Nastavenie zvuku v LMDE 2

[juhele2014]

Trochu sem hledal a našel tuto diskuzi http://forums.linuxmint.com/viewtopic.php?f=196&t=76291 Na konci dole je odkaz a potom na další diskuzi zmiňují tento příkaz

Kód: Vybrat vše

sudo apt-get install pavucontrol

Je to ono

[vivalin]

stejný problém je u Debian 8 Jessie. V pavucontrol nastavim vstup USB mikrofon(webkamera) ,výstup analogové stereo output. Po resetu čí vypnutí PC. Se vše vrátí na analogové duplexní stereo .

Mint Mate 17.2 vše funguje jak má.

[vivalin]

Debian Jessie MATE

Předvolby zvuku - Hardware - vnitřní zvukový systém (moje volba) - výstup : analogové stereo Output

vstup : Live Cam socialize (VF0640) Analogové mono

radek@hp-linux:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
radek@hp-linux:~$

radek@hp-linux:~$ pacmd list-cards
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf0520000 irq 44"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "284b"
device.product.name = "82801H (ICH8 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Vnitřní zvukový systém"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analogové stereo Input (priority 60, available: unknown)
output:analog-stereo: Analogové stereo Output (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Analogové duplexní stereo (priority 6060, available: unknown)
off: Vypnuto (priority 0, available: unknown)
active profile: <output:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Vnitřní zvukový systém Analogové stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Vnitřní zvukový systém Analogové stereo
ports:
analog-input: Analogový vstup (priority 10000, latency offset 0 usec, available: unknown)
properties:

analog-input-mic: Mikrofon (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Linkový vstup (priority 8100, latency offset 0 usec, available: no)
properties:

analog-output: Analogový výstup (priority 9900, latency offset 0 usec, available: unknown)
properties:

analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: yes)
properties:

analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Analogová sluchátka (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
index: 1
name: <alsa_card.usb-Creative_Labs_VF0640_Live__Cam_Socialize_2H250557-02-Socialize>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "1"
alsa.card_name = "VF0640 Live! Cam Socialize"
alsa.long_card_name = "Creative Labs VF0640 Live! Cam Socialize at usb-0000:00:1d.7-4, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.7-usb-0:4:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.2/sound/card1"
udev.id = "usb-Creative_Labs_VF0640_Live__Cam_Socialize_2H250557-02-Socialize"
device.bus = "usb"
device.vendor.id = "041e"
device.vendor.name = "Creative Technology, Ltd"
device.product.id = "4083"
device.product.name = "Live! Cam Socialize [VF0640]"
device.serial = "Creative_Labs_VF0640_Live__Cam_Socialize_2H250557"
device.form_factor = "webcam"
device.string = "1"
device.description = "Live! Cam Socialize [VF0640]"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
profiles:
input:analog-mono: Analogové mono Input (priority 1, available: unknown)
off: Vypnuto (priority 0, available: unknown)
active profile: <input:analog-mono>
sources:
alsa_input.usb-Creative_Labs_VF0640_Live__Cam_Socialize_2H250557-02-Socialize.analog-mono/#2: Live! Cam Socialize [VF0640] Analogové mono
ports:
analog-input-mic: Mikrofon (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
radek@hp-linux:~$
radek@hp-linux:~$ sudo pluma /etc/pulse/default.pa



### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.

### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system

### Register ourselves in the X11 session manager
#load-module module-x11-xsmp

### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif

### Make some devices default
#set-default-sink output
#set-default-source input

[vivalin]

Kam a kde mam co dopsat

Potřebuji
- vnitřní zvukový systém (moje volba) - výstup : analogové stereo Output
vstup : Live Cam socialize (VF0640) Analogové mono

Po každém vypnutí se vše vrátí do Analogové duplexní stereo