Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
Re: Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
Děkuji, až dorazím domů, vyzkouším.
Re: Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
Tak jsem to vyzkoušel, ale bohužel pořád stále stejné rozlišení, jen výpis:
Kód: Vybrat vše
pavel@pavel-OptiPlex-9020:~$ ls /etc/X11/xorg.conf.d
20-intel.conf
pavel@pavel-OptiPlex-9020:~$
Re: Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
.
Po restartu xrandr neukaze viac rozliseni ?
Ten 20-intel.conf by mal vypnut modesetting a zapnut intel neni vidiet zmenu v
?
Nepouzivas dake specialne parametre pri spusteni systemu ?
Toto ukaze vo vypise
takych prvych 50 riadkov
.
Po restartu xrandr neukaze viac rozliseni ?
Ten 20-intel.conf by mal vypnut modesetting a zapnut intel neni vidiet zmenu v
Kód: Vybrat vše
inxi -GxxNepouzivas dake specialne parametre pri spusteni systemu ?
Toto ukaze vo vypise
Kód: Vybrat vše
dmesg.
.
Re: Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
Nepoužívám nic speciálně nastavené. Toto je stav po výchozí instalaci.
Kód: Vybrat vše
pavel@pavel-OptiPlex-9020:~$ inxi -Gxx
Graphics:
Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics
vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0412
Display: x11 server: X.Org 1.20.5 driver: intel resolution: 1024x768~60Hz
OpenGL: renderer: Mesa DRI Intel Haswell Desktop v: 4.5 Mesa 19.2.8
compat-v: 3.0 direct render: Yes
pavel@pavel-OptiPlex-9020:~$ ^C
Re: Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
dmesg
Kód: Vybrat vše
pavel@pavel-OptiPlex-9020:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[ 0.000000] Linux version 5.4.0-37-generic (buildd@lcy01-amd64-026) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #41~18.04.1-Ubuntu SMP Mon Jun 8 13:37:29 UTC 2020 (Ubuntu 5.4.0-37.41~18.04.1-generic 5.4.41)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-37-generic root=UUID=159c9631-3ad9-4245-af6c-72cf1b78bd40 ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d1fd5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d1fd6000-0x00000000d1fdcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d1fdd000-0x00000000d2412fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d2413000-0x00000000d28aafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d28ab000-0x00000000d7eeafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7eeb000-0x00000000d7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d875ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8760000-0x00000000d87fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fadfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8fae000-0x00000000d8ffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da71d000-0x00000000da7fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbbcbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbbcc000-0x00000000dbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 9020/0XCR8D, BIOS A24 10/24/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3192.660 MHz processor
[ 0.002670] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002671] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002676] last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
[ 0.002680] MTRR default type: uncachable
[ 0.002680] MTRR fixed ranges enabled:
[ 0.002681] 00000-9FFFF write-back
[ 0.002682] A0000-BFFFF uncachable
[ 0.002682] C0000-DFFFF write-protect
[ 0.002683] E0000-E7FFF uncachable
[ 0.002683] E8000-FFFFF write-protect
[ 0.002683] MTRR variable ranges enabled:
[ 0.002684] 0 base 0000000000 mask 7E00000000 write-back
[ 0.002685] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.002686] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.002686] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.002687] 4 base 00DD000000 mask 7FFF000000 uncachable
[ 0.002687] 5 base 021F000000 mask 7FFF000000 uncachable
[ 0.002688] 6 base 021EE00000 mask 7FFFE00000 uncachable
[ 0.002688] 7 disabled
[ 0.002689] 8 disabled
[ 0.002689] 9 disabled
[ 0.002953] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003078] total RAM covered: 8126M
[ 0.003264] Found optimal setting for mtrr clean up
[ 0.003265] gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G
[ 0.003529] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.003532] last_pfn = 0xdbbcc max_arch_pfn = 0x400000000
[ 0.009349] found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf]
[ 0.011946] check: Scanning 1 areas for low memory corruption
[ 0.011949] Using GB pages for direct mapping
[ 0.011950] BRK [0x12ec01000, 0x12ec01fff] PGTABLE
[ 0.011951] BRK [0x12ec02000, 0x12ec02fff] PGTABLE
[ 0.011952] BRK [0x12ec03000, 0x12ec03fff] PGTABLE
[ 0.011972] BRK [0x12ec04000, 0x12ec04fff] PGTABLE
[ 0.011973] BRK [0x12ec05000, 0x12ec05fff] PGTABLE
[ 0.012053] BRK [0x12ec06000, 0x12ec06fff] PGTABLE
[ 0.012078] BRK [0x12ec07000, 0x12ec07fff] PGTABLE
[ 0.012150] BRK [0x12ec08000, 0x12ec08fff] PGTABLE
[ 0.012200] BRK [0x12ec09000, 0x12ec09fff] PGTABLE
[ 0.012246] BRK [0x12ec0a000, 0x12ec0afff] PGTABLE
[ 0.012307] BRK [0x12ec0b000, 0x12ec0bfff] PGTABLE
[ 0.012363] BRK [0x12ec0c000, 0x12ec0cfff] PGTABLE
[ 0.012510] RAMDISK: [mem 0x2fe45000-0x33f19fff]
[ 0.012521] ACPI: Early table checksum verification disabled
[ 0.012524] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL )
[ 0.012526] ACPI: XSDT 0x00000000D8FEE088 000094 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.012530] ACPI: FACP 0x00000000D8FF9B30 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.012534] ACPI: DSDT 0x00000000D8FEE1B0 00B97E (v02 DELL CBX3 00000014 INTL 20091112)
[ 0.012536] ACPI: FACS 0x00000000DA7FE080 000040
[ 0.012538] ACPI: APIC 0x00000000D8FF9C40 000072 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.012540] ACPI: FPDT 0x00000000D8FF9CB8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.012541] ACPI: SLIC 0x00000000D8FF9D00 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.012543] ACPI: LPIT 0x00000000D8FF9E78 00005C (v01 DELL CBX3 00000000 AMI. 00000005)
[ 0.012545] ACPI: SSDT 0x00000000D8FF9ED8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.012547] ACPI: SSDT 0x00000000D8FFA418 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.012549] ACPI: SSDT 0x00000000D8FFAEF0 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711)
[ 0.012551] ACPI: HPET 0x00000000D8FFB0B8 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.012552] ACPI: SSDT 0x00000000D8FFB0F0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.012554] ACPI: MCFG 0x00000000D8FFB460 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.012556] ACPI: SSDT 0x00000000D8FFB4A0 0034D6 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.012558] ACPI: ASF! 0x00000000D8FFE978 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.012560] ACPI: DMAR 0x00000000D8FFEA20 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.012566] ACPI: Local APIC address 0xfee00000
[ 0.012636] No NUMA configuration found
[ 0.012637] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
[ 0.012645] NODE_DATA(0) allocated [mem 0x21edd3000-0x21edfdfff]
[ 0.012798] Zone ranges:
[ 0.012799] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012799] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012800] Normal [mem 0x0000000100000000-0x000000021edfffff]
[ 0.012801] Device empty
[ 0.012801] Movable zone start for each node
[ 0.012804] Early memory node ranges
[ 0.012804] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.012805] node 0: [mem 0x0000000000100000-0x00000000d1fd5fff]
[ 0.012806] node 0: [mem 0x00000000d1fdd000-0x00000000d2412fff]
[ 0.012806] node 0: [mem 0x00000000d28ab000-0x00000000d7eeafff]
[ 0.012807] node 0: [mem 0x00000000d8000000-0x00000000d875ffff]
[ 0.012807] node 0: [mem 0x00000000d8800000-0x00000000d8fadfff]
[ 0.012807] node 0: [mem 0x00000000d9000000-0x00000000da71cfff]
[ 0.012808] node 0: [mem 0x00000000da800000-0x00000000dbbcbfff]
[ 0.012808] node 0: [mem 0x0000000100000000-0x000000021edfffff]
[ 0.013001] Zeroed struct page in unavailable ranges: 24109 pages
[ 0.013002] Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff]
[ 0.013003] On node 0 totalpages: 2073043
[ 0.013004] DMA zone: 64 pages used for memmap
[ 0.013004] DMA zone: 21 pages reserved
[ 0.013005] DMA zone: 3984 pages, LIFO batch:0
[ 0.013045] DMA32 zone: 13970 pages used for memmap
[ 0.013045] DMA32 zone: 894019 pages, LIFO batch:63
[ 0.023872] Normal zone: 18360 pages used for memmap
[ 0.023873] Normal zone: 1175040 pages, LIFO batch:63
[ 0.037471] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff]
[ 0.037524] ACPI: PM-Timer IO Port: 0x1808
[ 0.037526] ACPI: Local APIC address 0xfee00000
[ 0.037532] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.037547] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.037548] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.037549] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.037550] ACPI: IRQ0 used by override.
[ 0.037551] ACPI: IRQ9 used by override.
[ 0.037552] Using ACPI (MADT) for SMP configuration information
[ 0.037553] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.037557] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.037573] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.037574] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.037575] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.037575] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.037575] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.037576] PM: Registered nosave memory: [mem 0xd1fd6000-0xd1fdcfff]
[ 0.037578] PM: Registered nosave memory: [mem 0xd2413000-0xd28aafff]
[ 0.037579] PM: Registered nosave memory: [mem 0xd7eeb000-0xd7ffffff]
[ 0.037580] PM: Registered nosave memory: [mem 0xd8760000-0xd87fffff]
[ 0.037581] PM: Registered nosave memory: [mem 0xd8fae000-0xd8ffffff]
[ 0.037582] PM: Registered nosave memory: [mem 0xda71d000-0xda7fffff]
[ 0.037583] PM: Registered nosave memory: [mem 0xdbbcc000-0xdbffffff]
[ 0.037584] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[ 0.037584] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[ 0.037584] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.037585] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.037585] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.037585] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.037586] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.037586] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.037587] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.037587] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.037587] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.037588] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.037588] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.037588] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.037590] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.037591] Booting paravirtualized kernel on bare hardware
[ 0.037593] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.037598] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.037840] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.037845] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.037845] pcpu-alloc: [0] 0 1 2 3
[ 0.037869] Built 1 zonelists, mobility grouping on. Total pages: 2040628
[ 0.037869] Policy zone: Normal
[ 0.037871] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-37-generic root=UUID=159c9631-3ad9-4245-af6c-72cf1b78bd40 ro quiet splash vt.handoff=1
[ 0.038602] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.038939] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.038976] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.044385] Calgary: detecting Calgary via BIOS EBDA area
[ 0.044386] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.072044] Memory: 7982500K/8292172K available (14339K kernel code, 2378K rwdata, 4924K rodata, 2700K init, 5024K bss, 309672K reserved, 0K cma-reserved)
[ 0.072050] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
[ 0.072158] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.072169] Kernel/User page tables isolation: enabled
[ 0.072181] ftrace: allocating 44185 entries in 173 pages
[ 0.085380] rcu: Hierarchical RCU implementation.
[ 0.085381] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.085381] Tasks RCU enabled.
[ 0.085382] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.085382] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.087344] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.087618] random: crng done (trusting CPU's manufacturer)
[ 0.087640] spurious 8259A interrupt: IRQ7.
[ 0.087647] vt handoff: transparent VT on vt#1
[ 0.087652] Console: colour dummy device 80x25
[ 0.087656] printk: console [tty0] enabled
[ 0.087670] ACPI: Core revision 20190816
[ 0.087761] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.087773] APIC: Switch to symmetric I/O mode setup
[ 0.087774] DMAR: Host address width 39
[ 0.087775] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.087778] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.087779] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.087781] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.087781] DMAR: RMRR base: 0x000000dbd36000 end: 0x000000dbd43fff
[ 0.087782] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[ 0.087783] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.087784] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.087784] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.088270] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.088270] x2apic enabled
[ 0.088276] Switched APIC routing to cluster x2apic.
[ 0.088682] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.107778] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e0534129d4, max_idle_ns: 440795327792 ns
[ 0.107782] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.32 BogoMIPS (lpj=12770640)
[ 0.107783] pid_max: default: 32768 minimum: 301
[ 0.107808] LSM: Security Framework initializing
[ 0.107816] Yama: becoming mindful.
[ 0.107841] AppArmor: AppArmor initialized
[ 0.107884] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.107905] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.107916] *** VALIDATE tmpfs ***
[ 0.108024] *** VALIDATE proc ***
[ 0.108064] *** VALIDATE cgroup1 ***
[ 0.108065] *** VALIDATE cgroup2 ***
[ 0.108112] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.108124] process: using mwait in idle threads
[ 0.108126] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.108126] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.108128] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.108129] Spectre V2 : Mitigation: Full generic retpoline
[ 0.108130] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.108130] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.108131] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.108132] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.108134] SRBDS: Mitigation: Microcode
[ 0.108135] MDS: Mitigation: Clear CPU buffers
[ 0.108275] Freeing SMP alternatives memory: 40K
[ 0.109871] TSC deadline timer enabled
[ 0.109873] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.109963] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.109976] ... version: 3
[ 0.109976] ... bit width: 48
[ 0.109976] ... generic registers: 8
[ 0.109977] ... value mask: 0000ffffffffffff
[ 0.109977] ... max period: 00007fffffffffff
[ 0.109978] ... fixed-purpose events: 3
[ 0.109978] ... event mask: 00000007000000ff
[ 0.110007] rcu: Hierarchical SRCU implementation.
[ 0.110735] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.110775] smp: Bringing up secondary CPUs ...
[ 0.110837] x86: Booting SMP configuration:
[ 0.110838] .... node #0, CPUs: #1 #2 #3
[ 0.113251] smp: Brought up 1 node, 4 CPUs
[ 0.113251] smpboot: Max logical packages: 1
[ 0.113251] smpboot: Total of 4 processors activated (25541.28 BogoMIPS)
[ 0.113251] devtmpfs: initialized
[ 0.113251] x86/mm: Memory block size: 128MB
[ 0.113251] PM: Registering ACPI NVS region [mem 0xd1fd6000-0xd1fdcfff] (28672 bytes)
[ 0.113251] PM: Registering ACPI NVS region [mem 0xda71d000-0xda7fffff] (929792 bytes)
[ 0.113251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.113251] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.113251] pinctrl core: initialized pinctrl subsystem
[ 0.115859] PM: RTC time: 19:56:07, date: 2020-06-11
[ 0.115939] NET: Registered protocol family 16
[ 0.116001] audit: initializing netlink subsys (disabled)
[ 0.116005] audit: type=2000 audit(1591905367.028:1): state=initialized audit_enabled=0 res=1
[ 0.116005] EISA bus registered
[ 0.116005] cpuidle: using governor ladder
[ 0.116005] cpuidle: using governor menu
[ 0.116005] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.116005] ACPI: bus type PCI registered
[ 0.116005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116005] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.116005] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.116005] PCI: Using configuration type 1 for base access
[ 0.116005] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.116211] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.116819] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.116819] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.116819] ACPI: Added _OSI(Module Device)
[ 0.116819] ACPI: Added _OSI(Processor Device)
[ 0.116819] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116819] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.116819] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.116819] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.116819] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.128636] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.129761] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.130345] ACPI: Dynamic OEM Table Load:
[ 0.130349] ACPI: SSDT 0xFFFF8AEE55114C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.131177] ACPI: Dynamic OEM Table Load:
[ 0.131180] ACPI: SSDT 0xFFFF8AEE54EBE800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.132051] ACPI: Dynamic OEM Table Load:
[ 0.132054] ACPI: SSDT 0xFFFF8AEE54E27600 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.133340] ACPI: Interpreter enabled
[ 0.133362] ACPI: (supports S0 S3 S4 S5)
[ 0.133363] ACPI: Using IOAPIC for interrupt routing
[ 0.133385] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.133588] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.143735] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.143739] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.144354] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.144355] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.144803] PCI host bridge to bus 0000:00
[ 0.144805] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.144806] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.144806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.144807] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.144808] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.144808] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.144809] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.144816] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.144897] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.144905] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.144909] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.144912] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.144981] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.144988] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
[ 0.145081] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.145099] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
[ 0.145150] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.145222] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.145240] pci 0000:00:16.0: reg 0x10: [mem 0xf7c40000-0xf7c4000f 64bit]
[ 0.145295] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.145362] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 0.145378] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
[ 0.145385] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff]
[ 0.145392] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.145441] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.145512] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.145531] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff]
[ 0.145602] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.145676] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.145693] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
[ 0.145753] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.145824] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.145843] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
[ 0.145915] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.145988] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100
[ 0.146148] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[ 0.146162] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.146169] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.146175] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.146181] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.146187] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.146193] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
[ 0.146223] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.146288] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.146304] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
[ 0.146320] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.147150] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.147214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.147278] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.147337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.147399] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.147457] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.147519] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.147577] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.147829] iommu: Default domain type: Translated
[ 0.147896] SCSI subsystem initialized
[ 0.147904] libata version 3.00 loaded.
[ 0.147904] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.147904] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.147904] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.147904] vgaarb: loaded
[ 0.147904] ACPI: bus type USB registered
[ 0.147904] usbcore: registered new interface driver usbfs
[ 0.147904] usbcore: registered new interface driver hub
[ 0.147904] usbcore: registered new device driver usb
[ 0.147904] pps_core: LinuxPPS API ver. 1 registered
[ 0.147904] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.147904] PTP clock support registered
[ 0.147904] EDAC MC: Ver: 3.0.0
[ 0.147904] PCI: Using ACPI for IRQ routing
[ 0.149110] PCI: pci_cache_line_size set to 64 bytes
[ 0.149135] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
[ 0.149136] e820: reserve RAM buffer [mem 0xd1fd6000-0xd3ffffff]
[ 0.149137] e820: reserve RAM buffer [mem 0xd2413000-0xd3ffffff]
[ 0.149137] e820: reserve RAM buffer [mem 0xd7eeb000-0xd7ffffff]
[ 0.149138] e820: reserve RAM buffer [mem 0xd8760000-0xdbffffff]
[ 0.149138] e820: reserve RAM buffer [mem 0xd8fae000-0xdbffffff]
[ 0.149139] e820: reserve RAM buffer [mem 0xda71d000-0xdbffffff]
[ 0.149140] e820: reserve RAM buffer [mem 0xdbbcc000-0xdbffffff]
[ 0.149140] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
[ 0.149217] NetLabel: Initializing
[ 0.149217] NetLabel: domain hash size = 128
[ 0.149217] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.149228] NetLabel: unlabeled traffic allowed by default
[ 0.149238] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.149238] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.151782] clocksource: Switched to clocksource tsc-early
[ 0.160992] *** VALIDATE bpf ***
[ 0.161049] VFS: Disk quotas dquot_6.6.0
[ 0.161062] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.161081] *** VALIDATE ramfs ***
[ 0.161084] *** VALIDATE hugetlbfs ***
[ 0.161146] AppArmor: AppArmor Filesystem Enabled
[ 0.161166] pnp: PnP ACPI init
[ 0.161256] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.161260] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.161441] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.161442] system 00:01: [io 0xffff] has been reserved
[ 0.161443] system 00:01: [io 0xffff] has been reserved
[ 0.161444] system 00:01: [io 0xffff] has been reserved
[ 0.161445] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.161446] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.161446] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.161447] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.161448] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.161449] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.161451] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161466] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.161504] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.161506] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.161601] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.161604] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161641] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.161643] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162247] pnp 00:06: [dma 0 disabled]
[ 0.162275] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.162735] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.162736] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.162737] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.162738] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.162739] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.162740] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.162741] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.162741] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.162742] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.162743] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.162744] system 00:07: [mem 0xf7fee000-0xf7feefff] has been reserved
[ 0.162745] system 00:07: [mem 0xf7fd0000-0xf7fdffff] has been reserved
[ 0.162748] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.163004] pnp: PnP ACPI: found 8 devices
[ 0.163859] thermal_sys: Registered thermal governor 'fair_share'
[ 0.163859] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.163860] thermal_sys: Registered thermal governor 'step_wise'
[ 0.163860] thermal_sys: Registered thermal governor 'user_space'
[ 0.163861] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.168395] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.168417] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.168418] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.168419] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.168420] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[ 0.168421] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[ 0.168421] pci_bus 0000:00: resource 9 [mem 0xdf200000-0xfeafffff window]
[ 0.168517] NET: Registered protocol family 2
[ 0.168631] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.168680] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.168819] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.168983] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.169016] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.169038] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.169074] NET: Registered protocol family 1
[ 0.169077] NET: Registered protocol family 44
[ 0.169084] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.195868] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6b0 took 24584 usecs
[ 0.219862] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6b0 took 23424 usecs
[ 0.219877] PCI: CLS 64 bytes, default 64
[ 0.219904] Trying to unpack rootfs image as initramfs...
[ 0.908168] Freeing initrd memory: 66388K
[ 0.943804] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.943805] software IO TLB: mapped [mem 0xd3eeb000-0xd7eeb000] (64MB)
[ 0.943972] check: Scanning for low memory corruption every 60 seconds
[ 0.945049] Initialise system trusted keyrings
[ 0.945057] Key type blacklist registered
[ 0.945079] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.946052] zbud: loaded
[ 0.946318] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.946425] fuse: init (API version 7.31)
[ 0.946435] *** VALIDATE fuse ***
[ 0.946436] *** VALIDATE fuse ***
[ 0.946503] Platform Keyring initialized
[ 0.949980] Key type asymmetric registered
[ 0.949981] Asymmetric key parser 'x509' registered
[ 0.949987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.950012] io scheduler mq-deadline registered
[ 0.950105] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.950145] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.950145] vesafb: scrolling: redraw
[ 0.950146] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.950154] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000c06589bc, using 1216k, total 1216k
[ 0.950180] fbcon: Deferring console take-over
[ 0.950181] fb0: VESA VGA frame buffer device
[ 0.950190] intel_idle: MWAIT substates: 0x42120
[ 0.950190] intel_idle: v0.4.1 model 0x3C
[ 0.950310] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.950418] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.950446] ACPI: Power Button [PWRB]
[ 0.950472] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.950487] ACPI: Power Button [PWRF]
[ 0.950865] ACPI: Invalid active0 threshold
[ 0.950946] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.950946] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.951162] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.951163] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.951267] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.972030] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.973128] Linux agpgart interface v0.103
[ 0.974456] loop: module loaded
[ 0.974574] libphy: Fixed MDIO Bus: probed
[ 0.974574] tun: Universal TUN/TAP device driver, 1.6
[ 0.974590] PPP generic driver version 2.4.2
[ 0.974617] VFIO - User Level meta-driver version: 0.3
[ 0.974737] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.974739] ehci-pci: EHCI PCI platform driver
[ 0.974853] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.974857] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.974871] ehci-pci 0000:00:1a.0: debug port 2
[ 0.978792] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.978803] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000
[ 0.991844] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.991889] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.991890] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.991890] usb usb1: Product: EHCI Host Controller
[ 0.991891] usb usb1: Manufacturer: Linux 5.4.0-37-generic ehci_hcd
[ 0.991892] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.992062] hub 1-0:1.0: USB hub found
[ 0.992069] hub 1-0:1.0: 2 ports detected
[ 0.992337] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.992340] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.992355] ehci-pci 0000:00:1d.0: debug port 2
[ 0.996278] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.996290] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000
[ 1.011846] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.011898] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.011899] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.011899] usb usb2: Product: EHCI Host Controller
[ 1.011900] usb usb2: Manufacturer: Linux 5.4.0-37-generic ehci_hcd
[ 1.011901] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.012074] hub 2-0:1.0: USB hub found
[ 1.012078] hub 2-0:1.0: 2 ports detected
[ 1.012218] ehci-platform: EHCI generic platform driver
[ 1.012230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.012232] ohci-pci: OHCI PCI platform driver
[ 1.012240] ohci-platform: OHCI generic platform driver
[ 1.012244] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.012379] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.012383] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.013447] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 1.013451] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.013588] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.013589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.013590] usb usb3: Product: xHCI Host Controller
[ 1.013591] usb usb3: Manufacturer: Linux 5.4.0-37-generic xhci-hcd
[ 1.013591] usb usb3: SerialNumber: 0000:00:14.0
[ 1.013730] hub 3-0:1.0: USB hub found
[ 1.013752] hub 3-0:1.0: 15 ports detected
[ 1.016498] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.016500] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.016502] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.016532] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.016533] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.016534] usb usb4: Product: xHCI Host Controller
[ 1.016534] usb usb4: Manufacturer: Linux 5.4.0-37-generic xhci-hcd
[ 1.016535] usb usb4: SerialNumber: 0000:00:14.0
[ 1.016667] hub 4-0:1.0: USB hub found
[ 1.016683] hub 4-0:1.0: 6 ports detected
[ 1.017063] usb: port power management may be unreliable
[ 1.017211] i8042: PNP: No PS/2 controller found.
[ 1.017400] mousedev: PS/2 mouse device common for all mice
[ 1.017594] rtc_cmos 00:02: RTC can wake from S4
[ 1.017755] rtc_cmos 00:02: registered as rtc0
[ 1.017764] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.017768] i2c /dev entries driver
[ 1.017798] device-mapper: uevent: version 1.0.3
[ 1.017863] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.017880] platform eisa.0: Probing EISA bus 0
[ 1.017881] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.017882] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.017882] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.017883] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.017883] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.017884] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.017884] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.017885] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.017886] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.017886] platform eisa.0: EISA: Detected 0 cards
[ 1.017890] intel_pstate: Intel P-state driver initializing
[ 1.018126] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.018187] drop_monitor: Initializing network drop monitor service
[ 1.018313] NET: Registered protocol family 10
[ 1.022679] Segment Routing with IPv6
[ 1.022695] NET: Registered protocol family 17
[ 1.022764] Key type dns_resolver registered
[ 1.022999] RAS: Correctable Errors collector initialized.
[ 1.023030] microcode: sig=0x306c3, pf=0x2, revision=0x28
[ 1.023086] microcode: Microcode Update Driver: v2.2.
[ 1.023089] IPI shorthand broadcast: enabled
[ 1.023094] sched_clock: Marking stable (1022834603, 249228)->(1025509974, -2426143)
[ 1.023174] registered taskstats version 1
[ 1.023184] Loading compiled-in X.509 certificates
[ 1.024428] Loaded X.509 cert 'Build time autogenerated kernel key: 5a625796ffc2d7ee0e403fabc2ddd5e6c60bf0cc'
[ 1.024449] zswap: loaded using pool lzo/zbud
[ 1.024532] Key type ._fscrypt registered
[ 1.024533] Key type .fscrypt registered
[ 1.028314] Key type big_key registered
[ 1.030134] Key type encrypted registered
[ 1.030136] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.030140] ima: No TPM chip found, activating TPM-bypass!
[ 1.030144] ima: Allocated hash algorithm: sha1
[ 1.030149] ima: No architecture policies found
[ 1.030155] evm: Initialising EVM extended attributes:
[ 1.030155] evm: security.selinux
[ 1.030155] evm: security.SMACK64
[ 1.030156] evm: security.SMACK64EXEC
[ 1.030156] evm: security.SMACK64TRANSMUTE
[ 1.030156] evm: security.SMACK64MMAP
[ 1.030157] evm: security.apparmor
[ 1.030157] evm: security.ima
[ 1.030157] evm: security.capability
[ 1.030158] evm: HMAC attrs: 0x1
[ 1.030420] PM: Magic number: 8:732:950
[ 1.030440] tty tty7: hash matches
[ 1.030476] memory memory3: hash matches
[ 1.030522] rtc_cmos 00:02: setting system clock to 2020-06-11T19:56:08 UTC (1591905368)
[ 1.031370] Freeing unused decrypted memory: 2040K
[ 1.031759] Freeing unused kernel image memory: 2700K
[ 1.063855] Write protecting the kernel read-only data: 22528k
[ 1.064228] Freeing unused kernel image memory: 2008K
[ 1.064375] Freeing unused kernel image memory: 1220K
[ 1.071506] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.071507] x86/mm: Checking user space page tables
[ 1.078321] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.078322] Run /init as init process
[ 1.136704] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 1.138599] ahci 0000:00:1f.2: version 3.0
[ 1.138799] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode
[ 1.138801] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.141706] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.141707] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.141861] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.156047] scsi host0: ahci
[ 1.156240] scsi host1: ahci
[ 1.156342] scsi host2: ahci
[ 1.156397] scsi host3: ahci
[ 1.156493] scsi host4: ahci
[ 1.156558] scsi host5: ahci
[ 1.156593] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 27
[ 1.156596] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 27
[ 1.156596] ata3: DUMMY
[ 1.156597] ata4: DUMMY
[ 1.156597] ata5: DUMMY
[ 1.156597] ata6: DUMMY
[ 1.196114] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[ 1.196116] fb0: switching to inteldrmfb from VESA VGA
[ 1.196163] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.204434] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.204435] [drm] Driver supports precise vblank timestamp query.
[ 1.204766] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.221926] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.223244] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 1.224872] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.225374] acpi device:5e: registered as cooling_device4
[ 1.225445] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.240794] fbcon: i915drmfb (fb0) is primary device
[ 1.240795] fbcon: Deferring console take-over
[ 1.240796] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.298156] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:17:eb:a7:8e:ac
[ 1.298157] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.298196] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 1.300474] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.323819] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.347812] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.355820] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[ 1.471327] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.471343] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.471728] ata2.00: ATA-10: KINGSTON SA400S37480G, SBFKK1B3, max UDMA/133
[ 1.471729] ata2.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.472089] ata2.00: configured for UDMA/133
[ 1.472597] ata1.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
[ 1.472598] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 1.474202] ata1.00: configured for UDMA/133
[ 1.474307] scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
[ 1.474463] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.474464] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.474469] sd 0:0:0:0: [sda] Write Protect is off
[ 1.474470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.474477] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.474494] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.474676] scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 K1B3 PQ: 0 ANSI: 5
[ 1.474805] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.474856] sd 1:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 1.474882] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.474884] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.474908] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.480101] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[ 1.480102] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.480248] hub 1-1:1.0: USB hub found
[ 1.480346] hub 1-1:1.0: 6 ports detected
[ 1.488515] sdb: sdb1 sdb2
[ 1.489018] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.508261] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[ 1.508263] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.508490] hub 2-1:1.0: USB hub found
[ 1.508607] hub 2-1:1.0: 8 ports detected
[ 1.511071] usb 3-3: New USB device found, idVendor=0458, idProduct=003a, bcdDevice= 1.00
[ 1.511072] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.511073] usb 3-3: Product: Optical Mouse
[ 1.511074] usb 3-3: Manufacturer: Genius
[ 1.514975] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.517682] usbcore: registered new interface driver usbhid
[ 1.517683] usbhid: USB HID core driver
[ 1.518895] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0458:003A.0001/input/input3
[ 1.518963] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:14.0-3/input0
[ 1.554345] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.555029] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.639795] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[ 1.789548] usb 3-4: New USB device found, idVendor=03f0, idProduct=0e17, bcdDevice= 1.00
[ 1.789549] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.789550] usb 3-4: Product: hp LaserJet 1015
[ 1.789551] usb 3-4: Manufacturer: Hewlett-Packard
[ 1.789552] usb 3-4: SerialNumber: 00CNFD176087
[ 1.915860] usb 3-6: new low-speed USB device number 4 using xhci_hcd
[ 1.943864] tsc: Refined TSC clocksource calibration: 3192.589 MHz
[ 1.943870] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e04f15fa97, max_idle_ns: 440795287034 ns
[ 1.943891] clocksource: Switched to clocksource tsc
[ 2.068345] usb 3-6: New USB device found, idVendor=0566, idProduct=3002, bcdDevice= 1.01
[ 2.068347] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.072556] input: HID 0566:3002 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:0566:3002.0002/input/input4
[ 2.132059] hid-generic 0003:0566:3002.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:14.0-6/input0
[ 2.139134] input: HID 0566:3002 System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:0566:3002.0003/input/input5
[ 2.196025] input: HID 0566:3002 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:0566:3002.0003/input/input6
[ 2.196187] hid-generic 0003:0566:3002.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:14.0-6/input1
[ 2.323835] usb 3-10: new high-speed USB device number 5 using xhci_hcd
[ 2.473662] usb 3-10: New USB device found, idVendor=04a9, idProduct=190a, bcdDevice= 7.01
[ 2.473664] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.473665] usb 3-10: Product: CanoScan
[ 2.473666] usb 3-10: Manufacturer: Canon
[ 2.539802] raid6: avx2x4 gen() 32423 MB/s
[ 2.587801] raid6: avx2x4 xor() 19880 MB/s
[ 2.635800] raid6: avx2x2 gen() 27933 MB/s
[ 2.683801] raid6: avx2x2 xor() 17385 MB/s
[ 2.731801] raid6: avx2x1 gen() 24518 MB/s
[ 2.779802] raid6: avx2x1 xor() 16661 MB/s
[ 2.827802] raid6: sse2x4 gen() 17479 MB/s
[ 2.875801] raid6: sse2x4 xor() 11074 MB/s
[ 2.923802] raid6: sse2x2 gen() 14629 MB/s
[ 2.971802] raid6: sse2x2 xor() 9980 MB/s
[ 3.019803] raid6: sse2x1 gen() 12227 MB/s
[ 3.067800] raid6: sse2x1 xor() 8713 MB/s
[ 3.067801] raid6: using algorithm avx2x4 gen() 32423 MB/s
[ 3.067801] raid6: .... xor() 19880 MB/s, rmw enabled
[ 3.067802] raid6: using avx2x2 recovery algorithm
[ 3.070176] xor: automatically using best checksumming function avx
[ 3.082894] Btrfs loaded, crc32c=crc32c-intel
[ 3.789711] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.054883] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.072015] systemd[1]: Detected architecture x86-64.
[ 5.101849] systemd[1]: Set hostname to <pavel-OptiPlex-9020>.
[ 6.824056] systemd[1]: Reached target Remote File Systems.
[ 6.824148] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.824293] systemd[1]: Created slice User and Session Slice.
[ 6.824444] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.824545] systemd[1]: Created slice System Slice.
[ 6.824655] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.824697] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.991467] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 7.117796] lp: driver loaded but no devices found
[ 7.134052] systemd-journald[421]: Received request to flush runtime journal from PID 1
[ 7.148884] ppdev: user-space parallel port driver
[ 9.380194] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 9.565561] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7
[ 9.815519] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-213)
[ 9.815523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.815530] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
[ 9.815532] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.815533] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-213)
[ 9.815535] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
[ 9.815537] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.815537] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-213)
[ 9.815539] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
[ 9.815541] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.815541] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.924849] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 9.924850] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 9.924851] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 9.924851] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 9.924851] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 10.692690] cryptd: max_cpu_qlen set to 1000
[ 10.979717] AVX2 version of gcm_enc/dec engaged.
[ 10.979718] AES CTR mode by8 optimization enabled
[ 11.348434] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.379542] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 11.379576] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 11.379609] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 11.379637] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 11.556836] intel_rapl_common: Found RAPL domain package
[ 11.556837] intel_rapl_common: Found RAPL domain core
[ 11.556838] intel_rapl_common: Found RAPL domain uncore
[ 11.556838] intel_rapl_common: Found RAPL domain dram
[ 11.556840] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 11.556843] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[ 11.568151] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 11.568152] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 11.568153] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 11.568154] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 11.568154] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 11.568156] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x1a
[ 11.568156] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 11.616910] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 11.616952] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 11.616985] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 11.617024] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 12.967810] Adding 1394684k swap on /dev/sda7. Priority:-2 extents:1 across:1394684k FS
[ 15.022284] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 16.496693] audit: type=1400 audit(1591905383.961:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=726 comm="apparmor_parser"
[ 16.517731] audit: type=1400 audit(1591905383.981:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=727 comm="apparmor_parser"
[ 16.521025] audit: type=1400 audit(1591905383.985:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=725 comm="apparmor_parser"
[ 16.521027] audit: type=1400 audit(1591905383.985:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=725 comm="apparmor_parser"
[ 16.521029] audit: type=1400 audit(1591905383.985:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=725 comm="apparmor_parser"
[ 16.525136] audit: type=1400 audit(1591905383.989:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=723 comm="apparmor_parser"
[ 16.525137] audit: type=1400 audit(1591905383.989:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
[ 16.525139] audit: type=1400 audit(1591905383.989:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=723 comm="apparmor_parser"
[ 16.525140] audit: type=1400 audit(1591905383.989:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
[ 16.527724] audit: type=1400 audit(1591905383.989:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=730 comm="apparmor_parser"
[ 18.162912] usblp 3-4:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0E17
[ 18.162930] usbcore: registered new interface driver usblp
[ 25.672780] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 25.672789] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[ 25.672848] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 26.290262] usblp1: removed
[ 26.300257] usblp 3-4:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0E17
[ 26.609309] fbcon: Taking over console
[ 26.635392] Console: switching to colour frame buffer device 128x48
pavel@pavel-OptiPlex-9020:~$
Re: Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
.
Modeseting tam uz neni
Skusil si to uz zmenit, xrandr neukaze lespie rozliseni ?
Robilo to uz predtym na nakom jinom linuxe ?
.
Modeseting tam uz neni
Kód: Vybrat vše
Display: x11 server: X.Org 1.20.5 driver: intel resolution: 1024x768~60HzRobilo to uz predtym na nakom jinom linuxe ?
.
.
Re: Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
Na tomto počítači se mě prozatím nepodařilo rozchodit větší rozlišení. 
Xrandr neukazuje nic jiného. Když jsem to tam chtěl natvrdo dodat pomocí:
gtf 1920 1080 60
xrandr --newmode "1920x1080" .....
xrandr --addmode VGA1 1920x1080
a
xrandr --output VGA1 --mode 1820x1080,
tak to pouze problikne. V grafice poté vidím volbu 1920x1080, ale s chybou
Xrandr neukazuje nic jiného. Když jsem to tam chtěl natvrdo dodat pomocí:
gtf 1920 1080 60
xrandr --newmode "1920x1080" .....
xrandr --addmode VGA1 1920x1080
a
xrandr --output VGA1 --mode 1820x1080,
tak to pouze problikne. V grafice poté vidím volbu 1920x1080, ale s chybou
Naposledy upravil(a) psipek dne 11 čer 2020, 23:08, celkem upraveno 1 x.
Re: Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
.
Mohol by si upravit ten subor 20-intel.conf a doplnit tam
tri radky
Aby to vypadalo takto:
Ulozit a restart.
.
Mohol by si upravit ten subor 20-intel.conf a doplnit tam
tri radky
Aby to vypadalo takto:
Kód: Vybrat vše
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "UseEDID" "False"
#Option "UseEDIDDPI "False"
#Option "UseEDIDFreqs" "False"
EndSection.
.
Re: Integrovaná karta Intel -nejde nastavit rozlišení 1920x1080
Nepomohlo
pavel@pavel-OptiPlex-9020:~$ vi /etc/X11/xorg.conf.d/20-intel.conf
Kód: Vybrat vše
pavel@pavel-OptiPlex-9020:~$ xrandr
Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VGA1 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.00*
800x600 60.32 56.25
848x480 60.00
640x480 59.94
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
pavel@pavel-OptiPlex-9020:~$ Kód: Vybrat vše
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "UseEDID" "False"
#Option "UseEDIDDPI "False"
#Option "UseEDIDFreqs" "False"
EndSection