Problem s instalaciou Linux Mint Rafaela 17.2 Mate

[menom]

.

No prave preto vo vypisoch by sme sa dozvedeli viac.

Videl som aj take pripady co si mysleli ze maju instalovany system a nakonec

to bola nedokoncena (zmrsena) instalacia .....


.

[boris1boris]

Bod1.:
Model ATA WDC WD3200BEVT-2
Disk /dev/sda/:320 GB
Sector size (logical/physical):512 B/512B
Partition table: msdos
Number1 start:1049kB end: 318GB size:318GB type: primary file system: ext4 flags:boot
Number2 start:318GB end: 320GB size: 2072MB type:extended
Number5: start: 318gb end: 320gb size: 2072 mb type: logical. Linux-swap(v1)
Error: invalid partition table - recursive partition on /dev/sr0

Ja som sa to snazil nainstalovat aj z miniISO, alebo nejak tak sa to volalo a vtedy som asi narobil problem s particiou.

Bod2. Strasne dlhy- asi netreba ked hned v bode 1 je chyba?

Bod3.: intel mobile 4series integrated x. Org 1.15.1 driver: intel (unloaded: fbdev, vesa) res. 1280x 800

Pisem to z iPadu, je to hrozne vytukavanie

[menom]

.

Error: invalid partition table - recursive partition on /dev/sr0

Toto sa tyka DVD mechaniky - toho spusteneho LiveDVD, takze s HDD to nema nic, to je vporiadku.

Nikto nechce aby si to opisoval.
Ked mas spustene LiveDVD tak sa neda ti neda pripojit na net aby si to kopiroval ?

Ale nevadi.

Takze bud to cele znova preinstalujes, alebo este mozes nieco skusit:

Za nomodeset daj i915.modeset=0
podobne ako v tom 2.pokuse:

2.) ...splash quiet $vt_handoff nomodeset i915.modeset=0

# Poznamka: Na konci za = je nula
Vyskusaj ci to nabehne


.

[boris1boris]

1.] Model: ATA WDC WD3200BEVT-2 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number Start End Size Type File system Flags
1 1049kB 318GB 318GB primary ext4 boot
2 318GB 320GB 2072MB extended
5 318GB 320GB 2072MB logical linux-swap(v1)


Error: Invalid partition table - recursive partition on /dev/sr0.
Ignore/Cancel?

2.]
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00069dc7

Device Boot Start End Blocks Id System
/dev/sda1 * 2048 621092863 310545408 83 Linux
/dev/sda2 621094910 625141759 2023425 5 Extended
/dev/sda5 621094912 625141759 2023424 82 Linux swap / Solaris

3.]
System: Host: mint Kernel: 3.16.0-38-generic i686 (32 bit) Desktop: Xfce 4.12.2 Distro: Linux Mint 17.2 Rafaela
Machine: System: Acer product: Extensa 5630 version: 0100
Mobo: Acer model: Homa version: Rev Bios: Phoenix version: V1.30 date: 03/19/2009
CPU: Dual core Intel Pentium Dual CPU T3200 (-MCP-) cache: 1024 KB flags: (lm nx pae sse sse2 sse3 ssse3)
Clock Speeds: 1: 1995.141 MHz 2: 1995.141 MHz
Graphics: Card: Intel Mobile 4 Series Integrated Graphics Controller
X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@60.0hz
GLX Renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2 GLX Version: 2.1 Mesa 10.1.3
Audio: Card: Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.16.0-38-generic
Network: Card-1: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) driver: ath9k
IF: wlan0 state: down mac: 00:23:4e:02:4c:2a
Card-2: Broadcom NetXtreme BCM5764M Gigabit Ethernet PCIe driver: tg3
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:1d:72:e3:c1:90
Drives: HDD Total Size: 320.1GB (-) 1: id: /dev/sda model: WDC_WD3200BEVT size: 320.1GB
Partition: ID: / size: 975M used: 47M (5%) fs: overlayfs ID: swap-1 size: 2.07GB used: 0.00GB (0%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 86.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 159 Uptime: 11 min Memory: 310.2/1948.8MB Client: Shell (bash) inxi: 1.9.17

[boris1boris]

...ten i915 nefungoval.

[menom]

.

Dobre a to co si pisal na zaciatku, ze ti funguje s LiveDVD si skusal aj pre instalovany system ?

Kód: Vybrat vše

nolapic acpi=off

Ak to neide este by si mohol skusit:

Kód: Vybrat vše

nolapic acpi=ht

.

[menom]

.

Sensors: System Temperatures: cpu: 86.0C

Ak to neni len vypnutym acpi, tak asi bude nutne vymenit teplovodivu pastu medzi procesorom a chladicom.

Bios: Phoenix version: V1.30 date: 03/19/2009

Dobre by bolo aj flashnut novsiu verziu BIOSu je tam 1.36:

http://www.acer.cz/ac/cs/CZ/content/drivers


.

[boris1boris]

Ked dam nolapic acpi=off, tak zacne nabiehat ubuntu 14.04 (fialove pozadie) a potom obrazovka zcernie a ziada ubuntu login.
Nie je tam nejaky konflikt s ubuntu a linux mint. Ako sformatovat hdd, aby som vycistil starsie neuspesne instalacne pokusy?

[menom]

.

Je na to vyborny program GParted ktory mas asi na kazdom LiveDVD s linuxom.


Namiesto uplneho vypnutia acpi by si mal pouzit tu druhu moznost

Kód: Vybrat vše

acpi=ht

Teda ak funguje, lebo 86 °C to je strasne ...


.

[boris1boris]

Nolapic acpi=ht sa neda spustit zamrzne to.
Gparted funguje, ale ako by malo vyzerat spravne formatovanie? Je tam vela moznosti.
Lebo teraz mi to hadze do rescue modu.