Fórum Linux Mint CZ&SK

české a slovenské fórum o linuxové distribuci Linux Mint
https://forum.linux-mint-czech.cz/

TP-link WN727N v3

https://forum.linux-mint-czech.cz/viewtopic.php?t=2570

Stránka 1 z 1

TP-link WN727N v3

Napsal: 28 říj 2016, 16:06
od radosto
Zdravím,

Mám doma starší počítač, kde byly XP a (a jako druhý systém vždy nějaký linux, novéjši win (i 10) na zkoušku). Počitač byl připojený i internetu přes kabel, teď je přemístěn a dokoupil jsem k němu (kabel se na tam nedostane) USB wifi adapter. S Windows (7, 8, 10) funguje skvěle. Signál je dobrý (to samé, když k pc dám notebook OS X a mobil - vše ok).

Jenže po instalaci linuxu (Ubuntu, Elementary OS, Mint) ze začátku fungovala, poté při pŕihlašování už ne.

Na fórech jsem hledal a zkoušel. A nic. Rady už nefungovaly, Alternativní ovladač už v jádru (měl být ve verzi 3.x.x) asi není.

Naposledy jsem zkoušel:
https://help.ubuntu.com/community/WifiD ... enda_W311M - tady návod na rt2800usb driver nefungoval (asi jak jsem psal výše), co se týče prvního postupu popsaného i tady https://ubuntuforums.org/showthread.php?t=1949996 tak se objevil problém (ne v tom, že by stránky na ovladač neexistovali, našel jsem ovladač na ofic. stránkách nového vlastníka) Nicméně ovladači asi něco chybělo, protože to vyhodilo toto:

Kód: Vybrat vše

cp -f os/linux/Makefile.clean os/linux/Makefile
make -C os/linux clean
make[1]: Vstupuje se do adresáře „/home/XXX/Plocha/ralink/os/linux“
rm -f ../../common/*.o
rm -f ../../common/.*.{cmd,flags,d}
rm -f ../../os/linux/*.{o,ko,mod.{o,c}}
rm -f ../../os/linux/.*.{cmd,flags,d}
rm -fr ../../os/linux/.tmp_versions
rm -f ../../os/linux/Module.symvers
rm -f ../../os/linux/Modules.symvers
rm -f ../../os/linux/Module.markers
rm -f ../../os/linux/modules.order
rm -f ../../chips/*.o
rm -f ../../chips/.*.{cmd,flags,d}
rm -f ../../rate_ctrl/*.o
rm -f ../../rate_ctrl/.*.{cmd,flags,d}
rm -f ../../ate/common/*.o
rm -f ../../ate/common/.*.{cmd,flags,d}
rm -f ../../ate/chips/*.o
rm -f ../../ate/chips/.*.{cmd,flags,d}
rm -f ../../sta/*.o
rm -f ../../sta/.*.{cmd,flags,d}
make[1]: Opouští se adresář „/home/XXXPlocha/ralink/os/linux“
rm -rf os/linux/Makefile
Tak tedy k věci TP-link WN727N v3 nefunguje na Linux Mint

Tady je lsusb:

Kód: Vybrat vše

Bus 001 Device 002: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
tady analýza wifi:

Kód: Vybrat vše


########## wireless info START ##########

Report from: 28 Oct 2016 11:35 CEST +0200

Booted last: 28 Oct 2016 00:00 CEST +0200

Script from: 08 Jul 2016 02:16 UTC +0000

##### release ###########################

Distributor ID:	LinuxMint
Description:	Linux Mint 18 Sarah
Release:	18
Codename:	sarah

##### kernel ############################

Linux 4.4.0-21-generic #37-Ubuntu SMP Mon Apr 18 18:34:49 UTC 2016 i686 i686 i686 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=7

##### desktop ###########################

sed: can't read /root/.dmrc: No such file or directory

Could not be determined.

##### lspci #############################

02:09.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
	Subsystem: Gigabyte Technology Co., Ltd Marvell 88E8001 Gigabit Ethernet Controller (Gigabyte) [1458:e000]
	Kernel driver in use: skge

##### lsusb #############################

Bus 001 Device 002: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: phy0: Wireless LAN
	Soft blocked: yes
	Hard blocked: no

##### lsmod #############################

rt2800usb              28672  0
rt2x00usb              20480  1 rt2800usb
rt2800lib              90112  1 rt2800usb
rt2x00lib              49152  3 rt2x00usb,rt2800lib,rt2800usb
mac80211              659456  3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211              499712  2 mac80211,rt2x00lib
crc_ccitt              16384  1 rt2800lib

##### interfaces ########################

auto lo
iface lo inet loopback

##### ifconfig ##########################

enp2s9    Link encap:Ethernet  HWaddr <MAC 'enp2s9' [IF1]>  
          inet addr:192.168.1.6  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::4272:f041:201:80ef/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:360848 errors:0 dropped:0 overruns:0 frame:0
          TX packets:199346 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:533127894 (533.1 MB)  TX bytes:15541680 (15.5 MB)
          Interrupt:20 

wlx<IF from MAC [IF2]> Link encap:Ethernet  HWaddr <MAC 'wlx<IF from MAC [IF2]>' [IF2]>  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

##### iwconfig ##########################

enp2s9    no wireless extensions.

lo        no wireless extensions.

wlx<IF from MAC [IF2]>  IEEE 802.11bgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          

##### route #############################

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    100    0        0 enp2s9
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 enp2s9
192.168.1.0     0.0.0.0         255.255.255.0   U     100    0        0 enp2s9

##### resolv.conf #######################

nameserver 127.0.1.1

##### network managers ##################

Installed:

	NetworkManager

Running:

root       748     1  0 10:16 ?        00:00:03 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                         enp2s9
GENERAL.TYPE:                           ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                         Marvell Technology Group Ltd.
GENERAL.PRODUCT:                        88E8001 Gigabit Ethernet Controller (Marvell 88E8001 Gigabit Ethernet Controller (Gigabyte))
GENERAL.DRIVER:                         skge
GENERAL.DRIVER-VERSION:                 1.14
GENERAL.FIRMWARE-VERSION:               
GENERAL.HWADDR:                         <MAC 'enp2s9' [IF1]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/net/enp2s9
GENERAL.IP-IFACE:                       enp2s9
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     Drátové připojení 1
GENERAL.CON-UUID:                       6440fcb6-0512-4f49-bacf-264089371ce1
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/5
GENERAL.METERED:                        no (guessed)
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                     100 Mb/s
CAPABILITIES.IS-SOFTWARE:               no
WIRED-PROPERTIES.CARRIER:               on
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:   6440fcb6-0512-4f49-bacf-264089371ce1 | Drátové připojení 1
IP4.ADDRESS[1]:                         192.168.1.6/24
IP4.GATEWAY:                            192.168.1.1
IP4.ROUTE[1]:                           dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]:                             192.168.1.1
IP4.DNS[2]:                             93.93.33.33
DHCP4.OPTION[1]:                        requested_routers = 1
DHCP4.OPTION[2]:                        requested_domain_search = 1
DHCP4.OPTION[3]:                        requested_time_offset = 1
DHCP4.OPTION[4]:                        requested_domain_name = 1
DHCP4.OPTION[5]:                        requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[6]:                        requested_broadcast_address = 1
DHCP4.OPTION[7]:                        requested_netbios_scope = 1
DHCP4.OPTION[8]:                        requested_wpad = 1
DHCP4.OPTION[9]:                        next_server = 0.0.0.0
DHCP4.OPTION[10]:                       expiry = 1477733701
DHCP4.OPTION[11]:                       requested_interface_mtu = 1
DHCP4.OPTION[12]:                       requested_subnet_mask = 1
DHCP4.OPTION[13]:                       dhcp_lease_time = 86400
DHCP4.OPTION[14]:                       dhcp_message_type = 5
DHCP4.OPTION[15]:                       ip_address = 192.168.1.6
DHCP4.OPTION[16]:                       requested_static_routes = 1
DHCP4.OPTION[17]:                       requested_domain_name_servers = 1
DHCP4.OPTION[18]:                       routers = 192.168.1.1
DHCP4.OPTION[19]:                       broadcast_address = 192.168.1.255
DHCP4.OPTION[20]:                       requested_ntp_servers = 1
DHCP4.OPTION[21]:                       requested_netbios_name_servers = 1
DHCP4.OPTION[22]:                       domain_name_servers = 192.168.1.1 93.93.33.33
DHCP4.OPTION[23]:                       requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]:                       subnet_mask = 255.255.255.0
DHCP4.OPTION[25]:                       network_number = 192.168.1.0
DHCP4.OPTION[26]:                       requested_host_name = 1
DHCP4.OPTION[27]:                       dhcp_server_identifier = 192.168.1.1
IP6.ADDRESS[1]:                         fe80::4272:f041:201:80ef/64
IP6.GATEWAY:                            

GENERAL.DEVICE:                         wlx<IF from MAC [IF2]>
GENERAL.TYPE:                           wifi
GENERAL.NM-TYPE:                        NMDeviceWifi
GENERAL.VENDOR:                         TPlink
GENERAL.PRODUCT:                        802.11 n WLAN
GENERAL.DRIVER:                         rt2800usb
GENERAL.DRIVER-VERSION:                 4.4.0-21-generic
GENERAL.FIRMWARE-VERSION:               N/A
GENERAL.HWADDR:                         <MAC 'wlx<IF from MAC [IF2]>' [IF2]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          20 (unavailable)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/net/wlx<IF from MAC [IF2]>
GENERAL.IP-IFACE:                       
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     --
GENERAL.CON-UUID:                       --
GENERAL.CON-PATH:                       --
GENERAL.METERED:                        unknown
CAPABILITIES.CARRIER-DETECT:            no
CAPABILITIES.SPEED:                     unknown
CAPABILITIES.IS-SOFTWARE:               no
WIFI-PROPERTIES.WEP:                    yes
WIFI-PROPERTIES.WPA:                    yes
WIFI-PROPERTIES.WPA2:                   yes
WIFI-PROPERTIES.TKIP:                   yes
WIFI-PROPERTIES.CCMP:                   yes
WIFI-PROPERTIES.AP:                     yes
WIFI-PROPERTIES.ADHOC:                  yes
WIFI-PROPERTIES.2GHZ:                   yes
WIFI-PROPERTIES.5GHZ:                   no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: 

SSID  BSSID  MODE  CHAN  FREQ  RATE  SIGNAL  BARS  SECURITY  ACTIVE  * 

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=false
WWANEnabled=true

##### NetworkManager.conf ###############

[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

[ifupdown]
managed=false

##### NetworkManager profiles ###########

[[/etc/NetworkManager/system-connections/XXX 1]] (600 root)
[connection] id=XXX 1 | type=wifi | permissions=user:XXX:;
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF2]>' [IF2]> | mac-address-blacklist= | ssid=XXX
[ipv4] method=auto
[ipv6] method=auto

[[/etc/NetworkManager/system-connections/XXX]] (600 root)
[connection] id=XXX | type=wifi | permissions=user:mint:;
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF2]>' [IF2]> | mac-address-blacklist= | ssid=XXX
[ipv4] method=auto
[ipv6] method=auto

##### iw reg get ########################

Region: Europe/Prague (based on set time zone)

country 00: DFS-UNSET
	(2402 - 2472 @ 40), (N/A, 20), (N/A)
	(2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
	(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
	(5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
	(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
	(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
	(5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
	(57240 - 63720 @ 2160), (N/A, 0), (N/A)

##### iwlist channels ###################

enp2s9    no frequency information.

lo        no frequency information.

wlx<IF from MAC [IF2]>  14 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 14 : 2.484 GHz

##### iwlist scan #######################

wlx<IF from MAC [IF2]>  Interface doesn't support scanning : Network is down

enp2s9    Interface doesn't support scanning.

lo        Interface doesn't support scanning.

##### module infos ######################

[rt2800usb]
filename:       /lib/modules/4.4.0-21-generic/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko
license:        GPL
firmware:       rt2870.bin
description:    Ralink RT2800 USB Wireless LAN driver.
version:        2.3.0
author:         http://rt2x00.serialmonkey.com
srcversion:     CD175F3067617C23A4A79F3
depends:        rt2x00lib,rt2800lib,rt2x00usb
intree:         Y
vermagic:       4.4.0-21-generic SMP mod_unload modversions 686 
parm:           nohwcrypt:Disable hardware encryption. (bool)

[rt2x00usb]
filename:       /lib/modules/4.4.0-21-generic/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko
license:        GPL
description:    rt2x00 usb library
version:        2.3.0
author:         http://rt2x00.serialmonkey.com
srcversion:     FADD78F4B0B6C8F4DDFA8E5
depends:        rt2x00lib,mac80211
intree:         Y
vermagic:       4.4.0-21-generic SMP mod_unload modversions 686 

[rt2800lib]
filename:       /lib/modules/4.4.0-21-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko
license:        GPL
description:    Ralink RT2800 library
version:        2.3.0
author:         http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
srcversion:     BB9F48B63A82C3FD3E73BAF
depends:        rt2x00lib,mac80211,crc-ccitt
intree:         Y
vermagic:       4.4.0-21-generic SMP mod_unload modversions 686 

[rt2x00lib]
filename:       /lib/modules/4.4.0-21-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
license:        GPL
description:    rt2x00 library
version:        2.3.0
author:         http://rt2x00.serialmonkey.com
srcversion:     72E39180D883A5541F66494
depends:        mac80211,cfg80211
intree:         Y
vermagic:       4.4.0-21-generic SMP mod_unload modversions 686 

[mac80211]
filename:       /lib/modules/4.4.0-21-generic/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:     A882F4FE63500846E1C859E
depends:        cfg80211
intree:         Y
vermagic:       4.4.0-21-generic SMP mod_unload modversions 686 
parm:           minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:       /lib/modules/4.4.0-21-generic/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
srcversion:     00D8DA6D3B739DDD31FFF50
depends:        
intree:         Y
vermagic:       4.4.0-21-generic SMP mod_unload modversions 686 
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[rt2800usb]
nohwcrypt: N

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500

[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

rt2800usb
rt5370sta

##### modprobe options ##################

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en

##### rc.local ##########################

exit 0

##### pm-utils ##########################

##### udev rules ########################

##### dmesg #############################

[ 2382.797073] skge 0000:02:09.0 enp2s9: Link is down
[ 2411.630143] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2411.667468] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2411.675971] wlx<IF from MAC [IF2]>: authenticated
[ 2411.680057] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2411.784032] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2411.888026] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2411.992027] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2413.320564] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2413.353649] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2413.356307] wlx<IF from MAC [IF2]>: authenticated
[ 2413.360465] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2413.464037] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2413.568036] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2413.672028] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2415.400963] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2415.437505] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2415.442887] wlx<IF from MAC [IF2]>: authenticated
[ 2415.444076] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2415.548079] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2415.652047] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2415.756055] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2417.980539] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2418.021520] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2418.028902] wlx<IF from MAC [IF2]>: authenticated
[ 2418.032351] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2418.136041] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2418.240034] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2418.344068] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2430.756832] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2430.793487] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2430.797392] wlx<IF from MAC [IF2]>: authenticated
[ 2430.800269] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2430.904041] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2431.008027] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2431.112023] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2461.075330] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF2]>: link is not ready
[ 2653.771134] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2653.805514] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2653.809517] wlx<IF from MAC [IF2]>: authenticated
[ 2653.812375] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2653.916026] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2654.020027] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2654.124024] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2665.365074] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2665.397459] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2665.399081] wlx<IF from MAC [IF2]>: authenticated
[ 2665.404072] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2665.512049] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2665.620025] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2665.724068] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2685.082402] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2685.117502] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2685.125126] wlx<IF from MAC [IF2]>: authenticated
[ 2685.128159] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2685.232055] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2685.336062] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2685.440060] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2696.661583] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2696.710721] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2696.714983] wlx<IF from MAC [IF2]>: authenticated
[ 2696.720070] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2696.824074] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2696.928071] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2697.032028] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2718.246013] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2718.285514] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2718.292790] wlx<IF from MAC [IF2]>: authenticated
[ 2718.296208] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2718.400055] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2718.504029] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2718.608030] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2736.025022] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 2736.057424] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 2736.059048] wlx<IF from MAC [IF2]>: authenticated
[ 2736.064076] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 2736.168025] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 2736.276025] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 2736.384031] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 2761.448431] skge 0000:02:09.0 enp2s9: Link is up at 100 Mbps, full duplex, flow control both
[ 2766.109199] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF2]>: link is not ready
[ 4002.206581] skge 0000:02:09.0 enp2s9: Link is down
[ 4015.910491] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 4015.951616] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 4015.953237] wlx<IF from MAC [IF2]>: authenticated
[ 4015.956230] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 4016.060518] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 4016.164056] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 4016.268042] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 4027.493429] wlx<IF from MAC [IF2]>: authenticate with <MAC address>
[ 4027.533081] wlx<IF from MAC [IF2]>: send auth to <MAC address> (try 1/3)
[ 4027.534740] wlx<IF from MAC [IF2]>: authenticated
[ 4027.544058] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 1/3)
[ 4027.648332] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 2/3)
[ 4027.752083] wlx<IF from MAC [IF2]>: associate with <MAC address> (try 3/3)
[ 4027.856120] wlx<IF from MAC [IF2]>: association with <MAC address> timed out
[ 4065.038840] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF2]>: link is not ready
[ 4744.777715] skge 0000:02:09.0 enp2s9: Link is up at 100 Mbps, full duplex, flow control both

########## wireless info END ############

Prosím o pomoc. Můžu na chvíli k počítači nátáhnout kabel (= kabel visí přes celý byt, já musím ve vzduchu přidžovat router Asus RT-N10), takže opravdu jen na vyřešení problému.

Díky

edit: ještě je možnost b) nechci do toho počítače už vůbec investovat, ale pár korun bych za jinou wifi dát mohl. Co si myslíte o tomhle? Bude to na linux Mint fungovat? (pokud to tedy lze z popisu vyčíst) https://www.aliexpress.com/item/Hot-150 ... 7c35bd4403

Re: TP-link WN727N v3

Napsal: 28 říj 2016, 20:28
od radosto
Díky dostal jsem se snad dál, ale po "make" to něco dělá a na konci to hází tuto chybu.

Kód: Vybrat vše

/home/XXX/Plocha/ralink/os/linux/../../sta/sta_cfg.c:4987:85: error: macro "__DATE__" might prevent reproducible builds [-Werror=date-time]
snprintf(extra, size, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
^
/home/xxx/Plocha/ralink/os/linux/../../sta/sta_cfg.c:4987:95: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
snprintf(extra, size, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
^
/home/XXX/Plocha/ralink/os/linux/../../sta/sta_cfg.c: In function ‘set_quality’:
/home/XXX/Plocha/ralink/os/linux/../../sta/sta_cfg.c:5548:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
BOOLEAN bInitial = FALSE;
^
cc1: some warnings being treated as errors
scripts/Makefile.build:258: návod pro cíl „/home/xxx/Plocha/ralink/os/linux/../../sta/sta_cfg.o“ selhal
make[2]: *** [/home/XXX/Plocha/ralink/os/linux/../../sta/sta_cfg.o] Chyba 1
Makefile:1396: návod pro cíl „_module_/home/XXX/Plocha/ralink/os/linux“ selhal
make[1]: *** [_module_/home/XXX/Plocha/ralink/os/linux] Chyba 2
make[1]: Opouští se adresář „/usr/src/linux-headers-4.4.0-21-generic“
Makefile:388: návod pro cíl „LINUX“ selhal
make: *** [LINUX] Chyba 2

Re: TP-link WN727N v3

Napsal: 29 říj 2016, 10:17
od radosto
Diky.

Trochu jsem se posunul. Wifi občas funguje, občas ne. Teď zrovna ano, ale ve výpisu není up ani down, ale toto:

Kód: Vybrat vše

Card-2: Ralink RT5370 Wireless Adapter driver: rt2800usb
           IF: wlxf81a671bef1d state: N/A mac: N/A
To wicd zkusím.

Re: TP-link WN727N v3

Napsal: 29 říj 2016, 13:27
od radosto
Zkusil jsem nainstalovat wicd.

Před instalací to fungovalo (i přes status N/A) střídavě, po instalaci už lépe (ten status N/A to má furt). Po rebootu ještě lepé. Takže zatím dobrý. Pokud by to dělalo problémy, tak zkusím ten návod na debian. Pokud to funguje, tak do toho už vrtat nechci.

Co se týče Mint17 ten jsem zkoušel již dříve a byl tam stejný problém. S tím rozdílem, že v live Mint wifi fungovala a po instalaci už ne. V Mint 18 nefungovala wifi už při live.

Díky moc za rady. Kdyby byl problém tak to tu oživím.
Všechny časy jsou v UTC+02:00
Stránka 1 z 1

Založeno na phpBB® Forum Software © phpBB Limited

Český překlad – phpBB.cz