LM 19.2 nejde zvuk Audigy 2

Problémy a zkušenosti s hardwarem, perifériemi a ovladači
Zpráva
Autor
Uživatelský avatar
redhawk
Guru Mintu
Příspěvky: 3032
Registrován: 12 led 2016, 19:14
Bydliště: ako kedy

Re: LM 19.2 nejde zvuk Audigy 2

#21 Příspěvek od redhawk » 09 srp 2019, 16:57

labeent píše:
09 srp 2019, 16:34
Je to prostě nějaké zakleté:

Kód: Vybrat vše

Terminal:~$ sudo modprobe -r snd_util_mem  snd_emu10k1
[sudo] heslo pro ****:       
modprobe: FATAL: Module snd_util_mem is in use.
Terminal:~$ sudo modprobe -r snd_ac97_codec snd_emu10k1
modprobe: FATAL: Module snd_ac97_codec is in use.
Terminal:~$ sudo modprobe -r snd_hwdep   snd_emu10k1
modprobe: FATAL: Module snd_hwdep is in use.
Terminal:~$ sudo modprobe -r snd_pcm snd_emu10k1
modprobe: FATAL: Module snd_pcm is in use.
Terminal:~$ sudo modprobe -r snd_rawmidi snd_emu10k1
modprobe: FATAL: Module snd_rawmidi is in use.
Terminal:~$ sudo modprobe -r snd_seq_device snd_emu10k1
modprobe: FATAL: Module snd_seq_device is in use.
Terminal:~$ sudo modprobe -r snd_timer  snd_emu10k1
modprobe: FATAL: Module snd_timer is in use.
Terminal:~$ sudo modprobe -r snd  snd_emu10k1
modprobe: FATAL: Module snd is in use.
Terminal:~$ sudo modprobe snd_emu10k1
Terminal:~$ sudo service alsa-utils start
Failed to start alsa-utils.service: Unit alsa-utils.service is masked.
Terminal:~$ pulseaudio -D
E: [pulseaudio] main.c: Spuštění démona selhalo.
Terminal:~$ 
to je divne. v live to ide?
inak presne pre taketo "drobnosti" som usiel z LM so systemd.


Este ma napadlo ci naozaj su repro cez spdif (opticky vystup)
a pavucontrol ma aky audio server nastaveny ako default (nie alsa) prave tlacitko na zvuk a option / nastavenia a tam je default server.
Pravděpodobně kecám.
Hlúposť užívateľa je úmerná jeho právam.
Podstatou pirátstva nie je túžba ľudí kradnúť, ale neschopnosť predať im veci, ktoré chcú.

menom
Guru Mintu
Příspěvky: 1606
Registrován: 12 pro 2012, 15:10

Re: LM 19.2 nejde zvuk Audigy 2

#22 Příspěvek od menom » 09 srp 2019, 17:00

.

Ahoj, tie prikazy na uvolnenie modulov z jadra by si mohol skusit takto:

Kód: Vybrat vše

sudo su

Kód: Vybrat vše

modprobe -r snd_util_mem

Kód: Vybrat vše

modprobe -r snd_ac97_codec

Kód: Vybrat vše

modprobe -r snd_hwdep

Kód: Vybrat vše

modprobe -r snd_pcm

Kód: Vybrat vše

modprobe -r snd_rawmidi

Kód: Vybrat vše

modprobe -r snd_seq_device

Kód: Vybrat vše

modprobe -r snd_timer

Kód: Vybrat vše

modprobe -r snd

Kód: Vybrat vše

modprobe -r snd_emu10k1_synth

Kód: Vybrat vše

modprobe -r snd_emu10k1
Opetovne zavedenie modulu:

Kód: Vybrat vše

modprobe snd_emu10k1

Kód: Vybrat vše

exit
Spustit alsu a PA pod userom:

Kód: Vybrat vše

sudo service alsa-utils start

Kód: Vybrat vše

pulseaudio -D
.

Uživatelský avatar
labeent
Příspěvky: 74
Registrován: 14 lis 2012, 22:57

Re: LM 19.2 nejde zvuk Audigy 2

#23 Příspěvek od labeent » 10 srp 2019, 04:02

menom píše:
09 srp 2019, 17:00
.

Ahoj, tie prikazy na uvolnenie modulov z jadra by si mohol skusit takto:

Kód: Vybrat vše

sudo su

Kód: Vybrat vše

modprobe -r snd_util_mem

Kód: Vybrat vše

modprobe -r snd_ac97_codec

Kód: Vybrat vše

modprobe -r snd_hwdep

Kód: Vybrat vše

modprobe -r snd_pcm

Kód: Vybrat vše

modprobe -r snd_rawmidi

Kód: Vybrat vše

modprobe -r snd_seq_device

Kód: Vybrat vše

modprobe -r snd_timer

Kód: Vybrat vše

modprobe -r snd

Kód: Vybrat vše

modprobe -r snd_emu10k1_synth

Kód: Vybrat vše

modprobe -r snd_emu10k1
Opetovne zavedenie modulu:

Kód: Vybrat vše

modprobe snd_emu10k1

Kód: Vybrat vše

exit
Spustit alsu a PA pod userom:

Kód: Vybrat vše

sudo service alsa-utils start

Kód: Vybrat vše

pulseaudio -D
.
To píše to samé ... Fatal...
Obrázek

Uživatelský avatar
labeent
Příspěvky: 74
Registrován: 14 lis 2012, 22:57

Re: LM 19.2 nejde zvuk Audigy 2

#24 Příspěvek od labeent » 10 srp 2019, 04:08

redhawk píše:
09 srp 2019, 16:57
labeent píše:
09 srp 2019, 16:34
Je to prostě nějaké zakleté:

Kód: Vybrat vše

Terminal:~$ sudo modprobe -r snd_util_mem  snd_emu10k1
[sudo] heslo pro ****:       
modprobe: FATAL: Module snd_util_mem is in use.
Terminal:~$ sudo modprobe -r snd_ac97_codec snd_emu10k1
modprobe: FATAL: Module snd_ac97_codec is in use.
Terminal:~$ sudo modprobe -r snd_hwdep   snd_emu10k1
modprobe: FATAL: Module snd_hwdep is in use.
Terminal:~$ sudo modprobe -r snd_pcm snd_emu10k1
modprobe: FATAL: Module snd_pcm is in use.
Terminal:~$ sudo modprobe -r snd_rawmidi snd_emu10k1
modprobe: FATAL: Module snd_rawmidi is in use.
Terminal:~$ sudo modprobe -r snd_seq_device snd_emu10k1
modprobe: FATAL: Module snd_seq_device is in use.
Terminal:~$ sudo modprobe -r snd_timer  snd_emu10k1
modprobe: FATAL: Module snd_timer is in use.
Terminal:~$ sudo modprobe -r snd  snd_emu10k1
modprobe: FATAL: Module snd is in use.
Terminal:~$ sudo modprobe snd_emu10k1
Terminal:~$ sudo service alsa-utils start
Failed to start alsa-utils.service: Unit alsa-utils.service is masked.
Terminal:~$ pulseaudio -D
E: [pulseaudio] main.c: Spuštění démona selhalo.
Terminal:~$ 
to je divne. v live to ide?
inak presne pre taketo "drobnosti" som usiel z LM so systemd.


Este ma napadlo ci naozaj su repro cez spdif (opticky vystup)
a pavucontrol ma aky audio server nastaveny ako default (nie alsa) prave tlacitko na zvuk a option / nastavenia a tam je default server.
Live zkusím, repro jsou přes SPDIF - digitální koaxiál. Na LM 19.1 i na LM 19.2 Beta mi to normálně fungovalo. Nic jsem s nastavením zvuku nedělal. Pak proběhlo několik aktualizací a je to v háji. Tak jsem Betu přeinstaloval na "ostrou" verzi a na ní to od spuštění nejde rovnou. Nepomohlo ani nové jádro, co mi Mint nabídnul (5.0.0-23-generic).
Možná to může už zlobit kvůli těm pokusům, co se s tím dělaly, můžu to případně přeinstalovat znovu ...
Obrázek

menom
Guru Mintu
Příspěvky: 1606
Registrován: 12 pro 2012, 15:10

Re: LM 19.2 nejde zvuk Audigy 2

#25 Příspěvek od menom » 10 srp 2019, 04:20

.

Ak to preinstalujes na system kde to funguje, tak by si mohol za rovnakych podmienok
urobit este teraz v nefunkcnom ten podrobny vypis:

Kód: Vybrat vše

pacmd list cards
Odlozit jako textak.

Potom po instalaci systemu to iste a porovnat v com su ine

.

Uživatelský avatar
labeent
Příspěvky: 74
Registrován: 14 lis 2012, 22:57

Re: LM 19.2 nejde zvuk Audigy 2

#26 Příspěvek od labeent » 10 srp 2019, 04:31

menom píše:
10 srp 2019, 04:20
.

Ak to preinstalujes na system kde to funguje, tak by si mohol za rovnakych podmienok
urobit este teraz v nefunkcnom ten podrobny vypis:

Kód: Vybrat vše

pacmd list cards
Odlozit jako textak.

Potom po instalaci systemu to iste a porovnat v com su ine

.

Kód: Vybrat vše

Terminal:~$ pacmd list cards
Memory blocks currently allocated: 1, size: 63,9 KiB.
Memory blocks allocated during the whole lifetime: 124275, size: 324,6 MiB.
Memory blocks imported from other processes: 0, size: 0 B.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_05_01.0.iec958-stereo
Default source name: alsa_input.pci-0000_05_01.0.analog-mono
Memory blocks of type POOL: 1 allocated/60967 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/0 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/48319 accumulated.
Memory blocks of type IMPORTED: 0 allocated/14989 accumulated.
26 module(s) loaded.
    index: 0
	name: <module-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "11.1"
    index: 1
	name: <module-stream-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "11.1"
    index: 2
	name: <module-card-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "11.1"
    index: 3
	name: <module-augment-properties>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "11.1"
    index: 4
	name: <module-switch-on-port-available>
	argument: <>
	used: -1
	load once: no
	properties:
		
    index: 5
	name: <module-switch-on-connect>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Michael Terry"
		module.description = "When a sink/source is added, switch to it or conditionally switch to it"
		module.version = "11.1"
    index: 6
	name: <module-udev-detect>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "11.1"
    index: 7
	name: <module-alsa-card>
	argument: <device_id="0" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 0
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "11.1"
    index: 8
	name: <module-alsa-card>
	argument: <device_id="1" name="pci-0000_05_01.0" card_name="alsa_card.pci-0000_05_01.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 0
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "11.1"
    index: 9
	name: <module-bluetooth-policy>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Frédéric Dalleau, Pali Rohár"
		module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
		module.version = "11.1"
    index: 10
	name: <module-bluetooth-discover>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "João Paulo Rechi Vita"
		module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
		module.version = "11.1"
    index: 11
	name: <module-bluez5-discover>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "João Paulo Rechi Vita"
		module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
		module.version = "11.1"
    index: 12
	name: <module-native-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "11.1"
    index: 13
	name: <module-gconf>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "GConf Adapter"
		module.version = "11.1"
    index: 14
	name: <module-default-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "11.1"
    index: 15
	name: <module-rescue-streams>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
		module.version = "11.1"
    index: 16
	name: <module-always-sink>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Udržuje nahraný vždy alespoň jeden cíl, i když se jedná o \"null\""
		module.version = "11.1"
    index: 17
	name: <module-intended-roles>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based on intended roles of devices"
		module.version = "11.1"
    index: 18
	name: <module-suspend-on-idle>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "11.1"
    index: 19
	name: <module-console-kit>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each ConsoleKit session of this user"
		module.version = "11.1"
    index: 20
	name: <module-systemd-login>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "11.1"
    index: 21
	name: <module-position-event-sounds>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "11.1"
    index: 22
	name: <module-role-cork>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Mute & cork streams with certain roles while others exist"
		module.version = "11.1"
    index: 23
	name: <module-filter-heuristics>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "11.1"
    index: 24
	name: <module-filter-apply>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "11.1"
    index: 25
	name: <module-cli-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Command line interface protocol (UNIX sockets)"
		module.version = "11.1"
2 sink(s) available.
    index: 0
	name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: yes
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
	card: 0 <alsa_card.pci-0000_01_00.1>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 0"
		alsa.id = "HDMI 0"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xfe8fc000 irq 26"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "aa58"
		device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
		device.string = "hdmi:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo"
		device.profile.description = "Digital Stereo (HDMI)"
		device.description = "Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.components = "HDA:1002aa01,00aa0100,00100200"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
	active port: <hdmi-output-0>
  * index: 1
	name: <alsa_output.pci-0000_05_01.0.iec958-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9038
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 341,33 ms
	card: 1 <alsa_card.pci-0000_05_01.0>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ADC Capture/Standard PCM Playback"
		alsa.id = "emu10k1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "SB Audigy 2 ZS [SB0350]"
		alsa.long_card_name = "SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xe880, irq 17"
		alsa.driver_name = "snd_emu10k1"
		device.bus_path = "pci-0000:05:01.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0004"
		device.product.name = "EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS)"
		device.string = "iec958:1"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "65536"
		device.access_mode = "mmap+timer"
		device.profile.name = "iec958-stereo"
		device.profile.description = "Digitální stereo (IEC958)"
		device.description = "EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS) Digitální stereo (IEC958)"
		alsa.mixer_name = "SigmaTel STAC9750,51"
		alsa.components = "AC97a:83847650"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		iec958-stereo-output: Digitální výstup (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <iec958-stereo-output>
3 source(s) available.
    index: 0
	name: <alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
	monitor_of: 0
	card: 0 <alsa_card.pci-0000_01_00.1>
	module: 7
	properties:
		device.description = "Monitor of Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xfe8fc000 irq 26"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "aa58"
		device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 1
	name: <alsa_output.pci-0000_05_01.0.iec958-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 341,33 ms
	monitor_of: 1
	card: 1 <alsa_card.pci-0000_05_01.0>
	module: 8
	properties:
		device.description = "Monitor of EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS) Digitální stereo (IEC958)"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "SB Audigy 2 ZS [SB0350]"
		alsa.long_card_name = "SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xe880, irq 17"
		alsa.driver_name = "snd_emu10k1"
		device.bus_path = "pci-0000:05:01.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0004"
		device.product.name = "EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS)"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
  * index: 2
	name: <alsa_input.pci-0000_05_01.0.analog-mono>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9039
	volume: mono: 47185 /  72% / -8,56 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 1ch 44100Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 743,04 ms
	card: 1 <alsa_card.pci-0000_05_01.0>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ADC Capture/Standard PCM Playback"
		alsa.id = "emu10k1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "SB Audigy 2 ZS [SB0350]"
		alsa.long_card_name = "SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xe880, irq 17"
		alsa.driver_name = "snd_emu10k1"
		device.bus_path = "pci-0000:05:01.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0004"
		device.product.name = "EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS)"
		device.string = "hw:1"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-mono"
		device.profile.description = "Analogové mono"
		device.description = "EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS) Analogové mono"
		alsa.mixer_name = "SigmaTel STAC9750,51"
		alsa.components = "AC97a:83847650"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-input-mic: Mikrofon (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-mic>
6 client(s) logged in.
    index: 0
	driver: <module-systemd-login.c>
	owner module: 20
	properties:
		application.name = "Login Session c2"
		systemd-login.session = "c2"
    index: 1
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "libcanberra"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.version = "0.30"
		application.id = "org.freedesktop.libcanberra"
		application.process.id = "1498"
		application.process.user = "labe"
		application.process.host = "labe-Asus-desktop"
		application.process.binary = "csd-sound"
		application.language = "cs_CZ.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "f3d85c83fd6e458aba76dbf56f683032"
		application.process.session_id = "c2"
    index: 2
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "Cinnamon Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "4.2.0"
		application.process.id = "1652"
		application.process.user = "labe"
		application.process.host = "labe-Asus-desktop"
		application.process.binary = "cinnamon"
		application.language = "cs_CZ.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "f3d85c83fd6e458aba76dbf56f683032"
		application.process.session_id = "c2"
    index: 3
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "Cinnamon Volume Control Media Keys"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "4.2.0"
		application.process.id = "1497"
		application.process.user = "labe"
		application.process.host = "labe-Asus-desktop"
		application.process.binary = "csd-media-keys"
		application.language = "cs_CZ.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "f3d85c83fd6e458aba76dbf56f683032"
		application.process.session_id = "c2"
    index: 8
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "Pale Moon"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "20528"
		application.process.user = "labe"
		application.process.host = "labe-Asus-desktop"
		application.process.binary = "palemoon"
		window.x11.display = ":0"
		application.language = "cs_CZ.UTF-8"
		application.process.machine_id = "f3d85c83fd6e458aba76dbf56f683032"
		application.process.session_id = "c2"
		application.icon_name = "palemoon"
    index: 14
	driver: <cli.c>
	owner module: 25
	properties:
		application.name = "UNIX socket client"
2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_01_00.1>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xfe8fc000 irq 26"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "aa58"
		device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
		device.string = "0"
		device.description = "Juniper HDMI Audio [Radeon HD 5700 Series]"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) výstup (priority 5400, available: no)
		off: Vypnuto (priority 0, available: unknown)
	active profile: <output:hdmi-stereo>
	sinks:
		alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)
	sources:
		alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#0: Monitor of Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_05_01.0>
	driver: <module-alsa-card.c>
	owner module: 8
	properties:
		alsa.card = "1"
		alsa.card_name = "SB Audigy 2 ZS [SB0350]"
		alsa.long_card_name = "SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xe880, irq 17"
		alsa.driver_name = "snd_emu10k1"
		device.bus_path = "pci-0000:05:01.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0004"
		device.product.name = "EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS)"
		device.string = "1"
		device.description = "EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-mono: Analogové mono vstup (priority 2, available: unknown)
		input:analog-stereo: Analogové stereo vstup (priority 60, available: unknown)
		input:iec958-stereo: Digitální stereo (IEC958) vstup (priority 55, available: unknown)
		output:analog-mono: Analogové mono výstup (priority 200, available: unknown)
		output:analog-mono+input:analog-mono: Analogové duplexní mono (priority 202, available: unknown)
		output:analog-mono+input:analog-stereo: Analogové mono výstup + Analogové stereo vstup (priority 260, available: unknown)
		output:analog-mono+input:iec958-stereo: Analogové mono výstup + Digitální stereo (IEC958) vstup (priority 255, available: unknown)
		output:analog-stereo: Analogové stereo výstup (priority 6000, available: unknown)
		output:analog-stereo+input:analog-mono: Analogové stereo výstup + Analogové mono vstup (priority 6002, available: unknown)
		output:analog-surround-21: Analogový Surround 2.1 výstup (priority 800, available: unknown)
		output:analog-surround-21+input:analog-mono: Analogový Surround 2.1 výstup + Analogové mono vstup (priority 802, available: unknown)
		output:analog-surround-40: Analogový Surround 4.0 výstup (priority 700, available: unknown)
		output:analog-surround-40+input:analog-mono: Analogový Surround 4.0 výstup + Analogové mono vstup (priority 702, available: unknown)
		output:analog-surround-41: Analogový Surround 4.1 výstup (priority 800, available: unknown)
		output:analog-surround-41+input:analog-mono: Analogový Surround 4.1 výstup + Analogové mono vstup (priority 802, available: unknown)
		output:analog-surround-50: Analogový Surround 5.0 výstup (priority 700, available: unknown)
		output:analog-surround-50+input:analog-mono: Analogový Surround 5.0 výstup + Analogové mono vstup (priority 702, available: unknown)
		output:analog-surround-51: Analogový Surround 5.1 výstup (priority 800, available: unknown)
		output:analog-surround-51+input:analog-mono: Analogový Surround 5.1 výstup + Analogové mono vstup (priority 802, available: unknown)
		output:analog-surround-71: Analog Surround 7.1 výstup (priority 700, available: unknown)
		output:analog-surround-71+input:analog-mono: Analog Surround 7.1 výstup + Analogové mono vstup (priority 702, available: unknown)
		output:iec958-stereo: Digitální stereo (IEC958) výstup (priority 5500, available: unknown)
		output:iec958-stereo+input:analog-mono: Digitální stereo (IEC958) výstup + Analogové mono vstup (priority 5502, available: unknown)
		off: Vypnuto (priority 0, available: unknown)
	active profile: <output:iec958-stereo+input:analog-mono>
	sinks:
		alsa_output.pci-0000_05_01.0.iec958-stereo/#1: EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS) Digitální stereo (IEC958)
	sources:
		alsa_output.pci-0000_05_01.0.iec958-stereo.monitor/#1: Monitor of EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS) Digitální stereo (IEC958)
		alsa_input.pci-0000_05_01.0.analog-mono/#2: EMU10k2/CA0100/CA0102/CA10200 [Sound Blaster Audigy Series] (SB0350 Audigy 2 ZS) Analogové mono
	ports:
		analog-input-mic: Mikrofon (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		iec958-stereo-input: Digitální vstup (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output: Analogový výstup (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
		iec958-stereo-output: Digitální výstup (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
0 sink input(s) available.
0 source output(s) available.
0 cache entrie(s) available.
Obrázek

Uživatelský avatar
redhawk
Guru Mintu
Příspěvky: 3032
Registrován: 12 led 2016, 19:14
Bydliště: ako kedy

Re: LM 19.2 nejde zvuk Audigy 2

#27 Příspěvek od redhawk » 10 srp 2019, 08:21

labeent píše:
10 srp 2019, 04:08

Live zkusím, repro jsou přes SPDIF - digitální koaxiál. Na LM 19.1 i na LM 19.2 Beta mi to normálně fungovalo. Nic jsem s nastavením zvuku nedělal. Pak proběhlo několik aktualizací a je to v háji. Tak jsem Betu přeinstaloval na "ostrou" verzi a na ní to od spuštění nejde rovnou. Nepomohlo ani nové jádro, co mi Mint nabídnul (5.0.0-23-generic).
Možná to může už zlobit kvůli těm pokusům, co se s tím dělaly, můžu to případně přeinstalovat znovu ...
no to by mohlo byt, taktiez ten prechod.
ale ak to ide v live, tak optimalne cista instalacia. bez noveho jadra.
on totiz ten upgrade v minte je dost choro spraveny. cista instalacia ma casto o 0,5-1GB menej nez upgrade
Pravděpodobně kecám.
Hlúposť užívateľa je úmerná jeho právam.
Podstatou pirátstva nie je túžba ľudí kradnúť, ale neschopnosť predať im veci, ktoré chcú.

Uživatelský avatar
labeent
Příspěvky: 74
Registrován: 14 lis 2012, 22:57

Re: LM 19.2 nejde zvuk Audigy 2

#28 Příspěvek od labeent » 11 srp 2019, 00:13

Já dělám vždycky novou instalaci. To jsem myslel updaty ze "Správy aktualizací" ...
Obrázek

Uživatelský avatar
redhawk
Guru Mintu
Příspěvky: 3032
Registrován: 12 led 2016, 19:14
Bydliště: ako kedy

Re: LM 19.2 nejde zvuk Audigy 2

#29 Příspěvek od redhawk » 11 srp 2019, 13:37

labeent píše:
11 srp 2019, 00:13
Já dělám vždycky novou instalaci. To jsem myslel updaty ze "Správy aktualizací" ...
jasne.
Pravděpodobně kecám.
Hlúposť užívateľa je úmerná jeho právam.
Podstatou pirátstva nie je túžba ľudí kradnúť, ale neschopnosť predať im veci, ktoré chcú.

Odpovědět