TP-Link Archer T2U

[dusan2021]

Zdravím, chcel by som sa spýtať ako vyriešiť problém z usb Wifi adaptérom TP-Link Archer T2U.
Linux Mint 18.2, ktorý mám nainštalovaný neobsahuje jeho ovládače, na priloženom CD taktiež nie sú a na ich stránke keď si ich stiahnem tak mi pri dodržaní nimi uvedeného postupu pre inštaláciu vyhadzuje chybu. Vedel by mi niekto poradiť, ako tento adaptér nainštalovať ?

[dusan2021]

redhawk:
1. kod

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 148f:761a Ralink Technology, Corp.
Bus 001 Device 006: ID 062a:4101 Creative Labs Wireless Keyboard/Mouse
Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 002: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

2. kod

System: Host: dusan-A880GU3 Kernel: 4.10.0-27-generic x86_64 (64 bit) Desktop: Cinnamon 3.4.4
Distro: Linux Mint 18.2 Sonya
Machine: Mobo: TAR model: A880GU3 Bios: American Megatrends v: 080016 date: 01/25/2011
CPU: Quad core AMD Phenom II X4 840 (-MCP-) cache: 2048 KB
clock speeds: max: 3200 MHz 1: 800 MHz 2: 1900 MHz 3: 800 MHz 4: 1900 MHz
Graphics: Card: NVIDIA GF104 [GeForce GTX 460 OEM]
Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1280x1024@60.02hz
GLX Renderer: Gallium 0.4 on NVC4 GLX Version: 3.0 Mesa 12.0.6
Audio: Card-1 NVIDIA GF104 High Definition Audio Controller driver: snd_hda_intel
Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA) driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.10.0-27-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: 00:30:67:c2:66:5b
Card-2: Ralink
IF: null-if-id state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 1000.2GB (1.4% used) ID-1: /dev/sda model: WDC_WD10EAVS size: 1000.2GB
Partition: ID-1: / size: 440G used: 9.4G (3%) fs: ext4 dev: /dev/sda5
ID-2: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda6
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 37.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 210 Uptime: 27 min Memory: 1573.5/3949.5MB Client: Shell (bash) inxi: 2.2.35

[dusan2021]

munu kernel 4.10.0
ten postup tiez nefunguje

tuto chybu mi vypisuje

make
make -C tools
make[1]: Entering directory '/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory '/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/tools'
/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/tools/bin2h
chipset = mt7610u
cp -f os/linux/Makefile.6 /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/Makefile
make -C /lib/modules/4.10.0-27-generic/build SUBDIRS=/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux modules
make[1]: Entering directory '/usr/src/linux-headers-4.10.0-27-generic'
CC [M] /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.o
In file included from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_os.h:44:0,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_comm.h:75,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/rt_config.h:33,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:28:
/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/os/rt_linux.h:77:0: warning: "EXT_BUILD_CHANNEL_LIST" redefined
#define EXT_BUILD_CHANNEL_LIST /* must define with CRDA */
^
<command-line>:0:0: note: this is the location of the previous definition
In file included from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/os/rt_linux.h:98:0,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_os.h:44,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_comm.h:75,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/rt_config.h:33,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:28:
/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/cfg80211.h:35:49: error: ‘IEEE80211_NUM_BANDS’ undeclared here (not in a function)
struct ieee80211_supported_band Cfg80211_bands[IEEE80211_NUM_BANDS];
^
/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c: In function ‘announce_802_3_packet’:
/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:341:16: warning: unused variable ‘pAd’ [-Wunused-variable]
RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)pAdSrc;
^
In file included from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_os.h:44:0,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_comm.h:75,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/rt_config.h:33,
from /home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:28:
/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c: In function ‘STA_MonPktSend’:
/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:450:35: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __FUNCTION_
^
/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/include/os/rt_linux.h:669:16: note: in definition of macro ‘DBGPRINT_RAW’
printk Fmt; \
^
/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:450:9: note: in expansion of macro ‘DBGPRINT’
DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __FUNCTION_
^
scripts/Makefile.build:294: recipe for target '/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.o' failed
make[2]: *** [/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.o] Error 1
Makefile:1524: recipe for target '_module_/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux' failed
make[1]: *** [_module_/home/dusan/src/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.10.0-27-generic'
Makefile:403: recipe for target 'LINUX' failed
make: *** [LINUX] Error 2

[dusan2021]

ok skusim ... len este jedna otazka k tomu bude sa potom dat prejst spat na 4.10 s tym aby mi stale fungoval alebo budem musiet zostat u 4.4 ?

[West]

Ak myslis TP-LINK AC600 (ARCHER T2UH, tak ten firemny ovladac som poopravoval a funguje mi od jadra 2.18 az po jadro 4.11 (Fedora24), zatial iba tak, ze nespolupracuje s NetworkManagerom. Nastavujem ho pomocou prikazov iwconfig, iwpriv, ip. Pokial to nevadi mozem poskytnut.

[dusan2021]

nie UH iba U
tento mam ja
http://cz.tp-link.com/products/details/ ... r-T2U.html

[dusan2021]

pocas make mi vypisuje neake chyby v zdrojovom kode a nakonci mi vypisalo tuto chybu :

Makefile:393: recipe for target 'LINUX' failed
make: *** [LINUX] Error 2

nasledne preto mi nechce dalej instalovat
pripadne ak by si sa do toho vyznal ako programator mozem ti poslat vypis terminalu ze by sme sa dohodli a by si to opravil aby mi to slo ?

[West]

Opraveny ovladac pre tento wifi adapter od inych autorov najdes v popise ku koncu stranky.
https://superuser.com/questions/738096/ ... 860-driver
Vyskusaj ci nebudu nahodou opravene lepsie aspon tak, aby sa dali skompilovat bez Error.

[dusan2021]

cauko sory ze pisem az teraz skor sa mi nedalo ... bohuzial ani tato moznost mi nefunguje :/ stale mi vypisuje to iste

[West]

Tento ovladac je mozne skompilovat na Linux "Mint18.2 Mate" jadro 4.8.0-53 generic
https://github.com/ulli-kroll/mt7610u
Neskusal som ako funguje s hardware (wifi adapterom)