Nastavení VSFTPD pro anonymous přístup

WiFi, drátové sítě atd.
Zamčeno
Zpráva
Autor
Uživatelský avatar
kohak
Příspěvky: 42
Registrován: 11 úno 2015, 20:03
Bydliště: Plzeň

Nastavení VSFTPD pro anonymous přístup

#1 Příspěvek od kohak »

Ahoj, potřeboval bych poradit jak nastavit vsFTPd server pro zápis do adresáře jako anonymous.
Tady je moje nastavení vsftpd.conf

Kód: Vybrat vše

# Anonymní přístustup /etc/vsftpd.conf
#
listen=YES
#
# Povolený anonymous FTP (uživatelé ftp a anonymous)
anonymous_enable=YES
no_anon_password=YES
#
# Povolení místních uživatelů
local_enable=YES
chroot_local_user=YES
#
# Nastavení jiného adresáře pro FTP data
anon_root=/home/ftp/
#
# Povolení zápisu
write_enable=YES
anon_other_write_enable=YES
anon_world_readable_only=YES
anon_upload_enable=YES
ascii_upload_enable=YES
allow_writeable_chroot=YES
#
# VYtvoření nových adresářů
anon_mkdir_write_enable=YES
#
# Nastavení lokálního času
use_localtime=YES
#
# Aktivní zapis do logsouboru uploads/downloads
xferlog_enable=YES
#
# Nastavení portu pro přenos dat port 20 (ftp-data)
connect_from_port_20=YES
#
# Nastavení vlastníka anonymních dat
chown_uploads=YES
chown_username=babideda
#
# Nastavení přihlašovací fráze
ftpd_banner=Vítejtena Mint FTP serveru BabiDěda...
#
# Zákaz šifrování
ssl_enable=NO
#
dirmessage_enable=YES
Končím vždy hláškou 500 OOPS: vsftpd: refusing to run with writable root inside chroot().
Tato chyba zmizí, když odeberu adresáři práva na zápis. To zas do něj nezapíšu.
Je to začarovanej kruh.

Díky za radu.
Mint 16.1 Serena Mate 1.16.1 Intel DualCore I7 @ 3.50GHz NVIDIA GeForce 940MX RAM 15914 MB

Uživatelský avatar
Allconius
Příspěvky: 820
Registrován: 06 čer 2013, 18:42
Bydliště: Brno

Re: Nastavení VSFTPD pro anonymous přístup

#2 Příspěvek od Allconius »

Ahoj, podle mě to máš dobře viz: http://linux-tips.org/t/500-oops-vsftpd ... chroot/249 každopádně je to nějaký obecnější problém (hodně se toho vygooglí: https://www.google.cz/?gfe_rd=cr&ei=FVs ... root%28%29). Jedině to zkusit přeinstalovat jak píší tady: http://stackoverflow.com/questions/1610 ... ide-chroot
Tj. :

Kód: Vybrat vše

sudo apt-get install python-software-properties
sudo add-apt-repository ppa:thefrontiergroup/vsftpd
sudo apt-get update
sudo apt-get install vsftpd
sudo vi /etc/vsftpd.conf (přidat allow_writeable_chroot=YES)
sudo service vsftpd restart
LinuxMint 19 MATE (64bit) # MSI Z77A-G43, i3-3220 CPU @ 3.30GHz, NVIDIA GeForce GT 730, KHX1600C9D3P1K2/32G, WD20EFRX, Kernel: 4.15.0-43-generic x86_64

Uživatelský avatar
kohak
Příspěvky: 42
Registrován: 11 úno 2015, 20:03
Bydliště: Plzeň

Re: Nastavení VSFTPD pro anonymous přístup

#3 Příspěvek od kohak »

Díky za info, ale všechny tyhle odkazy jsem již prošel. Zřejmě je to chyba vsftpd.
A novější verzi z repozitáře nenaistaluju, protože nejde přidat.
Tohle ppa nepodporuje trusty. Škoda vše ostatní funguje.
Zkoušel jsem verzi 3.0.3, ale deb balíček nikde není a při překladu
ze zdrojů to vždy vypadne s chybovou hláškou.
Ale je fajn, že sis na mě našel chvilku.
Mint 16.1 Serena Mate 1.16.1 Intel DualCore I7 @ 3.50GHz NVIDIA GeForce 940MX RAM 15914 MB

Uživatelský avatar
Allconius
Příspěvky: 820
Registrován: 06 čer 2013, 18:42
Bydliště: Brno

Re: Nastavení VSFTPD pro anonymous přístup

#4 Příspěvek od Allconius »

Ahoj, pro LM je jen ta verze 3.0.2 co jsem pochopil, proto ti to asi nešlo. Zkusil jsem instalaci z repozitáře:

Kód: Vybrat vše

sudo apt-get update
sudo apt-get install vsftpd
sudo gedit /etc/vsftpd.conf
s nastavením:

Kód: Vybrat vše

# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#

#local_root=/home/jouda/files/
anon_root=/home/jouda/files
dirlist_enable=YES
download_enable=YES
guest_username=user


# Allow anonymous FTP? (Disabled by default)
anonymous_enable=YES
no_anon_password=YES

#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES
anon_other_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in  your  local  time  zone.  The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key

Kód: Vybrat vše

sudo service vsftpd restart
jako anonymous se přihlásím, ale nic nezkopíruju viz. obrázek
Přílohy
obrazek.png
LinuxMint 19 MATE (64bit) # MSI Z77A-G43, i3-3220 CPU @ 3.30GHz, NVIDIA GeForce GT 730, KHX1600C9D3P1K2/32G, WD20EFRX, Kernel: 4.15.0-43-generic x86_64

Zamčeno