Nová instalace na ASUS Vivobook M1502NAQ

[menom]

.

K acpi problematike je to niekolko moznosti co sa este da skusit, ale len na vlastne riziko.

The kernel’s command-line parameters:

Kód: Vybrat vše

acpi=           [HW,ACPI,X86,ARM64,RISCV64,EARLY]
                        Advanced Configuration and Power Interface
                        Format: { force | on | off | strict | noirq | rsdt |
                                  copy_dsdt | nospcr }
                        force -- enable ACPI if default was off
                        on -- enable ACPI but allow fallback to DT [arm64,riscv64]
                        off -- disable ACPI if default was on
                        noirq -- do not use ACPI for IRQ routing
                        strict -- Be less tolerant of platforms that are not
                                strictly ACPI specification compliant.
                        rsdt -- prefer RSDT over (default) XSDT
                        copy_dsdt -- copy DSDT to memory
                        nocmcff -- Disable firmware first mode for corrected
                        errors. This disables parsing the HEST CMC error
                        source to check if firmware has set the FF flag. This
                        may result in duplicate corrected error reports.
                        nospcr -- disable console in ACPI SPCR table as
                                default _serial_ console on ARM64
                        For ARM64, ONLY "acpi=off", "acpi=on", "acpi=force" or
                        "acpi=nospcr" are available
                        For RISCV64, ONLY "acpi=off", "acpi=on" or "acpi=force"
                        are available

                        See also Documentation/power/runtime_pm.rst, pci=noacpi

.

[alojz]

...alebo nacitat ovladac klavesnice i8042,potom parameter pridat do GRUBu...
...namiesto uspania treba skusit hybernaciu...
...vypis z inxi -F sa stratil???...

[raadda]

Kód: Vybrat vše

 inxi -F 

System:
Host: pavla-Vivobook-15-M1502NAQ Kernel: 6.17.0-1017-oem arch: x86_64
bits: 64
Desktop: Xfce v: 4.18.1 Distro: Linux Mint 22.3 Zena
Machine:
Type: Laptop System: ASUS product: Vivobook 15 M1502NAQ v: 1.0
serial: <superuser required>
Mobo: ASUSTeK model: M1502NAQ v: 1.0 serial: <superuser required>
UEFI: American Megatrends LLC. v: M1502NAQ.302 date: 01/05/2026
CPU:
Info: single core model: AMD Ryzen 5 150 with Radeon Graphics bits: 64
type: UP cache: L2: 512 KiB
Speed (MHz): 4208 min/max: N/A core: 1: 4208
Graphics:
Device-1: AMD Rembrandt [Radeon 680M] driver: N/A
Device-2: ShineTech USB2.0 HD UVC WebCam driver: uvcvideo type: USB
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X:
loaded: modesetting unloaded: fbdev,radeon,vesa dri: swrast gpu: N/A
resolution: 1920x1080~60Hz
API: EGL v: 1.5 drivers: swrast platforms: x11,surfaceless,device
API: OpenGL v: 4.5 vendor: mesa v: 26.0.0-devel renderer: llvmpipe (LLVM
20.1.8 256 bits)
API: Vulkan v: 1.3.275 drivers: N/A surfaces: xcb,xlib
Audio:
Device-1: AMD Rembrandt Radeon High Definition Audio driver: snd_hda_intel
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor driver: N/A
Device-3: AMD Family 17h/19h HD Audio driver: snd_hda_intel
API: ALSA v: k6.17.0-1017-oem status: kernel-api
Server-1: PipeWire v: 1.0.5 status: active
Network:
Device-1: MEDIATEK driver: mt7921e
IF: wlp1s0 state: up mac: f0:68:e3:a3:34:7a
Bluetooth:
Device-1: IMC Networks Wireless_Device driver: btusb type: USB
Report: hciconfig ID: hci0 state: up address: F0:68:E3:A3:34:7B bt-v: 5.2
Drives:
Local Storage: total: 476.94 GiB used: 119.7 GiB (25.1%)
ID-1: /dev/nvme0n1 vendor: Micron model: MTFDKBA512QGN-1BN1AABGA
size: 476.94 GiB
Partition:
ID-1: / size: 467.89 GiB used: 119.7 GiB (25.6%) fs: ext4
dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat
dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
System Temperatures: cpu: 47.4 C mobo: 40.0 C
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 14.88 GiB used: 1.38 GiB (9.3%)
Processes: 179 Uptime: 6m Shell: Bash inxi: 3.3.34

Kód: Vybrat vše

 cat /proc/bus/input/devices 

I: Bus=0011 Vendor=0001 Product=0001 Version=ab83
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0 leds
B: PROP=0
B: EV=120013
B: KEY=2000007 ff803078f800d001 feffffdfffcfffff fffffffffffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=25a7 Product=fa10 Version=0110
N: Name="Nordic 2.4G Wireless Receiver"
P: Phys=usb-0000:03:00.4-3/input0
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-3/3-3:1.0/0003:25A7:FA10.0001/input/input2
U: Uniq=
H: Handlers=sysrq kbd event1 leds
B: PROP=0
B: EV=120013
B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=25a7 Product=fa10 Version=0110
N: Name="Nordic 2.4G Wireless Receiver Mouse"
P: Phys=usb-0000:03:00.4-3/input1
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-3/3-3:1.1/0003:25A7:FA10.0002/input/input3
U: Uniq=
H: Handlers=mouse0 event2
B: PROP=0
B: EV=17
B: KEY=1f0000 0 0 0 0
B: REL=1943
B: MSC=10

I: Bus=0003 Vendor=25a7 Product=fa10 Version=0110
N: Name="Nordic 2.4G Wireless Receiver"
P: Phys=usb-0000:03:00.4-3/input1
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-3/3-3:1.1/0003:25A7:FA10.0002/input/input4
U: Uniq=
H: Handlers=event3
B: PROP=0
B: EV=100001

I: Bus=0003 Vendor=25a7 Product=fa10 Version=0110
N: Name="Nordic 2.4G Wireless Receiver Consumer Control"
P: Phys=usb-0000:03:00.4-3/input1
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-3/3-3:1.1/0003:25A7:FA10.0002/input/input5
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=1f
B: KEY=33eff 0 0 483ffff17aff32d bfd4444600000000 1 130c730b17c000 267bfad9415fed 9e168000004400 10000002
B: REL=1040
B: ABS=100000000
B: MSC=10

I: Bus=0003 Vendor=25a7 Product=fa10 Version=0110
N: Name="Nordic 2.4G Wireless Receiver System Control"
P: Phys=usb-0000:03:00.4-3/input1
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-3/3-3:1.1/0003:25A7:FA10.0002/input/input6
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=13
B: KEY=c000 10000000000000 0
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HD-Audio Generic HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input9
U: Uniq=
H: Handlers=event6
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HD-Audio Generic HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input10
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HD-Audio Generic HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input11
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HD-Audio Generic Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input12
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=4

volby "acpi=on", "acpi=force", "acpi=noirq", "acpi=strict" jsem zkoušel, všechny vedou k okamžitému zamrznutí.

O uspávání se ani nesnažím. Stačí, když to půjde alespoň korektně vypnout a pak zase zapnout

[menom]

.

O touchpade sa tam nepise, mozno skusit zavest modul ovladaca:

Kód: Vybrat vše

sudo modprobe elan_i2c

Potom skusit touchpad ci nahodou nezacne fungovat.

Este mozno skusit ak uz neni v prevadzke modul ovladaca na funkcne klavesy ovladanie hlasitosti a jasu a wifi atd...

Kód: Vybrat vše

sudo modprobe asus_nb_wmi

Hardver je to hodne novy, ten cpu ma jedno jadro, to fakt...
Alebo zla detekcia HW.

.

[raadda]

V každém případě děkuji mnohokrát za rady a podněty, i když nezabraly.
Zkoušel jsem i jádra 6.8 a 6.6 a je to stejné. BIOS má nějaký zásadní bug v acpi a linux (ani jiné distribuce) není možné bez acpi=off rozjet ani v minimálním režimu. Bohužel nemůžu tak získat ani ACPI dump na nějakou opravu.

ad CPU: To je nějaká špatná detekce HW. Má mít 6 jader.

[menom]

.

Este mozes skusit zistit jaka je windows tabulka DSDT, zadanim do terminalu:

Kód: Vybrat vše

sudo strings /sys/firmware/acpi/tables/DSDT | grep -i "windows " | sort | tail -1

Potom pri spusteni systemu mozno pouzit toto v parametri pre jadro namiesto Windows 2000

.

Kód: Vybrat vše

acpi_osi=! acpi_osi="Windows 2000"

Proste tam bude nejaky rok a ten zadat misto 2000
Ten parameter na vypnuti acpi=off v tomto pripade nepouzit, len tie vyssie napisane.

Tym by sa mala pouzit ta tabulka acpi z windowsu. Neni sa coho obavat, tieto parametre su v dokumentacii k jadru linuxu.

.

[alojz]

...nestracaj hlavu,ani nadej...na ACER aspire sme rok instalovali linux...plus dva krat bol v servise,na reklamacku...po roku sa to podarilo...