SIS chipset

Problémy s instalací nebo spouštěním systému Linux Mint
Zamčeno
Zpráva
Autor
etis
Příspěvky: 5
Registrován: 21 dub 2020, 15:22

SIS chipset

#1 Příspěvek od etis »

Dobrý deň.
Chcel by som použiť starý PC s Core2Duo a SIS chipset... PC bude bez monitoru, pôjde na ňom len jedna aplikácia a na tento účel stačí.
Ide o to že zatiaľ sa mi podarilo to rozchodiť len ak spustím LIVE s režimom kompatibility. Takto mi to funguje v poriadku.
Inak systém nenabehne (obraz je biely s farebnými bodmi). Skúšal som rôzne distribúcie, rôzne verzie ale nič. Teda ak nemyslím veľmi staré verzie, kde sa ešte so SIS chipsetom rátalo....
Je možnosť ako nainštalovať a potom spúšťať Mint v režime kompatibility????
Ďakujem....

menom
Příspěvky: 2757
Registrován: 12 pro 2012, 15:10

Re: SIS chipset

#2 Příspěvek od menom »

etis píše: 21 dub 2020, 15:34 Ide o to že zatiaľ sa mi podarilo to rozchodiť len ak spustím LIVE s režimom kompatibility. Takto mi to funguje v poriadku.

Je možnosť ako nainštalovať a potom spúšťať Mint v režime kompatibility?
.

Ta moznost tu urcite je.
Mohol by si v tom LIVE s režimom kompatibility
do terminalu zadat

Kód: Vybrat vše

dmesg
a kopirovat sem priblizne takch prvych 50 riadkov.

.
.

Uživatelský avatar
Ventero1
Příspěvky: 2763
Registrován: 31 říj 2016, 14:17
Bydliště: Sokolov, Olomouc

Re: SIS chipset

#3 Příspěvek od Ventero1 »

SiS se nedavno podrobneji resil bud tady nebo vedle na Ubu foru. Zkus trochu pohledat - ja uz dneska nemam silu ...
Zvuky jsou mantrami a myšlenky moudrostí, prostě proto, že se mohou objevovat ...

etis
Příspěvky: 5
Registrován: 21 dub 2020, 15:22

Re: SIS chipset

#4 Příspěvek od etis »

Kód: Vybrat vše

mint@mint:~$ dmesg
[    0.000000] Linux version 5.0.0-32-generic (buildd@lgw01-amd64-015) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #34~18.04.2-Ubuntu SMP Thu Oct 10 10:36:02 UTC 2019 (Ubuntu 5.0.0-32.34~18.04.2-generic 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper xforcevesa nomodeset b43.blacklist=yes initrd=/casper/initrd.lz ramdisk_size=1048576 root=/dev/ram rw noapic noacpi nosplash irqpoll --
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Acer                  ASSA90/APS290        /F671CR             , BIOS R01-C0 07/04/2007
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2400.156 MHz processor
[    0.007433] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.007435] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.007441] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
[    0.007455] MTRR default type: uncachable
[    0.007456] MTRR fixed ranges enabled:
[    0.007458]   00000-9FFFF write-back
[    0.007459]   A0000-BFFFF uncachable
[    0.007460]   C0000-CEFFF write-protect
[    0.007461]   CF000-EFFFF uncachable
[    0.007462]   F0000-FFFFF write-through
[    0.007463] MTRR variable ranges enabled:
[    0.007464]   0 base 000000000 mask F80000000 write-back
[    0.007465]   1 disabled
[    0.007466]   2 disabled
[    0.007467]   3 disabled
[    0.007467]   4 disabled
[    0.007468]   5 disabled
[    0.007469]   6 disabled
[    0.007469]   7 disabled
[    0.012065] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.017387] found SMP MP-table at [mem 0x000f3b70-0x000f3b7f]
[    0.062531] check: Scanning 1 areas for low memory corruption
[    0.062542] BRK [0x3fc01000, 0x3fc01fff] PGTABLE
[    0.062544] BRK [0x3fc02000, 0x3fc02fff] PGTABLE
[    0.062546] BRK [0x3fc03000, 0x3fc03fff] PGTABLE
[    0.062594] BRK [0x3fc04000, 0x3fc04fff] PGTABLE
[    0.062597] BRK [0x3fc05000, 0x3fc05fff] PGTABLE
[    0.062762] BRK [0x3fc06000, 0x3fc06fff] PGTABLE
[    0.062792] RAMDISK: [mem 0x7da36000-0x7ffeffff]
[    0.062801] ACPI: Early table checksum verification disabled
[    0.083661] ACPI: RSDP 0x00000000000F7CC0 000014 (v00 ACRSYS)
[    0.083665] ACPI: RSDT 0x000000007FFF3040 000044 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.083673] ACPI: FACP 0x000000007FFF30C0 000074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.083682] ACPI: DSDT 0x000000007FFF3180 003D7E (v01 ACRSYS AWRDACPI 00001000 MSFT 03000000)
[    0.083686] ACPI: FACS 0x000000007FFF0000 000040
[    0.083690] ACPI: HPET 0x000000007FFF7040 000038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
[    0.083695] ACPI: SLIC 0x000000007FFF70C0 000176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000020)
[    0.083700] ACPI: _WDT 0x000000007FFF7280 000047 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.083704] ACPI: MCFG 0x000000007FFF7340 00003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.083709] ACPI: APIC 0x000000007FFF6F40 000084 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.083713] ACPI: SSDT 0x000000007FFF73C0 00015C (v01 PmRef  Cpu0Ist  00003000 INTL 20041203)
[    0.083718] ACPI: SSDT 0x000000007FFF7850 0002F1 (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.083733] ACPI: Local APIC address 0xfee00000
[    0.083848] No NUMA configuration found
[    0.083850] Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
[    0.083864] NODE_DATA(0) allocated [mem 0x7da0b000-0x7da35fff]
[    0.084208] Zone ranges:
[    0.084209]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.084212]   DMA32    [mem 0x0000000001000000-0x000000007ffeffff]
[    0.084213]   Normal   empty
[    0.084215]   Device   empty
[    0.084216] Movable zone start for each node
[    0.084220] Early memory node ranges
[    0.084221]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.084223]   node   0: [mem 0x0000000000100000-0x000000007ffeffff]
[    0.084227] Zeroed struct page in unavailable ranges: 98 pages
[    0.084228] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
[    0.084231] On node 0 totalpages: 524174
[    0.084232]   DMA zone: 64 pages used for memmap
[    0.084233]   DMA zone: 21 pages reserved
[    0.084234]   DMA zone: 3998 pages, LIFO batch:0
[    0.084368]   DMA32 zone: 8128 pages used for memmap
[    0.084369]   DMA32 zone: 520176 pages, LIFO batch:63
[    0.126005] ACPI: PM-Timer IO Port: 0x1008
[    0.126015] ACPI: Local APIC address 0xfee00000
[    0.126036] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.126038] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.126040] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.126041] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.126044] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[    0.126046] Using ACPI for processor (LAPIC) configuration information
[    0.126050] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.126065] Intel MultiProcessor Specification v1.4
[    0.126071] MPTABLE: OEM ID: OEM00000
[    0.126072] MPTABLE: Product ID: PROD00000000
[    0.126073] MPTABLE: APIC at: 0xFEE00000
[    0.126085] IOAPIC[0]: apic_id 4, version 20, address 0xfec00000, GSI 0-23
[    0.126087] Processors: 2
[    0.126092] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.126120] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.126122] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.126123] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.126124] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.126129] [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.126131] Booting paravirtualized kernel on bare hardware
[    0.126140] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.126171] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.126184] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.128273] percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u524288
[    0.128286] pcpu-alloc: s155648 r8192 d28672 u524288 alloc=1*2097152
[    0.128288] pcpu-alloc: [0] 0 1 2 3 
[    0.128338] Built 1 zonelists, mobility grouping on.  Total pages: 515961
[    0.128340] Policy zone: DMA32
[    0.128346] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper xforcevesa nomodeset b43.blacklist=yes initrd=/casper/initrd.lz ramdisk_size=1048576 root=/dev/ram rw noapic noacpi nosplash irqpoll --
[    0.128548] You have booted with nomodeset. This means your GPU drivers are DISABLED
[    0.128549] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
[    0.128551] Unless you actually understand what nomodeset does, you should reboot without enabling it
[    0.128747] Misrouted IRQ fixup and polling support enabled
[    0.128748] This may significantly impact system performance
[    0.128864] Calgary: detecting Calgary via BIOS EBDA area
[    0.128866] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.177112] Memory: 1989388K/2096696K available (14339K kernel code, 2335K rwdata, 4408K rodata, 2588K init, 5192K bss, 107308K reserved, 0K cma-reserved)
[    0.177408] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.177436] Kernel/User page tables isolation: enabled
[    0.177510] ftrace: allocating 41617 entries in 163 pages
[    0.205329] rcu: Hierarchical RCU implementation.
[    0.205334] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.205336] 	Tasks RCU enabled.
[    0.205338] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.205340] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.209458] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.214315] Console: colour VGA+ 80x25
[    0.219169] printk: console [tty0] enabled
[    0.219250] ACPI: Core revision 20181213
[    0.219415] ACPI: setting ELCR to 0200 (from 8e20)
[    0.219561] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.219635] hpet clockevent registered
[    0.219639] APIC: Switch to symmetric I/O mode setup
[    0.219687] Not enabling interrupt remapping due to skipped IO-APIC setup
[    0.219746] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2298cb07e2a, max_idle_ns: 440795294045 ns
[    0.219830] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.31 BogoMIPS (lpj=9600624)
[    0.219896] pid_max: default: 32768 minimum: 301
[    0.219993] LSM: Security Framework initializing
[    0.220060] Yama: becoming mindful.
[    0.220138] AppArmor: AppArmor initialized
[    0.221727] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.222833] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.222939] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.223020] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.223616] mce: CPU0: Thermal monitoring enabled (TM2)
[    0.223842] process: using mwait in idle threads
[    0.223900] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.223949] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.224001] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.224065] Spectre V2 : Mitigation: Full generic retpoline
[    0.224115] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.224177] Speculative Store Bypass: Vulnerable
[    0.224268] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.224563] Freeing SMP alternatives memory: 36K
[    0.336533] smpboot: CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0x6)
[    0.336811] Performance Events: PEBS fmt0-, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.336881] core: PEBS disabled due to CPU errata
[    0.336932] ... version:                2
[    0.336979] ... bit width:              40
[    0.337027] ... generic registers:      2
[    0.337075] ... value mask:             000000ffffffffff
[    0.337124] ... max period:             000000007fffffff
[    0.337173] ... fixed-purpose events:   3
[    0.337220] ... event mask:             0000000700000003
[    0.337334] rcu: Hierarchical SRCU implementation.
[    0.339037] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.339183] smp: Bringing up secondary CPUs ...
[    0.339416] x86: Booting SMP configuration:
[    0.339466] .... node  #0, CPUs:      #1
[    0.339925] smp: Brought up 1 node, 2 CPUs
[    0.339925] smpboot: Max logical packages: 2
[    0.339974] smpboot: Total of 2 processors activated (9600.62 BogoMIPS)
[    0.344121] devtmpfs: initialized
[    0.344121] x86/mm: Memory block size: 128MB
[    0.344543] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes)
[    0.344543] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.344543] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.344543] pinctrl core: initialized pinctrl subsystem
[    0.344543] RTC time: 06:51:07, date: 2020-04-21
[    0.344543] NET: Registered protocol family 16
[    0.344543] audit: initializing netlink subsys (disabled)
[    0.344543] audit: type=2000 audit(1587451867.124:1): state=initialized audit_enabled=0 res=1
[    0.344543] EISA bus registered
[    0.344543] cpuidle: using governor ladder
[    0.344543] cpuidle: using governor menu
[    0.344543] ACPI: bus type PCI registered
[    0.344543] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.344543] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.344543] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.344543] PCI: Using configuration type 1 for base access
[    0.349109] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.349109] ACPI: Added _OSI(Module Device)
[    0.349109] ACPI: Added _OSI(Processor Device)
[    0.349109] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.349109] ACPI: Added _OSI(Processor Aggregator Device)
[    0.349109] ACPI: Added _OSI(Linux-Dell-Video)
[    0.349109] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.349592] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.355899] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.359638] ACPI: Dynamic OEM Table Load:
[    0.359701] ACPI: SSDT 0xFFFF91B13AAEC600 000087 (v01 PmRef  Cpu1Ist  00003000 INTL 20041203)
[    0.360380] ACPI: Interpreter enabled
[    0.360459] ACPI: (supports S0 S1 S3 S4 S5)
[    0.360509] ACPI: Using PIC for interrupt routing
[    0.360615] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.360971] ACPI: Enabled 6 GPEs in block 00 to 0F
[    0.361025] ACPI: Enabled 2 GPEs in block 10 to 1F
[    0.368189] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.368248] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.368315] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.368444] acpi PNP0A08:00: host bridge window expanded to [io  0x1100-0xffff]; [io  0x1100-0xffff window] ignored
[    0.368788] PCI host bridge to bus 0000:00
[    0.368838] pci_bus 0000:00: root bus resource [io  0x0000-0x047f window]
[    0.368890] pci_bus 0000:00: root bus resource [io  0x0480-0x048f]
[    0.368941] pci_bus 0000:00: root bus resource [io  0x0490-0x0cf7 window]
[    0.368992] pci_bus 0000:00: root bus resource [io  0x0d00-0x0fff window]
[    0.369044] pci_bus 0000:00: root bus resource [io  0x1000-0x10cf]
[    0.369094] pci_bus 0000:00: root bus resource [io  0x1100-0xffff]
[    0.369145] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.369207] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.369269] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.369329] pci 0000:00:00.0: [1039:0671] type 00 class 0x060000
[    0.369499] pci 0000:00:01.0: [1039:0004] type 01 class 0x060400
[    0.369538] pci 0000:00:01.0: enabling Extended Tags
[    0.369631] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.369758] pci 0000:00:02.0: [1039:0968] type 00 class 0x060100
[    0.369943] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
[    0.369962] pci 0000:00:02.5: reg 0x10: [io  0x01f0-0x01f7]
[    0.369971] pci 0000:00:02.5: reg 0x14: [io  0x03f4-0x03f7]
[    0.369979] pci 0000:00:02.5: reg 0x18: [io  0x0170-0x0177]
[    0.369988] pci 0000:00:02.5: reg 0x1c: [io  0x0374-0x0377]
[    0.369997] pci 0000:00:02.5: reg 0x20: [io  0x4000-0x400f]
[    0.370016] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.370068] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.370119] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.370171] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.370247] pci 0000:00:02.5: PME# supported from D3cold
[    0.370375] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[    0.370392] pci 0000:00:03.0: reg 0x10: [mem 0xfdfff000-0xfdffffff]
[    0.370558] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[    0.370575] pci 0000:00:03.1: reg 0x10: [mem 0xfdffe000-0xfdffefff]
[    0.370745] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[    0.370763] pci 0000:00:03.3: reg 0x10: [mem 0xfdffd000-0xfdffdfff]
[    0.370833] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.370959] pci 0000:00:04.0: [1039:0191] type 00 class 0x020000
[    0.370978] pci 0000:00:04.0: reg 0x10: [mem 0xfdffc000-0xfdffc07f]
[    0.370986] pci 0000:00:04.0: reg 0x14: [io  0xfe00-0xfe7f]
[    0.371049] pci 0000:00:04.0: supports D1 D2
[    0.371051] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.371172] pci 0000:00:05.0: [1039:1183] type 00 class 0x010185
[    0.371191] pci 0000:00:05.0: reg 0x10: [io  0xfd00-0xfd07]
[    0.371200] pci 0000:00:05.0: reg 0x14: [io  0xfc00-0xfc03]
[    0.371208] pci 0000:00:05.0: reg 0x18: [io  0xfb00-0xfb07]
[    0.371217] pci 0000:00:05.0: reg 0x1c: [io  0xfa00-0xfa03]
[    0.371226] pci 0000:00:05.0: reg 0x20: [io  0xf900-0xf90f]
[    0.371269] pci 0000:00:05.0: PME# supported from D3cold
[    0.371395] pci 0000:00:06.0: [1039:000a] type 01 class 0x060400
[    0.371434] pci 0000:00:06.0: enabling Extended Tags
[    0.371532] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.371669] pci 0000:00:0d.0: [168c:0029] type 00 class 0x028000
[    0.371689] pci 0000:00:0d.0: reg 0x10: [mem 0xfdfe0000-0xfdfeffff]
[    0.371763] pci 0000:00:0d.0: PME# supported from D0 D3hot
[    0.371895] pci 0000:00:0e.0: [10ec:8139] type 00 class 0x020000
[    0.371914] pci 0000:00:0e.0: reg 0x10: [io  0xf600-0xf6ff]
[    0.371923] pci 0000:00:0e.0: reg 0x14: [mem 0xfdffb000-0xfdffb0ff]
[    0.371962] pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.371990] pci 0000:00:0e.0: supports D1 D2
[    0.371992] pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold
[    0.372109] pci 0000:00:0f.0: [1039:7502] type 00 class 0x040300
[    0.372128] pci 0000:00:0f.0: reg 0x10: [mem 0xfdff4000-0xfdff7fff]
[    0.372198] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[    0.372390] pci 0000:01:00.0: [10de:01df] type 00 class 0x030000
[    0.372409] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.372422] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.372434] pci 0000:01:00.0: reg 0x1c: [mem 0xfb000000-0xfbffffff 64bit]
[    0.372450] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.372557] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.372630] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.372683] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.372687] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfcffffff]
[    0.372692] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.372743] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.372797] pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]
[    0.372800] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.372806] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.372963] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.373123] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.373281] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.373440] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.373599] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.373758] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.373916] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.374074] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.375190] SCSI subsystem initialized
[    0.375190] libata version 3.00 loaded.
[    0.375858] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.375880] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.375943] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.375993] vgaarb: loaded
[    0.376072] ACPI: bus type USB registered
[    0.376140] usbcore: registered new interface driver usbfs
[    0.376202] usbcore: registered new interface driver hub
[    0.376269] usbcore: registered new device driver usb
[    0.376361] pps_core: LinuxPPS API ver. 1 registered
[    0.376410] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.376475] PTP clock support registered
[    0.376544] EDAC MC: Ver: 3.0.0
[    0.376544] PCI: Using ACPI for IRQ routing
[    0.385708] PCI: pci_cache_line_size set to 64 bytes
[    0.385752] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.385754] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[    0.385921] NetLabel: Initializing
[    0.385969] NetLabel:  domain hash size = 128
[    0.386017] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.386088] NetLabel:  unlabeled traffic allowed by default
[    0.386161] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.386161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.386161] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.387847] clocksource: Switched to clocksource tsc-early
[    0.413025] VFS: Disk quotas dquot_6.6.0
[    0.413137] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.413483] AppArmor: AppArmor Filesystem Enabled
[    0.413633] pnp: PnP ACPI init
[    0.414279] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.414330] system 00:00: [io  0x0800-0x0805] has been reserved
[    0.414383] system 00:00: [io  0x0290-0x0297] has been reserved
[    0.414433] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.414490] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.414586] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.414824] pnp 00:02: [dma 2]
[    0.414867] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.415232] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.415601] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.416075] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.416309] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.416365] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.416470] system 00:07: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.416523] system 00:07: [mem 0xfed00000-0xfed000ff] has been reserved
[    0.416575] system 00:07: [mem 0xfed30000-0xfed300ff] has been reserved
[    0.416626] system 00:07: [mem 0x7fff0000-0x7fffffff] could not be reserved
[    0.416678] system 00:07: [mem 0xffff0000-0xffffffff] has been reserved
[    0.416730] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.416782] system 00:07: [mem 0x00100000-0x7ffeffff] could not be reserved
[    0.416834] system 00:07: [mem 0xffee0000-0xffefffff] has been reserved
[    0.416886] system 00:07: [mem 0xfffe0000-0xfffeffff] has been reserved
[    0.416939] system 00:07: [mem 0xfec00000-0xfecfffff] has been reserved
[    0.416990] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.417046] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.417056] pnp: PnP ACPI: found 8 devices
[    0.424102] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.424205] pci 0000:00:0e.0: BAR 6: assigned [mem 0x80000000-0x8000ffff pref]
[    0.424270] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[    0.424332] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.424384] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.424438] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfcffffff]
[    0.424491] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.424558] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.424608] pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]
[    0.424662] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.424716] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.424783] pci_bus 0000:00: resource 4 [io  0x0000-0x047f window]
[    0.424785] pci_bus 0000:00: resource 5 [io  0x0480-0x048f]
[    0.424786] pci_bus 0000:00: resource 6 [io  0x0490-0x0cf7 window]
[    0.424788] pci_bus 0000:00: resource 7 [io  0x0d00-0x0fff window]
[    0.424789] pci_bus 0000:00: resource 8 [io  0x1000-0x10cf]
[    0.424791] pci_bus 0000:00: resource 9 [io  0x1100-0xffff]
[    0.424792] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
[    0.424794] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.424796] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.424797] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[    0.424799] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.424801] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.424802] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.424804] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.424917] NET: Registered protocol family 2
[    0.425319] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.425403] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.425601] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.425892] TCP: Hash tables configured (established 16384 bind 16384)
[    0.426048] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.426134] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.426282] NET: Registered protocol family 1
[    0.426342] NET: Registered protocol family 44
[    0.426763] PCI Interrupt Link [LNKE] enabled at IRQ 11
[    0.426814] PCI: setting IRQ 11 as level-triggered
[    0.459541] pci 0000:00:03.0: quirk_usb_early_handoff+0x0/0x6a0 took 32341 usecs
[    0.459879] PCI Interrupt Link [LNKF] enabled at IRQ 15
[    0.459930] PCI: setting IRQ 15 as level-triggered
[    0.491730] pci 0000:00:03.1: quirk_usb_early_handoff+0x0/0x6a0 took 31347 usecs
[    0.492068] PCI Interrupt Link [LNKG] enabled at IRQ 9
[    0.492119] PCI: setting IRQ 9 as level-triggered
[    0.492313] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.492378] PCI: CLS 64 bytes, default 64
[    0.492464] Unpacking initramfs...
[    9.795326] Freeing initrd memory: 38632K
[    9.796144] check: Scanning for low memory corruption every 60 seconds
[    9.797485] Initialise system trusted keyrings
[    9.797556] Key type blacklist registered
[    9.797824] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    9.800765] zbud: loaded
[    9.801512] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    9.801950] fuse init (API version 7.28)
[    9.850192] Key type asymmetric registered
[    9.850249] Asymmetric key parser 'x509' registered
[    9.850333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    9.850457] io scheduler mq-deadline registered
[    9.850916] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.851076] intel_idle: does not run on family 6 model 15
[    9.851229] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    9.851311] ACPI: Power Button [PWRB]
[    9.851434] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    9.851523] ACPI: Power Button [PWRF]
[    9.852593] thermal LNXTHERM:00: registered as thermal_zone0
[    9.852644] ACPI: Thermal Zone [THRM] (36 C)
[    9.852913] thermal LNXTHERM:01: registered as thermal_zone1
[    9.852963] ACPI: Thermal Zone [SYST] (40 C)
[    9.853217] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    9.873806] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    9.894290] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    9.896764] Linux agpgart interface v0.103
[    9.900689] loop: module loaded
[    9.901098] pata_sis 0000:00:02.5: version 0.5.2
[    9.901525] PCI Interrupt Link [LNKA] enabled at IRQ 5
[    9.901577] PCI: setting IRQ 5 as level-triggered
[    9.902617] scsi host0: pata_sis
[    9.902885] scsi host1: pata_sis
[    9.902999] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[    9.903051] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[    9.903261] libphy: Fixed MDIO Bus: probed
[    9.903310] tun: Universal TUN/TAP device driver, 1.6
[    9.903431] PPP generic driver version 2.4.2
[    9.903552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.903608] ehci-pci: EHCI PCI platform driver
[    9.903898] ehci-pci 0000:00:03.3: EHCI Host Controller
[    9.905323] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[    9.905433] ehci-pci 0000:00:03.3: cache line size of 64 is not supported
[    9.905441] ehci-pci 0000:00:03.3: irq 9, io mem 0xfdffd000
[    9.919847] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    9.920020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    9.920096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.920158] usb usb1: Product: EHCI Host Controller
[    9.920209] usb usb1: Manufacturer: Linux 5.0.0-32-generic ehci_hcd
[    9.920260] usb usb1: SerialNumber: 0000:00:03.3
[    9.920454] hub 1-0:1.0: USB hub found
[    9.920512] hub 1-0:1.0: 8 ports detected
[    9.920824] ehci-platform: EHCI generic platform driver
[    9.920891] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    9.920944] ohci-pci: OHCI PCI platform driver
[    9.921163] ohci-pci 0000:00:03.0: OHCI PCI host controller
[    9.921219] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[    9.921305] ohci-pci 0000:00:03.0: irq 11, io mem 0xfdfff000
[    9.981975] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    9.982039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.982100] usb usb2: Product: OHCI PCI host controller
[    9.982150] usb usb2: Manufacturer: Linux 5.0.0-32-generic ohci_hcd
[    9.982201] usb usb2: SerialNumber: 0000:00:03.0
[    9.982368] hub 2-0:1.0: USB hub found
[    9.982425] hub 2-0:1.0: 4 ports detected
[    9.982797] ohci-pci 0000:00:03.1: OHCI PCI host controller
[    9.982852] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[    9.982930] ohci-pci 0000:00:03.1: irq 15, io mem 0xfdffe000
[   10.041878] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[   10.041942] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.042003] usb usb3: Product: OHCI PCI host controller
[   10.042053] usb usb3: Manufacturer: Linux 5.0.0-32-generic ohci_hcd
[   10.042104] usb usb3: SerialNumber: 0000:00:03.1
[   10.042271] hub 3-0:1.0: USB hub found
[   10.042327] hub 3-0:1.0: 4 ports detected
[   10.042542] ohci-platform: OHCI generic platform driver
[   10.042601] uhci_hcd: USB Universal Host Controller Interface driver
[   10.042732] i8042: PNP: No PS/2 controller found.
[   10.042780] i8042: Probing ports directly.
[   10.043178] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.043232] serio: i8042 AUX port at 0x60,0x64 irq 12
[   10.043437] mousedev: PS/2 mouse device common for all mice
[   10.043668] rtc_cmos 00:01: RTC can wake from S4
[   10.043933] rtc_cmos 00:01: registered as rtc0
[   10.044009] rtc_cmos 00:01: alarms up to one year, 242 bytes nvram, hpet irqs
[   10.044069] i2c /dev entries driver
[   10.044261] device-mapper: uevent: version 1.0.3
[   10.044399] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[   10.044490] platform eisa.0: Probing EISA bus 0
[   10.044542] platform eisa.0: EISA: Cannot allocate resource for mainboard
[   10.044594] platform eisa.0: Cannot allocate resource for EISA slot 1
[   10.044645] platform eisa.0: Cannot allocate resource for EISA slot 2
[   10.044697] platform eisa.0: Cannot allocate resource for EISA slot 3
[   10.044748] platform eisa.0: Cannot allocate resource for EISA slot 4
[   10.044799] platform eisa.0: Cannot allocate resource for EISA slot 5
[   10.044850] platform eisa.0: Cannot allocate resource for EISA slot 6
[   10.044901] platform eisa.0: Cannot allocate resource for EISA slot 7
[   10.044952] platform eisa.0: Cannot allocate resource for EISA slot 8
[   10.045003] platform eisa.0: EISA: Detected 0 cards
[   10.045089] ledtrig-cpu: registered to indicate activity on CPUs
[   10.045502] NET: Registered protocol family 10
[   10.053155] Segment Routing with IPv6
[   10.053245] NET: Registered protocol family 17
[   10.053354] Key type dns_resolver registered
[   10.053681] mce: Using 6 MCE banks
[   10.053759] RAS: Correctable Errors collector initialized.
[   10.053868] microcode: sig=0x6f6, pf=0x1, revision=0xc6
[   10.053967] microcode: Microcode Update Driver: v2.2.
[   10.053988] sched_clock: Marking stable (10043800638, 10160774)->(10059240842, -5279430)
[   10.054334] registered taskstats version 1
[   10.054404] Loading compiled-in X.509 certificates
[   10.056843] Loaded X.509 cert 'Build time autogenerated kernel key: 8248cf0f90a942a6d35391b2654e2baeb494e1df'
[   10.056949] zswap: loaded using pool lzo/zbud
[   10.063777] Key type big_key registered
[   10.063853] Key type trusted registered
[   10.067096] Key type encrypted registered
[   10.067148] AppArmor: AppArmor sha1 policy hashing enabled
[   10.067210] ima: No TPM chip found, activating TPM-bypass!
[   10.067265] ima: Allocated hash algorithm: sha1
[   10.067331] No architecture policies found
[   10.067393] evm: Initialising EVM extended attributes:
[   10.067443] evm: security.selinux
[   10.067489] evm: security.SMACK64
[   10.067536] evm: security.SMACK64EXEC
[   10.067583] evm: security.SMACK64TRANSMUTE
[   10.067631] evm: security.SMACK64MMAP
[   10.067678] evm: security.apparmor
[   10.067724] evm: security.ima
[   10.067770] evm: security.capability
[   10.067829] evm: HMAC attrs: 0x1
[   10.068344]   Magic number: 0:539:873
[   10.068605] rtc_cmos 00:01: setting system clock to 2020-04-21T06:51:17 UTC (1587451877)
[   10.080103] ata1.01: ATAPI: HL-DT-ST DVD-RW_GSA-H41N, RA00, max UDMA/66
[   10.110036] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RW_GSA-H41N  RA00 PQ: 0 ANSI: 5
[   10.171488] sr 0:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   10.171555] cdrom: Uniform CD-ROM driver Revision: 3.20
[   10.171930] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   10.172009] sr 0:0:1:0: Attached scsi generic sg0 type 5
[   10.172158] ata2: port disabled--ignoring
[   10.174782] Freeing unused decrypted memory: 2040K
[   10.176675] Freeing unused kernel image memory: 2588K
[   10.187904] Write protecting the kernel read-only data: 22528k
[   10.190003] Freeing unused kernel image memory: 2016K
[   10.191791] Freeing unused kernel image memory: 1736K
[   10.208231] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   10.208298] x86/mm: Checking user space page tables
[   10.224362] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   10.224422] Run /init as init process
[   10.345562] hpet1: lost 17 rtc interrupts
[   10.358911] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
[   10.359985] PCI Interrupt Link [LNKB] enabled at IRQ 15
[   10.362433] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   10.362490] 8139cp 0000:00:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   10.364695] PCI Interrupt Link [LNKD] enabled at IRQ 11
[   10.364789] sis190: 0000:00:04.0: Read MAC address from EEPROM
[   10.364840] sis190: 0000:00:04.0: Error EEPROM read 0
[   10.364890] sis190: 0000:00:04.0: Read MAC address from APC
[   10.365084] sata_sis 0000:00:05.0: version 1.0
[   10.365236] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[   10.367882] FDC 0 is a post-1991 82077
[   10.371932] scsi host2: sata_sis
[   10.372666] scsi host3: sata_sis
[   10.372781] ata3: PATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xf900 irq 15
[   10.372835] ata4: PATA max UDMA/133 cmd 0xfb00 ctl 0xfa00 bmdma 0xf908 irq 15
[   10.388667] 8139too: 8139too Fast Ethernet driver 0.9.28
[   10.392400] PCI Interrupt Link [LNKC] enabled at IRQ 10
[   10.392455] PCI: setting IRQ 10 as level-triggered
[   10.393036] 8139too 0000:00:0e.0 eth0: RealTek RTL8139 at 0x(____ptrval____), 00:05:1c:21:1f:f1, IRQ 10
[   10.434096] 8139too 0000:00:0e.0 enp0s14: renamed from eth0
[   10.435915] sis190: 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1
[   10.515878] usb 2-1: new low-speed USB device number 2 using ohci-pci
[   10.538316] ata3.00: ATA-9: SAMSUNG MZAPF032HCFV-000H1, FXM21H2Q, max UDMA/133
[   10.538390] ata3.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   10.541985] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG MZAPF032 1H2Q PQ: 0 ANSI: 5
[   10.542427] sd 2:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[   10.542432] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   10.542504] sd 2:0:0:0: [sda] Write Protect is off
[   10.542594] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   10.542623] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   10.543309]  sda: sda1 sda2
[   10.544017] sd 2:0:0:0: [sda] Attached SCSI disk
[   10.757900] usb 2-1: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
[   10.757974] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[   10.758030] usb 2-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[   10.758084] usb 2-1: Manufacturer: Microsoft
[   10.765738] hidraw: raw HID events driver (C) Jiri Kosina
[   10.774258] usbcore: registered new interface driver usbhid
[   10.774311] usbhid: USB HID core driver
[   10.776966] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:045E:0040.0001/input/input5
[   10.777192] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:03.0-1/input0
[   10.811851] tsc: Refined TSC clocksource calibration: 2400.084 MHz
[   10.811911] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229886f1f14, max_idle_ns: 440795306808 ns
[   10.811999] clocksource: Switched to clocksource tsc
[   11.227848] sis190: 0000:00:04.0: Using transceiver at address 1 as default
[   11.276157] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at (____ptrval____) (IRQ: 11), 00:1c:25:28:53:9d
[   11.277592] sis190 0000:00:04.0 eth0: RGMII mode.
[   11.277644] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
[   11.291850] usb 3-1: new low-speed USB device number 2 using ohci-pci
[   11.324899] sis190 0000:00:04.0 enp0s4: renamed from eth0
[   11.517951] usb 3-1: New USB device found, idVendor=04f3, idProduct=0103, bcdDevice= 1.05
[   11.518019] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.529505] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/0003:04F3:0103.0002/input/input6
[   11.529658] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:03.1-1/input0
[   11.537559] input: HID 04f3:0103 Consumer Control as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/0003:04F3:0103.0003/input/input7
[   11.537706] input: HID 04f3:0103 System Control as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/0003:04F3:0103.0003/input/input8
[   11.537848] hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:03.1-1/input1
[   13.207422] random: fast init done
[   13.225929] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[   13.226015] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[   13.226074] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[   13.226778] ISO 9660 Extensions: Microsoft Joliet Level 3
[   13.230872] ISO 9660 Extensions: RRIP_1991A
[   19.191573] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   19.207931] systemd[1]: Detected architecture x86-64.
[   19.212365] systemd[1]: Set hostname to <mint>.
[   19.371780] systemd[1]: Unnecessary job for /dev/loop0 was removed.
[   19.372271] systemd[1]: Reached target Remote File Systems.
[   19.373034] systemd[1]: Created slice User and Session Slice.
[   19.373358] systemd[1]: Reached target User and Group Name Lookups.
[   19.373683] systemd[1]: Reached target System Time Synchronized.
[   19.374061] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   19.374396] systemd[1]: Reached target Swap.
[   19.505611] lp: driver loaded but no devices found
[   19.530369] ppdev: user-space parallel port driver
[   19.535743] parport_pc 00:05: reported by Plug and Play ACPI
[   19.535958] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   19.632083] lp0: using parport0 (interrupt-driven).
[   19.728478] systemd-journald[805]: Received request to flush runtime journal from PID 1
[   20.707962] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   20.770416] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   21.637494] coretemp coretemp.0: Using relative temperature scale!
[   21.781035] coretemp coretemp.0: Using relative temperature scale!
[   21.790676] intel_powerclamp: No package C-state available
[   21.861715] intel_powerclamp: No package C-state available
[   23.971960] ath: EEPROM regdomain: 0x809c
[   23.971962] ath: EEPROM indicates we should expect a country code
[   23.971964] ath: doing EEPROM country->regdmn map search
[   23.971965] ath: country maps to regdmn code: 0x52
[   23.971966] ath: Country alpha2 being used: CN
[   23.971967] ath: Regpair used: 0x52
[   24.089309] snd_hda_intel 0000:00:0f.0: CORB reset timeout#1, CORBRP = 0
[   24.111446] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   24.112543] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffb15540940000, irq=15
[   24.145159] 8139too 0000:00:0e.0 enp0s14: link down
[   24.167415] ath9k 0000:00:0d.0 wlp0s13: renamed from wlan0
[   24.213328] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC883: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   24.213340] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   24.213342] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   24.213343] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   24.213345] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   24.213346] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   24.213348] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   24.213351] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   24.213352] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   24.213354] snd_hda_codec_realtek hdaudioC0D0:      Aux=0x1c
[   24.297443] input: HDA SIS966 Rear Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input9
[   24.297563] input: HDA SIS966 Line as /devices/pci0000:00/0000:00:0f.0/sound/card0/input10
[   24.297646] input: HDA SIS966 Line Out Front as /devices/pci0000:00/0000:00:0f.0/sound/card0/input11
[   24.297731] input: HDA SIS966 Line Out Surround as /devices/pci0000:00/0000:00:0f.0/sound/card0/input12
[   24.297817] input: HDA SIS966 Line Out CLFE as /devices/pci0000:00/0000:00:0f.0/sound/card0/input13
[   24.297895] input: HDA SIS966 Line Out Side as /devices/pci0000:00/0000:00:0f.0/sound/card0/input14
[   34.275890] sis190 0000:00:04.0 enp0s4: auto-negotiating...
[   41.543956] random: crng init done
[   41.543961] random: 7 urandom warning(s) missed due to ratelimiting
[   43.297647] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[   89.644219] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[   89.661265] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[   89.663004] wlp0s13: authenticated
[   89.667878] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[   89.671584] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=5)
[   89.671747] wlp0s13: associated
[   89.752000] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s13: link becomes ready
[   94.139153] perf: interrupt took too long (3170 > 3127), lowering kernel.perf_event_max_sample_rate to 63000
[  123.469841] perf: interrupt took too long (3971 > 3962), lowering kernel.perf_event_max_sample_rate to 50250
[  172.058722] perf: interrupt took too long (4973 > 4963), lowering kernel.perf_event_max_sample_rate to 40000
[  243.023432] perf: interrupt took too long (6219 > 6216), lowering kernel.perf_event_max_sample_rate to 32000
[  533.332443] perf: interrupt took too long (7849 > 7773), lowering kernel.perf_event_max_sample_rate to 25250
[ 1241.385363] perf: interrupt took too long (9816 > 9811), lowering kernel.perf_event_max_sample_rate to 20250
[ 2081.491056] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.432 msecs
[ 5011.633614] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[ 5011.658028] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[ 5011.660151] wlp0s13: authenticated
[ 5011.695963] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[ 5011.699660] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=4)
[ 5011.699879] wlp0s13: associated
[ 6491.985682] wlp0s13: deauthenticated from 10:c3:7b:d4:40:ac (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[ 6492.124897] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[ 6492.147954] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[ 6492.149681] wlp0s13: authenticated
[ 6492.156197] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[ 6492.159864] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=4)
[ 6492.160060] wlp0s13: associated
[ 6551.983765] wlp0s13: deauthenticated from 10:c3:7b:d4:40:ac (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[ 6552.120250] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[ 6552.147486] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[ 6552.150128] wlp0s13: authenticated
[ 6552.151556] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[ 6552.155866] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=4)
[ 6552.156031] wlp0s13: associated
[ 6631.579473] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[ 6631.595613] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[ 6631.602442] wlp0s13: authenticated
[ 6631.610416] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[ 6631.614944] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=4)
[ 6631.615129] wlp0s13: associated
[ 6929.499616] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[ 6929.517670] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[ 6929.520531] wlp0s13: authenticated
[ 6929.531087] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[ 6929.534782] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=4)
[ 6929.534966] wlp0s13: associated
[ 8538.967396] wlp0s13: deauthenticated from 10:c3:7b:d4:40:ac (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[ 8539.116369] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[ 8539.135683] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[ 8539.137442] wlp0s13: authenticated
[ 8539.152218] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[ 8539.156405] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=4)
[ 8539.156611] wlp0s13: associated
[ 8977.938099] wlp0s13: deauthenticated from 10:c3:7b:d4:40:ac (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[ 8978.037417] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[ 8978.056658] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[ 8978.061957] wlp0s13: authenticated
[ 8978.085592] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[ 8978.089402] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=1)
[ 8978.089633] wlp0s13: associated
[ 9775.481742] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[ 9775.512685] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[ 9775.515572] wlp0s13: authenticated
[ 9775.548490] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[ 9775.553782] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=1)
[ 9775.553941] wlp0s13: associated
[ 9897.725714] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 2.390 msecs
[ 9897.725718] perf: interrupt took too long (27655 > 12270), lowering kernel.perf_event_max_sample_rate to 7000
[15164.855388] wlp0s13: deauthenticated from 10:c3:7b:d4:40:ac (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[15164.992880] wlp0s13: authenticate with 10:c3:7b:d4:40:ac
[15165.008703] wlp0s13: send auth to 10:c3:7b:d4:40:ac (try 1/3)
[15165.010432] wlp0s13: authenticated
[15165.012781] wlp0s13: associate with 10:c3:7b:d4:40:ac (try 1/3)
[15165.016382] wlp0s13: RX AssocResp from 10:c3:7b:d4:40:ac (capab=0x411 status=0 aid=1)
[15165.016597] wlp0s13: associated
[24877.876676] INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.409 msecs
[28455.614746] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 3.188 msecs
[33614.934654] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 3.516 msecs
[33614.934657] perf: interrupt took too long (36439 > 34568), lowering kernel.perf_event_max_sample_rate to 5250
[47946.680615] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 3.677 msecs
[65276.534383] INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 3.163 msecs
Naposledy upravil(a) etis dne 22 dub 2020, 18:14, celkem upraveno 1 x.

Uživatelský avatar
Ventero1
Příspěvky: 2763
Registrován: 31 říj 2016, 14:17
Bydliště: Sokolov, Olomouc

Re: SIS chipset

#5 Příspěvek od Ventero1 »

Tak jo - zase nekdo, kdo si asi nic neprecetl o tom, jak fungovat na foru. Takze prosim uprav svuj prispevek a veskery vypis dej do tzv. kodu. Je na to ikona, kdyz se prepnes do pokrocilejsiho rezimu editace.
Zvuky jsou mantrami a myšlenky moudrostí, prostě proto, že se mohou objevovat ...

menom
Příspěvky: 2757
Registrován: 12 pro 2012, 15:10

Re: SIS chipset

#6 Příspěvek od menom »

.

Ano mohol si dat ten vypis do code (vlozit ako kod)

Ked takto to funguje, tak staci to nainstalovat a nasledne upravit v instalovanom systeme subor grub v ceste /etc/default/

Kód: Vybrat vše

/etc/default/grub

Tam byva podobny riadok
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
a upravit na
GRUB_CMDLINE_LINUX_DEFAULT="quiet xforcevesa nomodeset"
ulozit
Aktualizovat nastavenie grubu zadanim prikazu do terminalu:

Kód: Vybrat vše

sudo update-grub
Nasledne restart.

.
.

etis
Příspěvky: 5
Registrován: 21 dub 2020, 15:22

Re: SIS chipset

#7 Příspěvek od etis »

Môžem to skúsiť nainštalovať a potom z LIVE to nájsť a upraviť.... Dám vedieť...
Tak dnes PC "odišiel", takže som ho musel nahradiť. AK by som ho zas "oživil" skúsim....
Ďakujem

Zamčeno