Linux Mint 20.3-upgrade na Linux Mint 21

Problémy s instalací nebo spouštěním systému Linux Mint
Zpráva
Autor
Uživatelský avatar
Robius
Příspěvky: 8
Registrován: 15 srp 2022, 18:59
Bydliště: Brno

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#41 Příspěvek od Robius »

OK, zkusím nastavit. Teď jsem na dovolené. Tak na to pak zkusím juknout. 20.8. nebo 21.8. Problém byl v tom, že když ta instalačka nabízela ty svý možnosti, tak to nevyhodilo, žádnou negativní hlášku. Když jsem disk rozděloval podle sebe nebo podle nějakých návodů tak to vždycky, vypsalo něco nějaký blábol. A díky tomu se to asi nechce rozjet. Jinak o tom EFI, jsem neměl představu k čemu je. V tom logu jsem si toho gtp taky všimnul. Ale nedávalo mi to smysl. Jen, mi přijde divné, že když jsem si to upravoval sám, tak tam povinně musel být na začátku disku volný 1 MB. Ale když si to vytvořila sama ta instalačka, tak tam ten 1 MB nebyl.

pepestar
Příspěvky: 185
Registrován: 07 lis 2016, 21:47

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#42 Příspěvek od pepestar »

alfisko píše: 17 srp 2022, 18:42 Pepestar:To je ale tvrdenie podmienene urovnou znalosti. Takze si dovolim nesuhlasit.
s týmto musím súhlasiť a každý inak inštaluje soft. Ja radšej vymažem celý disk a dám čistú inštaláciu,pretože aj tak používam len jednu distribúciu Linuxu naraz. Údaje predtým zálohujem a po inštalácii si ich tam nahrám. Niekto zase delí disk a požíva aj priečinok /home. Ako kto. Ja používam túto možnosť. Vymazať celý disk čím sa vymažú všetky údaje, nainštalujem Linux a potom nahrám zálohované údaje. Pri viacerých distribúciách alebo dualboote s Windowsom sa to použiť nedá, pretože sa všetko vymazáva z PC

Uživatelský avatar
Robius
Příspěvky: 8
Registrován: 15 srp 2022, 18:59
Bydliště: Brno

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#43 Příspěvek od Robius »

Takže jsem v sobotu opět laboroval a zkoušel jsem instalovat Linux Mint 21 Mate, samozřejmě taky bezúspěšně. Nic méně jsem zajel za mou matkou, které jsem taky nainstaloval Linux Mint. V současné době má Linux Mint 20.3. Mate. Taky na starý PC. Koukal jsem se do nastavení rozložení disku i grub.cfg, taktéž jsem si nechal udělat log z Boot Repair.

Obrázek

Je to HDD, který je též MBR. Log z Boot Repair:

Kód: Vybrat vše

boot-repair-4ppa130                                              [20220821_1544]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos6)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => libparted MBR boot code is installed in the MBR of /dev/sdf.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 10
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 20.3
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdf1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        


================================ 2 OS detected =================================

OS#1:   OS je v tuto chvíli používán - Linux Mint 20.3 CurrentSession on sda6
OS#2:   Windows 10 on sda1

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-124-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro quiet splash


===================================== UEFI =====================================

This installed-session is not in EFI-mode.



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdf	: notGPT,	no-BIOSboot,	has-noESP, 	usb-disk,	not-mmc, no-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda6	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda1	: is-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda2	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda3	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda5	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdf1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far

Partitions info (2/3): _________________________________________________________

sda6	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda1	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot
sda2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda3	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda5	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdf1	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda6	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda1	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda2	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda3	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda5	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sdf1	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdf

fdisk -l (filtered): ___________________________________________________________

Disk sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0x341bb72d
      Boot     Start       End   Sectors   Size Id Type
sda1  *         2048 203880447 203878400  97.2G  7 HPFS/NTFS/exFAT
sda2       203880448 204802047    921600   450M 27 Hidden NTFS WinRE
sda3       204802048 796778294 591976247 282.3G  7 HPFS/NTFS/exFAT
sda4       796778494 976771071 179992578  85.8G  5 Extended
sda5       796778496 797829119   1050624   513M  b W95 FAT32
sda6       797831168 976771071 178939904  85.3G 83 Linux
Disk sdf: 3.74 GiB, 4001366016 bytes, 7815168 sectors
Disk identifier: 0xa2b53993
      Boot Start     End Sectors  Size Id Type
sdf1        2048 7815167 7813120  3.7G  c W95 FAT32 (LBA)

parted -lm (filtered): _________________________________________________________

sda:500GB:scsi:512:512:msdos:ATA ST3500630AS:;
1:1049kB:104GB:104GB:ntfs::boot;
2:104GB:105GB:472MB:ntfs::msftres;
3:105GB:408GB:303GB:ntfs::;
4:408GB:500GB:92.2GB:::;
5:408GB:408GB:538MB:fat32::;
6:408GB:500GB:91.6GB:ext4::;
sdf:4001MB:scsi:512:512:msdos:Kingston DT 101 II:;
1:1049kB:4001MB:4000MB:fat32::lba;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE UUID                                 PARTUUID                             LABEL PARTLABEL
sda                                                                                           
├─sda1 ntfs   EACC8337CC82FD57                     341bb72d-01                                
├─sda2 ntfs   9CB89E69B89E41A6                     341bb72d-02                                
├─sda3 ntfs   04B4C82AB4C81FD2                     341bb72d-03                                
├─sda4                                             341bb72d-04                                
├─sda5 vfat   34A2-E52C                            341bb72d-05                                
└─sda6 ext4   8348b146-58e9-42d1-846e-2e1b92b06b4a 341bb72d-06                                
sdf                                                                                           
└─sdf1 vfat   CE07-CC61                            a2b53993-01                                

df (filtered): _________________________________________________________________

        Avail Use% Mounted on
sda1    30.3G  69% /mnt/boot-sav/sda1
sda2   109.1M  76% /mnt/boot-sav/sda2
sda3    80.9G  71% /mnt/boot-sav/sda3
sda5     512M   0% /mnt/boot-sav/sda5
sda6    40.9G  46% /
sda6    40.9G  46% /run/timeshift/backup
sdf1     3.6G   4% /media/zdenka/CE07-CC61

Mount options: __________________________________________________________________

sda1   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda2   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda3   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda5   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sda6   rw,relatime,errors=remount-ro
sda6   rw,relatime,errors=remount-ro
sdf1   rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro

====================== sda6/boot/grub/grub.cfg (filtered) ======================

Linux Mint 20.3 MATE   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-124-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-122-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-120-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-113-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-109-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-107-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-100-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-97-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-96-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-92-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-91-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-90-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-74-generic   8348b146-58e9-42d1-846e-2e1b92b06b4a
Windows 10 (on sda1)   EACC8337CC82FD57
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda6/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda5 during installation
UUID=34A2-E52C  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0

======================= sda6/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda6: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 436.921901703 = 469.141319680  boot/grub/grub.cfg                             1
 462.788909912 = 496.915808256  boot/grub/i386-pc/core.img                     1
 427.627956390 = 459.162021888  boot/vmlinuz                                   1
 398.979518890 = 428.400996352  boot/vmlinuz.old                               1
 439.643585205 = 472.063705088  boot/vmlinuz-5.4.0-100-generic                 1
 403.213897705 = 432.947625984  boot/vmlinuz-5.4.0-107-generic                 1
 417.276401520 = 448.047124480  boot/vmlinuz-5.4.0-109-generic                 1
 413.909214020 = 444.431634432  boot/vmlinuz-5.4.0-113-generic                 1
 390.229530334 = 419.005767680  boot/vmlinuz-5.4.0-120-generic                 1
 398.979518890 = 428.400996352  boot/vmlinuz-5.4.0-122-generic                 1
 427.627956390 = 459.162021888  boot/vmlinuz-5.4.0-124-generic                 1
 384.951168060 = 413.338169344  boot/vmlinuz-5.4.0-74-generic                  2
 387.852767944 = 416.453738496  boot/vmlinuz-5.4.0-90-generic                  1
 396.251209259 = 425.471496192  boot/vmlinuz-5.4.0-91-generic                  1
 404.362327576 = 434.180743168  boot/vmlinuz-5.4.0-92-generic                  1
 465.245140076 = 499.553165312  boot/vmlinuz-5.4.0-96-generic                  1
 389.802730560 = 418.547494912  boot/vmlinuz-5.4.0-97-generic                  2
 425.964317322 = 457.375703040  boot/initrd.img                                3
 419.565879822 = 450.505433088  boot/initrd.img.old                            2
 419.979946136 = 450.950033408  boot/initrd.img-5.4.0-100-generic              1
 419.894008636 = 450.857758720  boot/initrd.img-5.4.0-107-generic              2
 419.815883636 = 450.773872640  boot/initrd.img-5.4.0-109-generic              2
 419.722133636 = 450.673209344  boot/initrd.img-5.4.0-113-generic              1
 419.636199951 = 450.580938752  boot/initrd.img-5.4.0-120-generic              2
 419.565879822 = 450.505433088  boot/initrd.img-5.4.0-122-generic              2
 425.964317322 = 457.375703040  boot/initrd.img-5.4.0-124-generic              3
 420.940864563 = 451.981811712  boot/initrd.img-5.4.0-74-generic               3
 420.409626007 = 451.411398656  boot/initrd.img-5.4.0-90-generic               1
 420.323688507 = 451.319123968  boot/initrd.img-5.4.0-91-generic               1
 420.237751007 = 451.226849280  boot/initrd.img-5.4.0-92-generic               1
 420.151813507 = 451.134574592  boot/initrd.img-5.4.0-96-generic               1
 420.065879822 = 451.042304000  boot/initrd.img-5.4.0-97-generic               1

===================== sda6: ls -l /etc/grub.d/ (filtered) ======================

celkem 132
-rwxr-xr-x 1 root root 18224 led 11  2022 10_linux
-rwxr-xr-x 1 root root 42359 kvě 20  2021 10_linux_zfs
-rwxr-xr-x 1 root root 12894 kvě 20  2021 20_linux_xen
-rwxr-xr-x 1 root root 12059 kvě 20  2021 30_os-prober
-rwxr-xr-x 1 root root  1424 kvě 20  2021 30_uefi-firmware
-rwxr-xr-x 1 root root   700 úno 21 04:06 35_fwupd
-rwxr-xr-x 1 root root   214 kvě 20  2021 40_custom
-rwxr-xr-x 1 root root   216 kvě 20  2021 41_custom

=========================== sda6/etc/grub.d/35_fwupd ===========================

#! /bin/sh
# SPDX-License-Identifier: LGPL-2.1+
set -e
[ -d ${pkgdatadir:?} ]
# shellcheck source=/dev/null
. "$pkgdatadir/grub-mkconfig_lib"
if [ -f /var/lib/fwupd/uefi_capsule.conf ] &&
   ls /sys/firmware/efi/efivars/fwupd-*-0abba7dc-e516-4167-bbf5-4d9d1c739416 1>/dev/null 2>&1; then
      . /var/lib/fwupd/uefi_capsule.conf
      if [ "${EFI_PATH}" != "" ] && [ "${ESP}" != "" ]; then
      echo "Adding Linux Firmware Updater entry" >&2
cat << EOF
menuentry 'Linux Firmware Updater' \$menuentry_id_option 'fwupd' {
EOF
      ${grub_probe:?}
      prepare_grub_to_access_device '`${grub_probe} --target=device \${ESP}` | sed -e "s/^/\t/"'
cat << EOF
	chainloader ${EFI_PATH}
}
EOF
      fi
fi


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on sda4

00000000  24 88 2c c6 4e 44 77 9f  a6 99 a9 ad 0f 1b 49 e4  |$.,.NDw.......I.|
00000010  0b 2d f8 d9 43 66 a4 b0  15 c0 f5 04 09 ed df 59  |.-..Cf.........Y|
00000020  f5 71 af 33 56 b7 83 01  9c 5d 61 6b 14 f5 43 ba  |.q.3V....]ak..C.|
00000030  63 32 4e 70 06 35 9e cb  e1 07 27 c3 52 e4 d8 f4  |c2Np.5....'.R...|
00000040  33 28 06 1d 8c c0 5c 7e  1a dc fe ca 97 c4 3b 8d  |3(....\~......;.|
00000050  e0 b8 bc 6b 16 f5 2b b6  30 70 04 12 7b 1f c7 52  |...k..+.0p..{..R|
00000060  ff 00 65 a4 f1 23 e8 a9  f8 0f c6 96 05 ad 60 fc  |..e..#........`.|
00000070  85 7a 7b 47 a9 c6 b9 7d  6c 17 f9 2a 2a 35 ed 18  |.z{G...}l..**5..|
00000080  6c 24 00 64 c6 41 3f f5  d6 a7 9a 74 91 bc d7 1c  |l$.d.A?....t....|
00000090  2f c9 5d 7b 6a 65 95 60  60 8f a7 ff 00 2f 4d 5f  |/.]{je.``..../M_|
000000a0  f3 a9 d2 7b 7f b8 a9 4a  e6 ba a3 7c 28 68 e8 d8  |...{...J...|(h..|
000000b0  92 7f 23 ab 3f a9 3b 67  dd e7 2e b0 82 2b 60 08  |..#.?.;g.....+`.|
000000c0  00 00 60 8f 49 f4 ed 19  d6 a7 f5 c6 6f b2 1b 9f  |..`.I.......o...|
000000d0  cc b2 a1 b4 9d 88 48 54  e8 a7 26 72 3b c0 ef ab  |......HT..&r;...|
000000e0  cc 4e a9 45 b9 97 58 a1  77 15 55 25 ad 27 f5 1e  |.N.E..X.w.U%.'..|
000000f0  b1 f8 7d f5 7e 25 d6 71  b3 c8 17 fd bd 1b 8b 58  |..}.~%.q.......X|
00000100  e3 25 49 12 30 c0 91 98  23 5b f9 3e b1 b5 f4 55  |.%I.0...#[.>...U|
00000110  f8 9f 20 28 f6 81 59 32  08 50 0e d1 dd 60 e7 bf  |.. (..Y2.P...`..|
00000120  d3 5c ef b9 ae 9c dc 2b  8d e0 6f 86 1c 8e 45 96  |.\.....+..o...E.|
00000130  b0 05 1d 0b 42 c9 e9 31  db 4b fd 90 9e 4f ab fb  |....B..1.K...O..|
00000140  5b c7 16 df 68 66 92 45  a2 c6 dc b9 ff 00 c5 7b  |[...hf.E.......{|
00000150  01 3a 5f ee a7 f9 c5 d5  f8 8f 1e bb 54 d0 9b d5  |.:_.........T...|
00000160  02 88 89 58 33 19 e8 0e  b3 7d d5 e6 2c dd c1 a0  |...X3....}..,...|
00000170  aa b2 87 56 20 99 1d 42  0f a7 40 35 9f b5 7e 28  |...V ..B..@5..~(|
00000180  1c ea 2e 71 f1 a0 87 0a  b5 8e b9 18 11 1a 73 4d  |...q..........sM|
00000190  17 25 aa b7 6b 23 11 63  58 55 47 f3 7b 60 93 3d  |.%..k#.cXUG.{`.=|
000001a0  ce 7a 4e 90 67 9e 65 82  5d 48 42 77 02 5c e1 b7  |.zN.g.e.]HBw.\..|
000001b0  48 ea 7a fd f5 bc 67 41  57 3e 40 65 62 8e 00 fe  |H.z...gAW>@eb...|
000001c0  ff ff 0b fe ff ff 02 00  00 00 00 08 10 00 00 fe  |................|
000001d0  ff ff 05 fe ff ff 02 08  10 00 00 70 aa 0a 00 00  |...........p....|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


========= Devices which don't seem to have a corresponding hard drive ==========

sdb sdc sdd sde 

=============================== StdErr Messages ================================

File descriptor 63 (pipe:[506240]) leaked on lvs invocation. Parent PID 22808: /bin/bash
  /dev/sdb: open failed: Médium nebylo nalezeno
  /dev/sdc: open failed: Médium nebylo nalezeno
  /dev/sdd: open failed: Médium nebylo nalezeno
  /dev/sde: open failed: Médium nebylo nalezeno
  /dev/sdb: open failed: Médium nebylo nalezeno
  /dev/sdc: open failed: Médium nebylo nalezeno
  /dev/sdd: open failed: Médium nebylo nalezeno
  /dev/sde: open failed: Médium nebylo nalezeno

Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub2 of
sda6 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s      

Final advice in case of suggested repair: ______________________________________


Please do not forget to make your BIOS boot on sda (ATA ST3500630AS) disk!
A ještě tu mám něco z grub.cfg:

Kód: Vybrat vše

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${initrdfail}" = 2 ]; then
   set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
   set next_entry="${prev_entry}"
   set prev_entry=
   save_env prev_entry
   if [ "${next_entry}" ]; then
      set initrdfail=2
   fi
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function initrdfail {
    if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
      if [ -z "${initrdfail}" ]; then
        set initrdfail=1
        if [ -n "${boot_once}" ]; then
          set prev_entry="${default}"
          save_env prev_entry
        fi
      fi
      save_env initrdfail
    fi; fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
else
  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=cs_CZ
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if [ ${grub_platform} != pc ]; then
      set linux_gfx_mode=keep
    elif hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Linux Mint 20.3 MATE' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
	else
	  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
	fi
	linux	/boot/vmlinuz-5.4.0-124-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
	initrd	/boot/initrd.img-5.4.0-124-generic
}
submenu 'Advanced options for Linux Mint 20.3 MATE' $menuentry_id_option 'gnulinux-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-124-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-124-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-124-generic ...'
		linux	/boot/vmlinuz-5.4.0-124-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-124-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-124-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-124-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-124-generic ...'
		linux	/boot/vmlinuz-5.4.0-124-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-124-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-122-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-122-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-122-generic ...'
		linux	/boot/vmlinuz-5.4.0-122-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-122-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-122-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-122-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-122-generic ...'
		linux	/boot/vmlinuz-5.4.0-122-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-122-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-120-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-120-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-120-generic ...'
		linux	/boot/vmlinuz-5.4.0-120-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-120-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-120-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-120-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-120-generic ...'
		linux	/boot/vmlinuz-5.4.0-120-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-120-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-113-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-113-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-113-generic ...'
		linux	/boot/vmlinuz-5.4.0-113-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-113-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-113-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-113-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-113-generic ...'
		linux	/boot/vmlinuz-5.4.0-113-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-113-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-109-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-109-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-109-generic ...'
		linux	/boot/vmlinuz-5.4.0-109-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-109-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-109-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-109-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-109-generic ...'
		linux	/boot/vmlinuz-5.4.0-109-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-109-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-107-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-107-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-107-generic ...'
		linux	/boot/vmlinuz-5.4.0-107-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-107-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-107-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-107-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-107-generic ...'
		linux	/boot/vmlinuz-5.4.0-107-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-107-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-100-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-100-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-100-generic ...'
		linux	/boot/vmlinuz-5.4.0-100-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-100-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-100-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-100-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-100-generic ...'
		linux	/boot/vmlinuz-5.4.0-100-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-100-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-97-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-97-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-97-generic ...'
		linux	/boot/vmlinuz-5.4.0-97-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-97-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-97-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-97-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-97-generic ...'
		linux	/boot/vmlinuz-5.4.0-97-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-97-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-96-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-96-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-96-generic ...'
		linux	/boot/vmlinuz-5.4.0-96-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-96-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-96-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-96-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-96-generic ...'
		linux	/boot/vmlinuz-5.4.0-96-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-96-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-92-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-92-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-92-generic ...'
		linux	/boot/vmlinuz-5.4.0-92-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-92-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-92-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-92-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-92-generic ...'
		linux	/boot/vmlinuz-5.4.0-92-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-92-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-91-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-91-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-91-generic ...'
		linux	/boot/vmlinuz-5.4.0-91-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-91-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-91-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-91-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-91-generic ...'
		linux	/boot/vmlinuz-5.4.0-91-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-91-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-90-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-90-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-90-generic ...'
		linux	/boot/vmlinuz-5.4.0-90-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-90-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-90-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-90-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-90-generic ...'
		linux	/boot/vmlinuz-5.4.0-90-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-90-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-74-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-74-generic-advanced-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-74-generic ...'
		linux	/boot/vmlinuz-5.4.0-74-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro  quiet splash 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-74-generic
	}
	menuentry 'Linux Mint 20.3 MATE, with Linux 5.4.0-74-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-74-generic-recovery-8348b146-58e9-42d1-846e-2e1b92b06b4a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  8348b146-58e9-42d1-846e-2e1b92b06b4a
		else
		  search --no-floppy --fs-uuid --set=root 8348b146-58e9-42d1-846e-2e1b92b06b4a
		fi
		echo	'Loading Linux 5.4.0-74-generic ...'
		linux	/boot/vmlinuz-5.4.0-74-generic root=UUID=8348b146-58e9-42d1-846e-2e1b92b06b4a ro recovery nomodeset dis_ucode_ldr 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-5.4.0-74-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_linux_zfs ###
### END /etc/grub.d/10_linux_zfs ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 10 (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-EACC8337CC82FD57' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  EACC8337CC82FD57
	else
	  search --no-floppy --fs-uuid --set=root EACC8337CC82FD57
	fi
	parttool ${root} hidden-
	drivemap -s (hd0) ${root}
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/35_fwupd ###
### END /etc/grub.d/35_fwupd ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
Připomínám, že viz výše, je uveden funkční PC. Je nějaká šance nějak využít tyto informace pro notebok (viz minulé příspěvky) :?:
Jo a něco jako formátovat disk v GParted do msdos se mi nepodařilo, nebo jsem tam takovou možnost vůbec neviděl.
Naposledy upravil(a) Robius dne 22 srp 2022, 17:28, celkem upraveno 1 x.

Uživatelský avatar
Ventero1
Příspěvky: 2470
Registrován: 31 říj 2016, 14:17
Bydliště: Sokolov, Olomouc

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#44 Příspěvek od Ventero1 »

Sakra chlape už taky dopr~ - ty výpisy se dávají do kódu a ne do citace! Oprav to prosím.
Zvuky jsou mantrami a myšlenky moudrostí, prostě proto, že se mohou objevovat ...

menom
Příspěvky: 2488
Registrován: 12 pro 2012, 15:10

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#45 Příspěvek od menom »

.

Veru, lepsie sa to cita a zabera menej miesta, staci opravit znacky na code aby to vypadalo okolo textu na zaciatku a na konci takto:
code.png
code.png (2.73 KiB) Zobrazeno 577 x

A na buduce je to tlacitko hned vedla:
tagcode.png
tagcode.png (17.67 KiB) Zobrazeno 577 x

.
Robius píše:výše, je uveden funkční PC

Kód: Vybrat vše

Linux Mint 20.3 MATE 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-124-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-122-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-120-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-113-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-109-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-107-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-100-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-97-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-96-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-92-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-91-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-90-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Linux Mint 20.3 MATE, with Linux 5.4.0-74-generic 8348b146-58e9-42d1-846e-2e1b92b06b4a
Je tam nejak vela kernelov - jadier, nabuduce ich mozno odstranit v Spravcovi aktualizacii a nechat tak 2 az 3 .....
.
Robius píše:Jo a něco jako formátovat disk v GParted do msdos se mi nepodařilo, nebo jsem tam takovou možnost vůbec neviděl.

Tak mrkni znova na to:
GParted-table.png
GParted-table.png (8.53 KiB) Zobrazeno 577 x

Nie formatovat ale vytvorit novu tabulku rozdelenia disku, tam zvolit dos alebo msdos byva oznacena.
Dalej stlacit tlacitko Pouzit alebo taka fajka tam byva, zalezi od verzie gparted.
Potom vytvorit oddil(y) podla zelania atd. ....

.
.

Uživatelský avatar
Ventero1
Příspěvky: 2470
Registrován: 31 říj 2016, 14:17
Bydliště: Sokolov, Olomouc

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#46 Příspěvek od Ventero1 »

Jeste pro uplnost tabulka msdos = MBR
Zvuky jsou mantrami a myšlenky moudrostí, prostě proto, že se mohou objevovat ...

Uživatelský avatar
Robius
Příspěvky: 8
Registrován: 15 srp 2022, 18:59
Bydliště: Brno

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#47 Příspěvek od Robius »

Děkuji za rady a upozornění na to co dělám špatně. Při poslední instalaci můj disk byl rozdělen takto:

Obrázek

Bohužel systém opět nenaběhl :evil: , tak jsem vše smazal, už asi podvacáté. Jinak už se mi podařilo v GParted převést disk na msdos. Bylo to tam :oops: . Až zase vyšetřím nějaký čas, tak zkusím opět instalaci Linux Mint 21. Pak dám vědět, jak to dopadlo. Kdyby byly nějaké nápady, tak to udělat co nejlíp a správně, tak dejte vědět.

Uživatelský avatar
Ventero1
Příspěvky: 2470
Registrován: 31 říj 2016, 14:17
Bydliště: Sokolov, Olomouc

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#48 Příspěvek od Ventero1 »

Nějak mi moc hlava nebere, proč se na tom slaboučkém Aceru stále snažíš rozjet nejnovější Mint, když by jsi jen těžko hledal méně vhodné distro ..
To opravdu vypadá, že už to nebere to jádro. Též je známo, že novější distra mají jinou verzi modulu i915 - ovladač pro iGPU Intel a se staršími grafikami jsou s tím problémy - většinou, že nelze nastavit vyšší rozlišení, ale vyloučit se nedá ani nenaběhnutí GUI - toto jsem pozoroval třeba kdysi v Lubuntu 14.04.5, které mi na strojích s Intel GPU nenaběhlo do GUI, zatímco verze 14.04.3 bez problémů.
Mimochodem verze Ubu 14.04 a Mint 17.1 - 17.3 byly vůbec nejstabilnější a nejodladěnější systémy. Pak už to jenom patlali a mrvili - systemd a zaměření se na pseudobezpečnost místo funkčnost.

Vhodná distra z Deb rodiny jsem už navrhoval ..
Zvuky jsou mantrami a myšlenky moudrostí, prostě proto, že se mohou objevovat ...

Uživatelský avatar
Robius
Příspěvky: 8
Registrován: 15 srp 2022, 18:59
Bydliště: Brno

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#49 Příspěvek od Robius »

Instalace se podařila. :D Mám nainstalováno - Linux Mint 21 Cinnamon. Zakopaný pes byl nejspíš v tom, že disk nebyl správně v msdos. Instalačka ho brala jako GPT a proto po instalaci neproběhlo nabootování OS jak jsem očekával. Boot info:

Kód: Vybrat vše

boot-repair-4ppa200                                              [20220824_2040]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 21
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /efi/BOOT/fbx64.efi /efi/BOOT/mmx64.efi 
                       /efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi 
                       /efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg


================================ 1 OS detected =================================

OS#1:   OS je v tuto chvíli používán - Linux Mint 21 CurrentSession on sda1

================================ Host/Hardware =================================

CPU architecture: 64-bit
Video: Mobile GM965/GL960 Integrated Graphics Controller (primary) Mobile GM965/GL960 Integrated Graphics Controller (secondary) from Intel Corporation Intel Corporation
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.15.0-46-generic root=UUID=f3bb9169-5885-40ec-aa43-b798123b1a82 ro quiet splash
df -Th / : /dev/sda1        ext4     109G   18G   86G  18% /

===================================== UEFI =====================================

BIOS/UEFI firmware: V1.45 from Acer     
This installed-session is in Legacy/BIOS/CSM mode (not in EFI mode).



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	no-wind,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda2	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda1	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios

Partitions info (2/3): _________________________________________________________

sda2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda1	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda2	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sda1	: not--sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda

fdisk -l (filtered): ___________________________________________________________

Disk sda: 111.79 GiB, 120034123776 bytes, 234441648 sectors
Disk identifier: 0xd44bea54
      Boot   Start       End   Sectors   Size Id Type
sda1  *    1048576 234440703 233392128 111.3G 83 Linux
sda2          2048   1048575   1046528   511M  b W95 FAT32
Partition table entries are not in disk order.

parted -lm (filtered): _________________________________________________________

sda:120GB:scsi:512:512:msdos:ATA Samsung SSD 850:;
2:1049kB:537MB:536MB:fat32::;
1:537MB:120GB:119GB:ext4::boot;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE UUID                                 PARTUUID                             LABEL PARTLABEL
sda                                                                                           
├─sda1 ext4   f3bb9169-5885-40ec-aa43-b798123b1a82 d44bea54-01                                
└─sda2 vfat   1251-0472                            d44bea54-02                                

Mount points (filtered): _______________________________________________________

            Avail Use% Mounted on
/dev/sda1    85.5G  16% /

Mount options (filtered): ______________________________________________________

/dev/sda1   ext4            rw,relatime,errors=remount-ro

====================== sda1/boot/grub/grub.cfg (filtered) ======================

Linux Mint 21 Cinnamon   f3bb9169-5885-40ec-aa43-b798123b1a82
Linux Mint 21 Cinnamon, with Linux 5.15.0-46-generic   f3bb9169-5885-40ec-aa43-b798123b1a82
Linux Mint 21 Cinnamon, with Linux 5.15.0-41-generic   f3bb9169-5885-40ec-aa43-b798123b1a82
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda1/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=f3bb9169-5885-40ec-aa43-b798123b1a82 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda2 during installation
UUID=1251-0472  /boot/efi       vfat    utf8,umask=007,gid=46 0       1
/swapfile                                 none            swap    sw              0       0

======================= sda1/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda1: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
  52.667667389 = 56.551477248   boot/grub/grub.cfg                             1
  76.728443146 = 82.386538496   boot/grub/i386-pc/core.img                     1
  62.385738373 = 66.986176512   boot/vmlinuz                                   1
  22.736885071 = 24.413544448   boot/vmlinuz.old                               1
  22.736885071 = 24.413544448   boot/vmlinuz-5.15.0-41-generic                 1
  62.385738373 = 66.986176512   boot/vmlinuz-5.15.0-46-generic                 1
  78.743675232 = 84.550377472   boot/initrd.img                                1
  77.124996185 = 82.812334080   boot/initrd.img.old                            2
  77.124996185 = 82.812334080   boot/initrd.img-5.15.0-41-generic              2
  78.743675232 = 84.550377472   boot/initrd.img-5.15.0-46-generic              1

===================== sda1: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18683 Apr 15 23:50 10_linux
-rwxr-xr-x 1 root root 43031 Apr 15 23:50 10_linux_zfs
-rwxr-xr-x 1 root root 14180 Apr 15 23:50 20_linux_xen
-rwxr-xr-x 1 root root 13369 Apr 15 23:50 30_os-prober
-rwxr-xr-x 1 root root  1372 Apr 15 23:50 30_uefi-firmware
-rwxr-xr-x 1 root root   700 Feb 19  2022 35_fwupd
-rwxr-xr-x 1 root root   214 Apr 15 23:50 40_custom
-rwxr-xr-x 1 root root   215 Apr 15 23:50 41_custom

=========================== sda1/etc/grub.d/35_fwupd ===========================

#! /bin/sh
# SPDX-License-Identifier: LGPL-2.1+
set -e
[ -d ${pkgdatadir:?} ]
# shellcheck source=/dev/null
. "$pkgdatadir/grub-mkconfig_lib"
if [ -f /var/lib/fwupd/uefi_capsule.conf ] &&
   ls /sys/firmware/efi/efivars/fwupd-*-0abba7dc-e516-4167-bbf5-4d9d1c739416 1>/dev/null 2>&1; then
      . /var/lib/fwupd/uefi_capsule.conf
      if [ "${EFI_PATH}" != "" ] && [ "${ESP}" != "" ]; then
      echo "Adding Linux Firmware Updater entry" >&2
cat << EOF
menuentry 'Linux Firmware Updater' \$menuentry_id_option 'fwupd' {
EOF
      ${grub_probe:?}
      prepare_grub_to_access_device '`${grub_probe} --target=device \${ESP}` | sed -e "s/^/\t/"'
cat << EOF
	chainloader ${EFI_PATH}
}
EOF
      fi
fi

===================== sda2/efi/ubuntu/grub.cfg (filtered) ======================

search.fs_uuid f3bb9169-5885-40ec-aa43-b798123b1a82 root hd0,msdos1 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg



Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub2 of
sda1 into the MBR of sda.
Grub-efi would not be selected by default because no ESP detected.
Additional repair would be performed: unhide-bootmenu-10s

Blockers in case of suggested repair: __________________________________________

 Please use this software in a live-session (live-CD or live-USB). This will enable this feature.

Jen tam teda nemám Swap. Uvidím, jaké to bude mít následky do budoucna. :oops:

Uživatelský avatar
Ventero1
Příspěvky: 2470
Registrován: 31 říj 2016, 14:17
Bydliště: Sokolov, Olomouc

Re: Linux Mint 20.3-upgrade na Linux Mint 21

#50 Příspěvek od Ventero1 »

No - že bude problém v takovém základu jako příprava disku, to jentak člověka nenapadne.

Každopádně, pokud jsi přepsal tabulku odd., tak mi prosím vysvětli, kde se tam vzal ten půlgigový fat32 oddíl?

Swap máš automaticky swapfile namísto swappart - pravděpodobně to platí pro Mint jako Ubu - což je pro SSD nejspíše lepší.
Obavy bych měl z toho, že jsi si nenechal vymluvit ten Cinnamon - ten má letité problémy s nenažraností na mnohem silnějších strojích - ale kdo chce kam ..
Zvuky jsou mantrami a myšlenky moudrostí, prostě proto, že se mohou objevovat ...

Odpovědět