:0B05:1779.0001: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:1d.7-3/input1
jan@jan-1001PXD ~ $
Kód: Vybrat vše
[39253.862168] usb 1-3: dvb_usb_v2: Did not find the firmware file 'dvb-usb-af9035-02.fw'.Kód: Vybrat vše
http://palosaari.fi/linux/v4l-dvb/firmware/af9035/Kód: Vybrat vše
dvb-usb-af9035-02.fwFile must be named as dvb-usb-af9035-02.fw and put the correct location eg. /lib/firmware/dvb-usb-af9035-02.fw
Kód: Vybrat vše
[ 0.184490] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184678] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.184859] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.184868] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.184877] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184999] pnp 00:09: Plug and Play ACPI device, IDs ETD0100 SYN0a00 SYN0002 PNP0f13 (active)
[ 0.185149] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.185159] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.185720] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.185729] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.185736] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.185743] system 00:0b: [mem 0x00100000-0x7f6fffff] could not be reserved
[ 0.185751] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.185759] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.186167] pnp: PnP ACPI: found 12 devices
[ 0.186173] ACPI: ACPI bus type pnp unregistered
[ 0.186180] PnPBIOS: Disabled by ACPI PNP
[ 0.226225] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.226238] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.226246] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.226262] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
[ 0.226278] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.226303] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.226311] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.226318] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.226325] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.226332] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.226345] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f700000-0x7f8fffff]
[ 0.226354] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f900000-0x7fafffff 64bit pref]
[ 0.226363] pci 0000:00:1c.3: BAR 15: assigned [mem 0x7fb00000-0x7fcfffff 64bit pref]
[ 0.226373] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.226382] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.226389] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.226398] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.226408] pci 0000:00:1c.0: bridge window [mem 0x7f700000-0x7f8fffff]
[ 0.226416] pci 0000:00:1c.0: bridge window [mem 0x7f900000-0x7fafffff 64bit pref]
[ 0.226428] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.226435] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.226444] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.226453] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.226464] pci 0000:00:1c.3: PCI bridge to [bus 01]
[ 0.226471] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.226481] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.226490] pci 0000:00:1c.3: bridge window [mem 0x7fb00000-0x7fcfffff 64bit pref]
[ 0.226501] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.226523] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.226559] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.226599] pci 0000:00:1e.0: setting latency timer to 64
[ 0.226609] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.226615] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.226621] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.226627] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.226634] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff]
[ 0.226640] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.226646] pci_bus 0000:04: resource 1 [mem 0x7f700000-0x7f8fffff]
[ 0.226653] pci_bus 0000:04: resource 2 [mem 0x7f900000-0x7fafffff 64bit pref]
[ 0.226659] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.226665] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.226671] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.226678] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.226684] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.226690] pci_bus 0000:01: resource 2 [mem 0x7fb00000-0x7fcfffff 64bit pref]
[ 0.226697] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.226703] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.226709] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.226715] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.226721] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff]
[ 0.226790] NET: Registered protocol family 2
[ 0.227080] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.227141] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.227198] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.227239] TCP: reno registered
[ 0.227247] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.227264] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.227390] NET: Registered protocol family 1
[ 0.227423] pci 0000:00:02.0: Boot video device
[ 0.227643] PCI: CLS 32 bytes, default 64
[ 0.227758] Trying to unpack rootfs image as initramfs...
[ 1.498495] Freeing initrd memory: 30440k freed
[ 1.523721] Initialise module verification
[ 1.523819] audit: initializing netlink socket (disabled)
[ 1.523843] type=2000 audit(1378981783.520:1): initialized
[ 1.569329] bounce pool size: 64 pages
[ 1.569361] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.573239] VFS: Disk quotas dquot_6.5.2
[ 1.573364] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.574793] fuse init (API version 7.20)
[ 1.575003] msgmni has been set to 1719
[ 1.576127] Key type asymmetric registered
[ 1.576137] Asymmetric key parser 'x509' registered
[ 1.576251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.576334] io scheduler noop registered
[ 1.576342] io scheduler deadline registered (default)
[ 1.576363] io scheduler cfq registered
[ 1.576646] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.576807] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 1.576963] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 1.577103] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.577142] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.577273] intel_idle: MWAIT substates: 0x20220
[ 1.577291] intel_idle: v0.4 model 0x1C
[ 1.577296] intel_idle: lapic_timer_reliable_states 0x2
[ 1.577301] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.577497] ACPI: AC Adapter [AC0] (on-line)
[ 1.577741] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.582370] ACPI: Lid Switch [LID]
[ 1.582468] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.582479] ACPI: Sleep Button [SLPB]
[ 1.582572] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.582580] ACPI: Power Button [PWRB]
[ 1.582671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.582679] ACPI: Power Button [PWRF]
[ 1.582847] ACPI: Requesting acpi_cpufreq
[ 1.607984] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.607992] ACPI: Thermal Zone [TZ00] (65 C)
[ 1.608092] GHES: HEST is not enabled!
[ 1.608350] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.608473] isapnp: Scanning for PnP cards...
[ 1.612679] Linux agpgart interface v0.103
[ 1.612887] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.613039] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.613213] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.613449] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.617902] brd: module loaded
[ 1.620259] loop: module loaded
[ 1.620607] ata_piix 0000:00:1f.2: version 2.13
[ 1.620660] ata_piix 0000:00:1f.2: MAP [
[ 1.620665] P0 P2 P1 P3 ]
[ 1.700349] ACPI: Battery Slot [BAT0] (battery present)
[ 1.776058] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.776738] scsi0 : ata_piix
[ 1.778578] scsi1 : ata_piix
[ 1.779944] ata1: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 21
[ 1.779953] ata2: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 21
[ 1.780855] libphy: Fixed MDIO Bus: probed
[ 1.781084] tun: Universal TUN/TAP device driver, 1.6
[ 1.781090] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.781403] PPP generic driver version 2.4.2
[ 1.781519] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.781525] ehci-pci: EHCI PCI platform driver
[ 1.781598] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1.781608] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.781625] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.781652] ehci-pci 0000:00:1d.7: debug port 1
[ 1.785586] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.785643] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[ 1.796039] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.796091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.796100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.796108] usb usb1: Product: EHCI Host Controller
[ 1.796115] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[ 1.796122] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.796432] hub 1-0:1.0: USB hub found
[ 1.796446] hub 1-0:1.0: 8 ports detected
[ 1.797314] ehci-platform: EHCI generic platform driver
[ 1.797346] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.797395] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.797452] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.797462] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.797482] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.797524] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.797614] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.797622] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.797630] usb usb2: Product: UHCI Host Controller
[ 1.797637] usb usb2: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 1.797644] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.797942] hub 2-0:1.0: USB hub found
[ 1.797956] hub 2-0:1.0: 2 ports detected
[ 1.798248] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.798258] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.798274] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.798337] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.798420] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.798429] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.798436] usb usb3: Product: UHCI Host Controller
[ 1.798444] usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 1.798451] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.798723] hub 3-0:1.0: USB hub found
[ 1.798737] hub 3-0:1.0: 2 ports detected
[ 1.799021] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.799031] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.799046] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.799105] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.799192] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.799201] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.799209] usb usb4: Product: UHCI Host Controller
[ 1.799216] usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 1.799223] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.799497] hub 4-0:1.0: USB hub found
[ 1.799510] hub 4-0:1.0: 2 ports detected
[ 1.799798] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.799808] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.799828] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.799893] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.799976] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.799984] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.799992] usb usb5: Product: UHCI Host Controller
[ 1.800044] usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 1.800052] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.800360] hub 5-0:1.0: USB hub found
[ 1.800374] hub 5-0:1.0: 2 ports detected
[ 1.800847] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.818842] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.818864] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.819182] mousedev: PS/2 mouse device common for all mice
[ 1.820253] rtc_cmos 00:02: RTC can wake from S4
[ 1.820469] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.820513] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.820790] device-mapper: uevent: version 1.0.3
[ 1.820972] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.821031] EISA: Probing bus 0 at eisa.0
[ 1.821037] EISA: Cannot allocate resource for mainboard
[ 1.821043] Cannot allocate resource for EISA slot 1
[ 1.821048] Cannot allocate resource for EISA slot 2
[ 1.821053] Cannot allocate resource for EISA slot 3
[ 1.821058] Cannot allocate resource for EISA slot 4
[ 1.821063] Cannot allocate resource for EISA slot 5
[ 1.821068] Cannot allocate resource for EISA slot 6
[ 1.821073] Cannot allocate resource for EISA slot 7
[ 1.821078] Cannot allocate resource for EISA slot 8
[ 1.821083] EISA: Detected 0 cards.
[ 1.821102] cpufreq-nforce2: No nForce2 chipset.
[ 1.821227] cpuidle: using governor ladder
[ 1.821380] cpuidle: using governor menu
[ 1.821390] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.821395] EFI Variables Facility v0.08 2004-May-17
[ 1.821931] ashmem: initialized
[ 1.822255] TCP: cubic registered
[ 1.822566] NET: Registered protocol family 10
[ 1.823060] NET: Registered protocol family 17
[ 1.823091] Key type dns_resolver registered
[ 1.823518] Using IPI No-Shortcut mode
[ 1.823747] Loading module verification certificates
[ 1.837882] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fceb9fd088cf158e29d83343e1c98bf8ab23d94a'
[ 1.837922] registered taskstats version 1
[ 1.845055] Key type trusted registered
[ 1.848497] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.853043] Key type encrypted registered
[ 1.864070] rtc_cmos 00:02: setting system clock to 2013-09-12 10:29:45 UTC (1378981785)
[ 1.865252] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.865258] EDD information not available.
[ 1.952214] ata1.00: ATA-8: WDC WD3200BPVT-80ZEST0, 01.01A01, max UDMA/133
[ 1.952225] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.962441] isapnp: No Plug & Play device found
[ 1.969319] ata1.00: configured for UDMA/133
[ 1.969657] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-8 01.0 PQ: 0 ANSI: 5
[ 1.969987] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.969997] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.970083] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.970185] sd 0:0:0:0: [sda] Write Protect is off
[ 1.970196] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.970280] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.027385] sda: sda1 sda2 < sda5 >
[ 2.028282] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.028438] Freeing unused kernel memory: 784k freed
[ 2.028965] Write protecting the kernel text: 6252k
[ 2.029099] Write protecting the kernel read-only data: 2432k
[ 2.029104] NX-protecting the kernel data: 3988k
[ 2.065100] udevd[101]: starting version 175
[ 2.108089] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 2.245967] usb 1-3: New USB device found, idVendor=0b05, idProduct=1779
[ 2.245981] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.245990] usb 1-3: Product: AF9035A USB Device
[ 2.245999] usb 1-3: Manufacturer: Afa Technologies Inc.
[ 2.246007] usb 1-3: SerialNumber: CT701A024900378
[ 2.346794] [drm] Initialized drm 1.1.0 20060810
[ 2.360146] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 2.365632] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[ 2.397246] wmi: Mapper loaded
[ 2.436395] Disabling lock debugging due to kernel taint
[ 2.493566] usb 1-5: New USB device found, idVendor=058f, idProduct=6366
[ 2.493578] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.493587] usb 1-5: Product: Mass Storage Device
[ 2.493595] usb 1-5: Manufacturer: Generic
[ 2.493602] usb 1-5: SerialNumber: 058F63666433
[ 2.604069] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 2.628185] i915 0000:00:02.0: setting latency timer to 64
[ 2.628890] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.628922] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.628929] [drm] Driver supports precise vblank timestamp query.
[ 2.629016] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.783511] [drm] initialized overlay support
[ 2.822321] usb 1-6: New USB device found, idVendor=13d3, idProduct=5711
[ 2.822335] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.822345] usb 1-6: Product: USB 2.0 UVC VGA WebCam
[ 2.822355] usb 1-6: Manufacturer: Azurewave
[ 2.822364] usb 1-6: SerialNumber: 0x0001
[ 2.849234] Initializing USB Mass Storage driver...
[ 2.853963] scsi2 : usb-storage 1-5:1.0
[ 2.854205] usbcore: registered new interface driver usb-storage
[ 2.854212] USB Mass Storage support registered.
[ 2.893267] usbcore: registered new interface driver usbhid
[ 2.893276] usbhid: USB HID core driver
[ 2.911273] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input5
[ 2.911598] hid-generic 0003:0B05:1779.0001: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:1d.7-3/input1
[ 3.097083] fbcon: inteldrmfb (fb0) is primary device
[ 3.520103] Console: switching to colour frame buffer device 128x37
[ 3.527277] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.527283] i915 0000:00:02.0: registered panic notifier
[ 3.533481] ACPI Warning: _BQC returned an invalid level (20121018/video-494)
[ 3.538138] acpi device:2b: registered as cooling_device2
[ 3.538250] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.538397] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 3.539031] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.813390] xor: automatically using best checksumming function:
[ 3.852030] pIII_sse : 5039.000 MB/sec
[ 3.873659] device-mapper: dm-raid45: initialized v0.2594b
[ 3.980823] scsi 2:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 3.983161] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.026540] Btrfs loaded
[ 4.320990] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.644566] sd 2:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
[ 4.645635] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.645644] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4.646634] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.646641] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.651318] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.651331] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.652665] sdb: sdb1
[ 4.656168] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.656181] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.656193] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 19.123434] Adding 2086908k swap on /dev/sda5. Priority:-1 extents:1 across:2086908k
[ 19.243018] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.359686] udevd[435]: starting version 175
[ 19.454670] lp: driver loaded but no devices found
[ 19.776202] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 20.347556] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 20.470929] input: HDA Intel Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 20.520099] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 20.520122] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \_SB_.PCI0.SBRG.IELK.GPSE 2 (20121018/utaddress-251)
[ 20.520137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.520149] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20121018/utaddress-251)
[ 20.520163] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.520170] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20121018/utaddress-251)
[ 20.520184] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.520190] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 20.586977] cfg80211: Calling CRDA to update world regulatory domain
[ 20.663922] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[ 20.979531] device-mapper: multipath: version 1.5.1 loaded
[ 21.343700] Bluetooth: Core ver 2.16
[ 21.345453] NET: Registered protocol family 31
[ 21.345466] Bluetooth: HCI device and connection manager initialized
[ 21.345489] Bluetooth: HCI socket layer initialized
[ 21.345504] Bluetooth: L2CAP socket layer initialized
[ 21.345540] Bluetooth: SCO socket layer initialized
[ 21.364379] Linux video capture interface: v2.00
[ 21.409801] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.409811] Bluetooth: BNEP filters: protocol multicast
[ 21.409831] Bluetooth: BNEP socket layer initialized
[ 21.441595] Bluetooth: RFCOMM TTY layer initialized
[ 21.441630] Bluetooth: RFCOMM socket layer initialized
[ 21.441638] Bluetooth: RFCOMM ver 1.11
[ 21.551937] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x140200)
[ 21.610400] ppdev: user-space parallel port driver
[ 21.615728] psmouse serio1: elantech: Synaptics capabilities query result 0x48, 0x14, 0x0b.
[ 21.669509] ath: phy0: ASPM enabled: 0x42
[ 21.669521] ath: EEPROM regdomain: 0x60
[ 21.669526] ath: EEPROM indicates we should expect a direct regpair map
[ 21.669535] ath: Country alpha2 being used: 00
[ 21.669540] ath: Regpair used: 0x60
[ 21.772951] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[ 21.811545] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 21.813510] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8d80000, irq=17
[ 21.844450] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input8
[ 21.863836] init: avahi-cups-reload main process (750) terminated with status 1
[ 21.872646] usbcore: registered new interface driver uvcvideo
[ 21.872657] USB Video Class driver (1.1.1)
[ 21.933117] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 21.997131] usb 1-3: dvb_usb_v2: found a 'Asus U3100Mini Plus' in warm state
[ 21.998353] usbcore: registered new interface driver dvb_usb_af9035
[ 21.999389] usb 1-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 21.999469] DVB: registering new adapter (Asus U3100Mini Plus)
[ 22.072509] i2c i2c-6: af9033: firmware version: LINK=12.5.13.0 OFDM=6.8.13.0
[ 22.076524] usb 1-3: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 22.208264] usb 1-3: dvb_usb_v2: 'Asus U3100Mini Plus' error while loading driver (-19)
[ 22.209300] usb 1-3: dvb_usb_v2: 'Asus U3100Mini Plus' successfully deinitialized and disconnected
[ 22.413048] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[ 22.461599] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 22.414012] asus_wmi: ASUS WMI generic driver loaded
[ 22.476946] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.6
[ 22.477244] asus_wmi: SFUN value: 0x0<6>[ 22.555184] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[ 22.726247] asus_wmi: Backlight controlled by ACPI video driver
[ 22.743334] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 22.913074] cfg80211: World regulatory domain updated:
[ 22.913086] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.913094] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.913101] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.913109] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.913115] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.913123] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.036697] init: failsafe main process (844) killed by TERM signal
[ 23.164055] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 23.335184] init: smbd main process (865) killed by HUP signal
[ 23.335280] init: smbd main process ended, respawning
[ 23.802297] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
[ 25.770862] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.774349] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.795223] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 25.815388] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.841888] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.033456] wlan0: authenticate with a0:f3:c1:69:66:2e
[ 28.046410] wlan0: send auth to a0:f3:c1:69:66:2e (try 1/3)
[ 28.048811] wlan0: authenticated
[ 28.052059] wlan0: associate with a0:f3:c1:69:66:2e (try 1/3)
[ 28.056482] wlan0: RX AssocResp from a0:f3:c1:69:66:2e (capab=0x31 status=0 aid=4)
[ 28.056642] wlan0: associated
[ 28.056724] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.056867] cfg80211: Calling CRDA for country: CZ
[ 28.072059] ath: regdomain 0x80cb updated by CountryIE
[ 28.072069] ath: EEPROM regdomain: 0x80cb
[ 28.072074] ath: EEPROM indicates we should expect a country code
[ 28.072079] ath: doing EEPROM country->regdmn map search
[ 28.072085] ath: country maps to regdmn code: 0x36
[ 28.072091] ath: Country alpha2 being used: CZ
[ 28.072096] ath: Regpair used: 0x36
[ 28.072150] cfg80211: Regulatory domain changed to country: CZ
[ 28.072157] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 28.072164] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 28.072171] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[ 28.072178] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 28.072185] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 29.676504] init: plymouth-stop pre-start process (1519) terminated with status 1
[ 153.974618] systemd-timedated[2343]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
jan@jan-1001PXD ~ $
Kód: Vybrat vše
[ 1.580616] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.580691] io scheduler noop registered
[ 1.580699] io scheduler deadline registered (default)
[ 1.580718] io scheduler cfq registered
[ 1.581014] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.581178] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 1.581339] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 1.581502] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.581552] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.581697] intel_idle: MWAIT substates: 0x20220
[ 1.581715] intel_idle: v0.4 model 0x1C
[ 1.581720] intel_idle: lapic_timer_reliable_states 0x2
[ 1.581725] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.581924] ACPI: AC Adapter [AC0] (on-line)
[ 1.582090] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.586700] ACPI: Lid Switch [LID]
[ 1.586810] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.586821] ACPI: Sleep Button [SLPB]
[ 1.586912] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.586921] ACPI: Power Button [PWRB]
[ 1.587013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.587021] ACPI: Power Button [PWRF]
[ 1.587187] ACPI: Requesting acpi_cpufreq
[ 1.612145] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.612153] ACPI: Thermal Zone [TZ00] (65 C)
[ 1.612238] GHES: HEST is not enabled!
[ 1.612509] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.612622] isapnp: Scanning for PnP cards...
[ 1.616844] Linux agpgart interface v0.103
[ 1.617086] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.617212] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.617385] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.617616] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.622075] brd: module loaded
[ 1.624427] loop: module loaded
[ 1.624775] ata_piix 0000:00:1f.2: version 2.13
[ 1.624829] ata_piix 0000:00:1f.2: MAP [
[ 1.624835] P0 P2 P1 P3 ]
[ 1.705481] ACPI: Battery Slot [BAT0] (battery present)
[ 1.780058] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.780729] scsi0 : ata_piix
[ 1.782626] scsi1 : ata_piix
[ 1.783997] ata1: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 21
[ 1.784031] ata2: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 21
[ 1.784904] libphy: Fixed MDIO Bus: probed
[ 1.785135] tun: Universal TUN/TAP device driver, 1.6
[ 1.785141] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.785443] PPP generic driver version 2.4.2
[ 1.785577] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.785584] ehci-pci: EHCI PCI platform driver
[ 1.785657] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1.785667] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.785684] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.785710] ehci-pci 0000:00:1d.7: debug port 1
[ 1.789629] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.789686] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[ 1.800039] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.800092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.800101] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.800108] usb usb1: Product: EHCI Host Controller
[ 1.800116] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[ 1.800123] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.800432] hub 1-0:1.0: USB hub found
[ 1.800446] hub 1-0:1.0: 8 ports detected
[ 1.801311] ehci-platform: EHCI generic platform driver
[ 1.801343] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.801398] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.801454] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.801463] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.801480] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.801522] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.801613] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.801622] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.801629] usb usb2: Product: UHCI Host Controller
[ 1.801637] usb usb2: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 1.801644] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.801938] hub 2-0:1.0: USB hub found
[ 1.801952] hub 2-0:1.0: 2 ports detected
[ 1.802245] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.802255] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.802271] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.802335] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.802417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.802426] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.802433] usb usb3: Product: UHCI Host Controller
[ 1.802441] usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 1.802448] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.802721] hub 3-0:1.0: USB hub found
[ 1.802735] hub 3-0:1.0: 2 ports detected
[ 1.803020] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.803030] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.803045] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.803105] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.803186] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.803195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.803202] usb usb4: Product: UHCI Host Controller
[ 1.803210] usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 1.803217] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.803493] hub 4-0:1.0: USB hub found
[ 1.803507] hub 4-0:1.0: 2 ports detected
[ 1.803799] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.803809] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.803824] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.803883] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.803975] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.803984] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.803991] usb usb5: Product: UHCI Host Controller
[ 1.803999] usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 1.804046] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.804356] hub 5-0:1.0: USB hub found
[ 1.804370] hub 5-0:1.0: 2 ports detected
[ 1.804851] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.822529] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.822550] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.822863] mousedev: PS/2 mouse device common for all mice
[ 1.823945] rtc_cmos 00:02: RTC can wake from S4
[ 1.824173] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.824216] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.824497] device-mapper: uevent: version 1.0.3
[ 1.824683] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.824735] EISA: Probing bus 0 at eisa.0
[ 1.824742] EISA: Cannot allocate resource for mainboard
[ 1.824747] Cannot allocate resource for EISA slot 1
[ 1.824753] Cannot allocate resource for EISA slot 2
[ 1.824758] Cannot allocate resource for EISA slot 3
[ 1.824763] Cannot allocate resource for EISA slot 4
[ 1.824768] Cannot allocate resource for EISA slot 5
[ 1.824773] Cannot allocate resource for EISA slot 6
[ 1.824778] Cannot allocate resource for EISA slot 7
[ 1.824783] Cannot allocate resource for EISA slot 8
[ 1.824788] EISA: Detected 0 cards.
[ 1.824806] cpufreq-nforce2: No nForce2 chipset.
[ 1.824945] cpuidle: using governor ladder
[ 1.825096] cpuidle: using governor menu
[ 1.825106] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.825112] EFI Variables Facility v0.08 2004-May-17
[ 1.825647] ashmem: initialized
[ 1.825959] TCP: cubic registered
[ 1.826274] NET: Registered protocol family 10
[ 1.826764] NET: Registered protocol family 17
[ 1.826804] Key type dns_resolver registered
[ 1.827232] Using IPI No-Shortcut mode
[ 1.827456] Loading module verification certificates
[ 1.841596] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fceb9fd088cf158e29d83343e1c98bf8ab23d94a'
[ 1.841637] registered taskstats version 1
[ 1.848759] Key type trusted registered
[ 1.852265] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.856682] Key type encrypted registered
[ 1.867708] rtc_cmos 00:02: setting system clock to 2013-09-12 11:08:07 UTC (1378984087)
[ 1.868925] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.868932] EDD information not available.
[ 1.955458] ata1.00: ATA-8: WDC WD3200BPVT-80ZEST0, 01.01A01, max UDMA/133
[ 1.955470] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.966596] isapnp: No Plug & Play device found
[ 1.968570] ata1.00: configured for UDMA/133
[ 1.968908] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-8 01.0 PQ: 0 ANSI: 5
[ 1.969265] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.969276] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.969360] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.969460] sd 0:0:0:0: [sda] Write Protect is off
[ 1.969472] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.969571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.037141] sda: sda1 sda2 < sda5 >
[ 2.037992] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.038147] Freeing unused kernel memory: 784k freed
[ 2.038676] Write protecting the kernel text: 6252k
[ 2.038809] Write protecting the kernel read-only data: 2432k
[ 2.038815] NX-protecting the kernel data: 3988k
[ 2.074807] udevd[101]: starting version 175
[ 2.112090] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.250645] usb 1-1: New USB device found, idVendor=0b05, idProduct=1779
[ 2.250659] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.250669] usb 1-1: Product: AF9035A USB Device
[ 2.250677] usb 1-1: Manufacturer: Afa Technologies Inc.
[ 2.250685] usb 1-1: SerialNumber: CT701A024900378
[ 2.356981] Disabling lock debugging due to kernel taint
[ 2.364068] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 2.406098] [drm] Initialized drm 1.1.0 20060810
[ 2.497493] usb 1-5: New USB device found, idVendor=058f, idProduct=6366
[ 2.497506] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.497514] usb 1-5: Product: Mass Storage Device
[ 2.497522] usb 1-5: Manufacturer: Generic
[ 2.497529] usb 1-5: SerialNumber: 058F63666433
[ 2.569853] wmi: Mapper loaded
[ 2.604635] i915 0000:00:02.0: setting latency timer to 64
[ 2.605259] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.605283] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.605288] [drm] Driver supports precise vblank timestamp query.
[ 2.605374] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.625620] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[ 2.668116] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 2.759588] [drm] initialized overlay support
[ 2.886488] usb 1-6: New USB device found, idVendor=13d3, idProduct=5711
[ 2.886502] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.886513] usb 1-6: Product: USB 2.0 UVC VGA WebCam
[ 2.886522] usb 1-6: Manufacturer: Azurewave
[ 2.886531] usb 1-6: SerialNumber: 0x0001
[ 2.919265] Initializing USB Mass Storage driver...
[ 2.919649] scsi2 : usb-storage 1-5:1.0
[ 2.919903] usbcore: registered new interface driver usb-storage
[ 2.919909] USB Mass Storage support registered.
[ 2.956449] usbcore: registered new interface driver usbhid
[ 2.956458] usbhid: USB HID core driver
[ 2.975169] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.1/input/input5
[ 2.975544] hid-generic 0003:0B05:1779.0001: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:1d.7-1/input1
[ 3.069054] fbcon: inteldrmfb (fb0) is primary device
[ 3.452111] Console: switching to colour frame buffer device 128x37
[ 3.459282] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.459288] i915 0000:00:02.0: registered panic notifier
[ 3.465480] ACPI Warning: _BQC returned an invalid level (20121018/video-494)
[ 3.470179] acpi device:2b: registered as cooling_device2
[ 3.470288] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.470438] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 3.470670] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.748587] xor: automatically using best checksumming function:
[ 3.788029] pIII_sse : 5079.000 MB/sec
[ 3.809110] device-mapper: dm-raid45: initialized v0.2594b
[ 3.958707] Btrfs loaded
[ 4.044865] scsi 2:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 4.046652] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.252690] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.708622] sd 2:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
[ 4.709676] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.709685] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4.710675] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.710682] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.714444] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.714454] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.715564] sdb: sdb1
[ 4.718810] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.718820] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.718828] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 19.044354] Adding 2086908k swap on /dev/sda5. Priority:-1 extents:1 across:2086908k
[ 19.161312] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.280724] udevd[434]: starting version 175
[ 19.437413] lp: driver loaded but no devices found
[ 19.658445] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 20.235590] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 20.235612] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \_SB_.PCI0.SBRG.IELK.GPSE 2 (20121018/utaddress-251)
[ 20.235626] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.235637] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20121018/utaddress-251)
[ 20.235651] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.235659] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20121018/utaddress-251)
[ 20.235674] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.235680] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 20.276136] cfg80211: Calling CRDA to update world regulatory domain
[ 20.762523] ath: phy0: ASPM enabled: 0x42
[ 20.762536] ath: EEPROM regdomain: 0x60
[ 20.762542] ath: EEPROM indicates we should expect a direct regpair map
[ 20.762550] ath: Country alpha2 being used: 00
[ 20.762555] ath: Regpair used: 0x60
[ 20.850288] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 20.852120] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf87e0000, irq=17
[ 20.972690] Bluetooth: Core ver 2.16
[ 20.972903] NET: Registered protocol family 31
[ 20.972912] Bluetooth: HCI device and connection manager initialized
[ 20.972934] Bluetooth: HCI socket layer initialized
[ 20.972947] Bluetooth: L2CAP socket layer initialized
[ 20.972972] Bluetooth: SCO socket layer initialized
[ 21.074288] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.074299] Bluetooth: BNEP filters: protocol multicast
[ 21.074320] Bluetooth: BNEP socket layer initialized
[ 21.079462] Bluetooth: RFCOMM TTY layer initialized
[ 21.079494] Bluetooth: RFCOMM socket layer initialized
[ 21.079501] Bluetooth: RFCOMM ver 1.11
[ 21.102227] Linux video capture interface: v2.00
[ 21.143530] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 21.283881] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[ 21.310595] ppdev: user-space parallel port driver
[ 21.327102] input: HDA Intel Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 21.339385] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[ 21.363373] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input8
[ 21.363760] usbcore: registered new interface driver uvcvideo
[ 21.363767] USB Video Class driver (1.1.1)
[ 21.460096] init: avahi-cups-reload main process (687) terminated with status 1
[ 21.783934] device-mapper: multipath: version 1.5.1 loaded
[ 22.000181] usb 1-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state
[ 22.017001] usbcore: registered new interface driver dvb_usb_af9035
[ 22.033567] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x140200)
[ 22.064977] usb 1-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[ 22.096461] psmouse serio1: elantech: Synaptics capabilities query result 0x48, 0x14, 0x0b.
[ 22.408481] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 22.441347] usb 1-1: dvb_usb_af9035: firmware version=11.5.9.0
[ 22.441385] usb 1-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in warm state
[ 22.443409] usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 22.443675] DVB: registering new adapter (Asus U3100Mini Plus)
[ 22.750785] init: failsafe main process (816) killed by TERM signal
[ 22.759896] i2c i2c-6: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[ 22.763927] usb 1-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 22.778334] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[ 22.730450] asus_wmi: ASUS WMI generic driver loaded
[ 22.880393] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.6
[ 22.880704] asus_wmi: SFUN value: 0x0<6>[ 22.900411] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[ 22.908265] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 22.927075] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 23.055971] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' error while loading driver (-19)
[ 23.060239] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' successfully deinitialized and disconnected
[ 23.062318] asus_wmi: Backlight controlled by ACPI video driver
[ 23.075332] cfg80211: World regulatory domain updated:
[ 23.075343] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.075352] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.075360] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.075367] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.075374] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.075382] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.268910] init: smbd main process (845) killed by HUP signal
[ 23.268990] init: smbd main process ended, respawning
[ 23.628074] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 24.270856] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
[ 25.566261] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.571989] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.591420] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 25.610581] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.637014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.825439] wlan0: authenticate with a0:f3:c1:69:66:2e
[ 27.837794] wlan0: send auth to a0:f3:c1:69:66:2e (try 1/3)
[ 27.840210] wlan0: authenticated
[ 27.848061] wlan0: associate with a0:f3:c1:69:66:2e (try 1/3)
[ 27.852313] wlan0: RX AssocResp from a0:f3:c1:69:66:2e (capab=0x31 status=0 aid=4)
[ 27.852469] wlan0: associated
[ 27.852562] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.852713] cfg80211: Calling CRDA for country: CZ
[ 27.871754] ath: regdomain 0x80cb updated by CountryIE
[ 27.871765] ath: EEPROM regdomain: 0x80cb
[ 27.871770] ath: EEPROM indicates we should expect a country code
[ 27.871775] ath: doing EEPROM country->regdmn map search
[ 27.871781] ath: country maps to regdmn code: 0x36
[ 27.871787] ath: Country alpha2 being used: CZ
[ 27.871792] ath: Regpair used: 0x36
[ 27.871846] cfg80211: Regulatory domain changed to country: CZ
[ 27.871852] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.871860] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 27.871867] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[ 27.871874] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 27.871881] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 29.634879] init: plymouth-stop pre-start process (1516) terminated with status 1
[ 136.319289] usb 1-1: USB disconnect, device number 2
[ 263.728134] usb 1-1: new high-speed USB device number 5 using ehci-pci
[ 263.866608] usb 1-1: New USB device found, idVendor=0b05, idProduct=1779
[ 263.866624] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 263.866635] usb 1-1: Product: AF9035A USB Device
[ 263.866645] usb 1-1: Manufacturer: Afa Technologies Inc.
[ 263.866654] usb 1-1: SerialNumber: CT701A024900378
[ 263.873689] usb 1-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state
[ 263.873923] usb 1-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[ 263.874609] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.1/input/input11
[ 263.875274] hid-generic 0003:0B05:1779.0002: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:1d.7-1/input1
[ 264.205224] usb 1-1: dvb_usb_af9035: firmware version=11.5.9.0
[ 264.205271] usb 1-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in warm state
[ 264.207388] usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 264.207817] DVB: registering new adapter (Asus U3100Mini Plus)
[ 264.220604] i2c i2c-6: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[ 264.225273] usb 1-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 264.263458] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' error while loading driver (-19)
[ 264.264272] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' successfully deinitialized and disconnected
[ 430.606137] usb 1-1: USB disconnect, device number 5
[ 565.904214] usb 1-1: new high-speed USB device number 6 using ehci-pci
[ 566.042838] usb 1-1: New USB device found, idVendor=0b05, idProduct=1779
[ 566.042855] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 566.042867] usb 1-1: Product: AF9035A USB Device
[ 566.042876] usb 1-1: Manufacturer: Afa Technologies Inc.
[ 566.042885] usb 1-1: SerialNumber: CT701A024900378
[ 566.048788] usb 1-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state
[ 566.048956] usb 1-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[ 566.049507] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.1/input/input12
[ 566.050081] hid-generic 0003:0B05:1779.0003: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:1d.7-1/input1
[ 566.372668] usb 1-1: dvb_usb_af9035: firmware version=11.5.9.0
[ 566.372722] usb 1-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in warm state
[ 566.374804] usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 566.375054] DVB: registering new adapter (Asus U3100Mini Plus)
[ 566.382030] i2c i2c-6: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[ 566.385944] usb 1-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 566.435902] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' error while loading driver (-19)
[ 566.436748] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' successfully deinitialized and disconnected
[ 780.662426] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 780.662531] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 958.967630] systemd-timedated[3033]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
[ 1109.481342] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1124.359145] usb 1-5: USB disconnect, device number 3
[ 1188.868087] usb 1-5: new high-speed USB device number 7 using ehci-pci
[ 1189.001814] usb 1-5: New USB device found, idVendor=058f, idProduct=6366
[ 1189.001830] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1189.001841] usb 1-5: Product: Mass Storage Device
[ 1189.001850] usb 1-5: Manufacturer: Generic
[ 1189.001859] usb 1-5: SerialNumber: 058F63666433
[ 1189.002955] scsi3 : usb-storage 1-5:1.0
[ 1190.129122] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 1190.132679] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1190.794931] sd 3:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
[ 1190.796211] sd 3:0:0:0: [sdb] Write Protect is off
[ 1190.796229] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 1190.797531] sd 3:0:0:0: [sdb] No Caching mode page present
[ 1190.797546] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1190.804536] sd 3:0:0:0: [sdb] No Caching mode page present
[ 1190.804553] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1190.805913] sdb: sdb1
[ 1190.817465] sd 3:0:0:0: [sdb] No Caching mode page present
[ 1190.817487] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1190.817507] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1241.411264] usb 1-1: USB disconnect, device number 6
[ 1244.016112] usb 1-1: new high-speed USB device number 8 using ehci-pci
[ 1244.154619] usb 1-1: New USB device found, idVendor=0b05, idProduct=1779
[ 1244.154635] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1244.154646] usb 1-1: Product: AF9035A USB Device
[ 1244.154656] usb 1-1: Manufacturer: Afa Technologies Inc.
[ 1244.154665] usb 1-1: SerialNumber: CT701A024900378
[ 1244.158359] usb 1-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state
[ 1244.158541] usb 1-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[ 1244.162497] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.1/input/input13
[ 1244.163058] hid-generic 0003:0B05:1779.0004: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:1d.7-1/input1
[ 1244.490101] usb 1-1: dvb_usb_af9035: firmware version=11.5.9.0
[ 1244.490153] usb 1-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in warm state
[ 1244.492458] usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 1244.492559] DVB: registering new adapter (Asus U3100Mini Plus)
[ 1244.507486] i2c i2c-6: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[ 1244.511371] usb 1-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 1244.548405] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' error while loading driver (-19)
[ 1244.549124] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' successfully deinitialized and disconnected
jan@jan-1001PXD ~ $
Kód: Vybrat vše
http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-TKód: Vybrat vše
[ 1244.548405] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' error while loading driver (-19)
[ 1244.549124] usb 1-1: dvb_usb_v2: 'Asus U3100Mini Plus' successfully deinitialized and disconnectedKód: Vybrat vše
http://linuxos.sk/clanok/evolve-venus-a-ubuntu-1004/