Linux jan-1001PXD 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:19:42 UTC 2013 i686 i686 i686 GNU/Linux
Kód: Vybrat vše
[20066.856374] hub 1-0:1.0: unable to enumerate USB device on port 1
[20067.276134] hub 1-0:1.0: unable to enumerate USB device on port 1
[20067.472135] hub 2-0:1.0: unable to enumerate USB device on port 1
[20067.656345] hub 1-0:1.0: unable to enumerate USB device on port 1
[20068.044113] usb 1-1: new high-speed USB device number 64 using ehci-pci
[20069.240365] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[20069.684130] hub 2-0:1.0: unable to enumerate USB device on port 1
[20070.072176] hub 1-0:1.0: unable to enumerate USB device on port 1
[20070.556155] hub 1-0:1.0: unable to enumerate USB device on port 1
[20071.008130] hub 1-0:1.0: unable to enumerate USB device on port 1
[20071.524153] hub 1-0:1.0: unable to enumerate USB device on port 1
[20072.416127] hub 1-0:1.0: unable to enumerate USB device on port 1
[20073.384134] hub 1-0:1.0: unable to enumerate USB device on port 1
[20073.636096] usb 2-1: new full-speed USB device number 106 using uhci_hcd
[20073.704136] hub 2-0:1.0: unable to enumerate USB device on port 1
[20074.124145] hub 1-0:1.0: unable to enumerate USB device on port 1
[20074.376083] usb 2-1: new full-speed USB device number 107 using uhci_hcd
[20075.016101] usb 2-1: device not accepting address 107, error -71
[20075.072152] hub 2-0:1.0: unable to enumerate USB device on port 1
[20075.460127] hub 1-0:1.0: unable to enumerate USB device on port 1
[20076.104138] hub 1-0:1.0: unable to enumerate USB device on port 1
[20076.300133] hub 2-0:1.0: unable to enumerate USB device on port 1
[20077.360148] usb 2-1: new full-speed USB device number 110 using uhci_hcd
[20077.428136] hub 2-0:1.0: unable to enumerate USB device on port 1
[20078.268139] hub 1-0:1.0: unable to enumerate USB device on port 1
[20078.520140] usb 2-1: new full-speed USB device number 111 using uhci_hcd
[20078.588164] hub 2-0:1.0: unable to enumerate USB device on port 1
[20079.020157] hub 1-0:1.0: unable to enumerate USB device on port 1
[20079.272097] usb 2-1: new full-speed USB device number 112 using uhci_hcd
[20079.944089] usb 2-1: device not accepting address 112, error -71
[20080.000165] hub 2-0:1.0: unable to enumerate USB device on port 1
[20080.572159] hub 2-0:1.0: unable to enumerate USB device on port 1
[20081.264105] usb 2-1: new full-speed USB device number 115 using uhci_hcd
[20081.432145] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20081.432161] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20083.456162] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[20083.456188] usb 2-1: USB disconnect, device number 115
[20083.648139] hub 2-0:1.0: unable to enumerate USB device on port 1
[20084.260140] hub 1-0:1.0: unable to enumerate USB device on port 1
[20085.208107] usb 2-1: new full-speed USB device number 117 using uhci_hcd
[20085.356094] usb 2-1: device descriptor read/all, error -71
[20085.412148] hub 2-0:1.0: unable to enumerate USB device on port 1
[20086.104123] usb 2-1: new full-speed USB device number 119 using uhci_hcd
[20086.273133] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20086.273149] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20087.424153] usb 2-1: USB disconnect, device number 119
[20088.348128] hub 2-0:1.0: unable to enumerate USB device on port 1
[20089.104115] usb 2-1: new full-speed USB device number 121 using uhci_hcd
[20089.272134] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20089.272150] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20125.864156] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[20125.864182] usb 2-1: USB disconnect, device number 121
[20126.052149] hub 2-0:1.0: unable to enumerate USB device on port 1
[20126.884101] usb 2-1: new full-speed USB device number 123 using uhci_hcd
[20127.052140] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20127.052156] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20130.328147] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[20130.328172] usb 2-1: USB disconnect, device number 123
[20131.092099] usb 2-1: new full-speed USB device number 124 using uhci_hcd
[20131.259147] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20131.259163] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20132.312141] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[20132.312166] usb 2-1: USB disconnect, device number 124
[20132.868144] hub 1-0:1.0: unable to enumerate USB device on port 1
[20133.964330] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[20134.408153] hub 2-0:1.0: unable to enumerate USB device on port 1
[20135.600274] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[20136.304115] usb 2-1: new full-speed USB device number 126 using uhci_hcd
[20136.372139] hub 2-0:1.0: unable to enumerate USB device on port 1
[20137.328142] hub 1-0:1.0: unable to enumerate USB device on port 1
[20137.580097] usb 2-1: new full-speed USB device number 127 using uhci_hcd
[20137.856143] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20137.856159] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20140.568134] usb 2-1: USB disconnect, device number 127
[20141.084126] hub 1-0:1.0: unable to enumerate USB device on port 1
[20141.336094] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[20141.644146] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20141.644161] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20614.546395] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.548059] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.551106] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.552683] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.555756] ehci-pci 0000:00:1d.7: port 1 reset error -110
[20614.555780] hub 1-0:1.0: hub_port_status failed (err = -32)
[20614.960417] hub 1-0:1.0: unable to enumerate USB device on port 1
[20615.476170] usb 2-1: USB disconnect, device number 2
[20615.724119] usb 2-1: new full-speed USB device number 3 using uhci_hcd
[20615.890419] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[20615.890435] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20618.392169] usb 2-1: USB disconnect, device number 3
[20620.448123] usb 1-1: new high-speed USB device number 97 using ehci-pci
[20621.056129] hub 1-0:1.0: unable to enumerate USB device on port 1
[21179.016130] hub 1-0:1.0: unable to enumerate USB device on port 1
[21179.212142] hub 2-0:1.0: unable to enumerate USB device on port 1
[21180.252258] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21180.696159] hub 2-0:1.0: unable to enumerate USB device on port 1
[21181.084157] hub 1-0:1.0: unable to enumerate USB device on port 1
[21183.528391] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21183.972127] hub 2-0:1.0: unable to enumerate USB device on port 1
[21194.772149] hub 1-0:1.0: unable to enumerate USB device on port 1
[21195.024090] usb 2-1: new full-speed USB device number 7 using uhci_hcd
[21195.231131] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21195.231147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21201.192139] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21201.192159] usb 2-1: USB disconnect, device number 7
[21201.388142] hub 2-0:1.0: unable to enumerate USB device on port 1
[21201.776128] hub 1-0:1.0: unable to enumerate USB device on port 1
[21204.324282] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21204.768162] hub 2-0:1.0: unable to enumerate USB device on port 1
[21205.768357] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21206.212150] hub 2-0:1.0: unable to enumerate USB device on port 1
[21207.012120] hub 1-0:1.0: unable to enumerate USB device on port 1
[21207.208158] hub 2-0:1.0: unable to enumerate USB device on port 1
[21208.208269] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21212.076131] hub 1-0:1.0: unable to enumerate USB device on port 1
[21214.936149] hub 1-0:1.0: unable to enumerate USB device on port 1
[21216.604393] hub 1-0:1.0: unable to enumerate USB device on port 1
[21217.636313] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21218.080159] hub 2-0:1.0: unable to enumerate USB device on port 1
[21218.876164] hub 1-0:1.0: unable to enumerate USB device on port 1
[21220.360144] hub 1-0:1.0: unable to enumerate USB device on port 1
[21220.812125] hub 1-0:1.0: unable to enumerate USB device on port 1
[21221.928140] hub 1-0:1.0: unable to enumerate USB device on port 1
[21222.180119] usb 2-1: new full-speed USB device number 13 using uhci_hcd
[21222.347123] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21222.347139] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21227.480167] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21227.480193] usb 2-1: USB disconnect, device number 13
[21228.468130] hub 1-0:1.0: unable to enumerate USB device on port 1
[21229.564265] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21229.824139] hub 1-0:1.0: unable to enumerate USB device on port 1
[21230.856344] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21231.300162] hub 2-0:1.0: unable to enumerate USB device on port 1
[21232.332293] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21232.776171] hub 2-0:1.0: unable to enumerate USB device on port 1
[21233.164129] hub 1-0:1.0: unable to enumerate USB device on port 1
[21234.196353] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21234.456137] hub 1-0:1.0: unable to enumerate USB device on port 1
[21237.580107] usb 2-1: new full-speed USB device number 16 using uhci_hcd
[21237.749131] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21237.749147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21241.368153] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21241.368179] usb 2-1: USB disconnect, device number 16
[21241.560165] hub 2-0:1.0: unable to enumerate USB device on port 1
[21242.784299] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21243.228134] hub 2-0:1.0: unable to enumerate USB device on port 1
[21244.228373] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21244.672161] hub 2-0:1.0: unable to enumerate USB device on port 1
[21245.672321] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21246.116149] hub 2-0:1.0: unable to enumerate USB device on port 1
[21247.116283] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21247.560133] hub 2-0:1.0: unable to enumerate USB device on port 1
[21248.560338] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21249.004194] hub 2-0:1.0: unable to enumerate USB device on port 1
[21250.004294] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21250.504121] usb 2-1: new full-speed USB device number 23 using uhci_hcd
[21250.672118] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21250.672135] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21262.696160] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21262.696178] usb 2-1: USB disconnect, device number 23
[21262.892168] hub 2-0:1.0: unable to enumerate USB device on port 1
[21263.892302] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21264.336120] hub 2-0:1.0: unable to enumerate USB device on port 1
[21265.336390] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21265.780137] hub 2-0:1.0: unable to enumerate USB device on port 1
[21266.780324] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21267.224156] hub 2-0:1.0: unable to enumerate USB device on port 1
[21268.224276] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21268.668133] hub 2-0:1.0: unable to enumerate USB device on port 1
[21269.340097] usb 2-1: new full-speed USB device number 29 using uhci_hcd
[21269.509133] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21269.509148] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21270.880158] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21270.880182] usb 2-1: USB disconnect, device number 29
[21271.068139] hub 2-0:1.0: unable to enumerate USB device on port 1
[21272.112263] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[21272.372126] hub 1-0:1.0: unable to enumerate USB device on port 1
[21272.568144] hub 2-0:1.0: unable to enumerate USB device on port 1
[21272.956148] hub 1-0:1.0: unable to enumerate USB device on port 1
[21273.484164] hub 1-0:1.0: unable to enumerate USB device on port 1
[21274.032132] hub 1-0:1.0: unable to enumerate USB device on port 1
[21274.584152] hub 1-0:1.0: unable to enumerate USB device on port 1
[21275.448097] usb 2-1: new full-speed USB device number 32 using uhci_hcd
[21275.617133] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21275.617149] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21276.088167] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[21276.088192] usb 2-1: USB disconnect, device number 32
[21276.276140] hub 2-0:1.0: unable to enumerate USB device on port 1
[21277.072128] hub 1-0:1.0: unable to enumerate USB device on port 1
[21277.968187] hub 1-0:1.0: unable to enumerate USB device on port 1
[21278.548148] hub 1-0:1.0: unable to enumerate USB device on port 1
[21279.672149] hub 1-0:1.0: unable to enumerate USB device on port 1
[21280.764117] hub 1-0:1.0: unable to enumerate USB device on port 1
[21281.940169] hub 1-0:1.0: unable to enumerate USB device on port 1
[21283.636142] hub 1-0:1.0: unable to enumerate USB device on port 1
[21285.360133] hub 1-0:1.0: unable to enumerate USB device on port 1
[21286.608136] hub 1-0:1.0: unable to enumerate USB device on port 1
[21288.256094] usb 2-1: new full-speed USB device number 34 using uhci_hcd
[21288.425132] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21288.425147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21293.944157] usb 2-1: USB disconnect, device number 34
[21294.472112] hub 1-0:1.0: unable to enumerate USB device on port 1
[21296.196110] usb 2-1: new full-speed USB device number 35 using uhci_hcd
[21296.363141] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21296.363156] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21297.264146] usb 2-1: USB disconnect, device number 35
[21297.508092] usb 2-1: new full-speed USB device number 36 using uhci_hcd
[21297.674092] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[21297.674108] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21302.049747] wlan0: authenticate with a0:f3:c1:69:66:2e
[21302.061437] wlan0: send auth to a0:f3:c1:69:66:2e (try 1/3)
[21302.063853] wlan0: authenticated
[21302.068079] wlan0: associate with a0:f3:c1:69:66:2e (try 1/3)
[21302.072605] wlan0: RX AssocResp from a0:f3:c1:69:66:2e (capab=0x431 status=0 aid=4)
[21302.072872] wlan0: associated
[21302.072997] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[21302.073226] cfg80211: Calling CRDA for country: CZ
[21302.401097] ath: regdomain 0x80cb updated by CountryIE
[21302.401105] ath: EEPROM regdomain: 0x80cb
[21302.401109] ath: EEPROM indicates we should expect a country code
[21302.401113] ath: doing EEPROM country->regdmn map search
[21302.401117] ath: country maps to regdmn code: 0x36
[21302.401122] ath: Country alpha2 being used: CZ
[21302.401125] ath: Regpair used: 0x36
[21302.401171] cfg80211: Regulatory domain changed to country: CZ
[21302.401175] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[21302.401181] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[21302.401185] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[21302.401190] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[21302.401195] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[21307.777507] asus_wmi: Unknown key 58 pressed
[21671.546102] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[21671.549362] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[21693.722600] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[21801.734562] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[21834.457163] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[21917.157534] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[22126.685429] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[22220.478846] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[22260.625799] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[22392.271660] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[22895.117595] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[23197.549559] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[23245.539432] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24301.451512] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[24312.931145] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24498.744545] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[24540.275302] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24633.628580] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[24637.684646] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24722.879991] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[24871.854850] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[24871.855644] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25029.554993] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[25122.834857] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25395.316808] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[25495.947115] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25503.567973] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[25622.107194] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25722.976159] usb 2-1: USB disconnect, device number 36
[25723.744120] usb 2-1: new full-speed USB device number 37 using uhci_hcd
[25723.911158] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[25723.911180] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[25865.030853] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[25865.036952] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[25868.144890] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[26054.944276] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[26165.058415] systemd-timedated[7894]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
[26170.034464] usb 1-5: USB disconnect, device number 3
[26175.084090] usb 1-5: new high-speed USB device number 53 using ehci-pci
[26175.217711] usb 1-5: New USB device found, idVendor=058f, idProduct=6366
[26175.217727] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26175.217738] usb 1-5: Product: Mass Storage Device
[26175.217747] usb 1-5: Manufacturer: Generic
[26175.217756] usb 1-5: SerialNumber: 058F63666433
[26175.218552] scsi3 : usb-storage 1-5:1.0
[26176.345174] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[26176.356389] sd 3:0:0:0: Attached scsi generic sg1 type 0
[26177.014741] sd 3:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
[26177.015842] sd 3:0:0:0: [sdb] Write Protect is off
[26177.015866] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[26177.017476] sd 3:0:0:0: [sdb] No Caching mode page present
[26177.017499] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[26177.023969] sd 3:0:0:0: [sdb] No Caching mode page present
[26177.023990] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[26177.025537] sdb: sdb1
[26177.034068] sd 3:0:0:0: [sdb] No Caching mode page present
[26177.034082] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[26177.034095] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[26542.135025] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[26542.138585] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[26652.544183] usb 2-1: USB disconnect, device number 37
[26652.792133] usb 2-1: new full-speed USB device number 38 using uhci_hcd
[26652.958348] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[26652.958364] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[26661.700396] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[26757.696153] usb 2-1: USB disconnect, device number 38
[26757.940097] usb 2-1: new full-speed USB device number 39 using uhci_hcd
[26758.107620] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[26758.107636] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[26822.642367] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[26834.793132] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[26923.302052] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[26953.886187] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27151.464219] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27170.325483] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27267.558510] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27271.131798] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27345.402043] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27357.112438] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27505.786390] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27852.295205] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[27944.663015] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[27953.080811] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[28157.390496] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[28170.149486] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[28449.305264] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[28467.856147] usb 2-1: USB disconnect, device number 39
[28468.688211] usb 2-1: new full-speed USB device number 40 using uhci_hcd
[28468.856155] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28468.856174] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28489.416649] usb 2-1: USB disconnect, device number 40
[28490.180144] usb 2-1: new full-speed USB device number 41 using uhci_hcd
[28490.352170] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28490.352193] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28491.712260] usb 2-1: USB disconnect, device number 41
[28491.952101] usb 2-1: new full-speed USB device number 42 using uhci_hcd
[28492.123099] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28492.123113] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28494.376158] usb 2-1: USB disconnect, device number 42
[28494.904144] hub 1-0:1.0: unable to enumerate USB device on port 1
[28495.156234] usb 2-1: new full-speed USB device number 43 using uhci_hcd
[28495.359176] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28495.359192] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28568.776283] usb 2-1: USB disconnect, device number 43
[28569.540125] usb 2-1: new full-speed USB device number 44 using uhci_hcd
[28569.707199] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28569.707220] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28718.157920] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[28771.392122] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[28771.392139] usb 2-1: USB disconnect, device number 44
[28771.584160] hub 2-0:1.0: unable to enumerate USB device on port 1
[28772.380146] hub 1-0:1.0: unable to enumerate USB device on port 1
[28772.632175] usb 2-1: new full-speed USB device number 46 using uhci_hcd
[28772.800171] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[28772.800184] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28825.771149] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[28847.945987] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[28967.365885] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[28977.881028] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[29084.802448] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[29129.436863] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[29133.086159] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[29266.661106] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[29266.661245] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[29280.950674] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[29369.334143] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[29374.983429] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[29595.482771] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[30016.899111] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[30253.126378] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[30258.377776] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[30301.552138] usb 2-1: USB disconnect, device number 46
[30302.340124] usb 2-1: new full-speed USB device number 47 using uhci_hcd
[30302.508132] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30302.508156] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30307.132146] usb 2-1: USB disconnect, device number 47
[30307.384458] usb 2-1: new full-speed USB device number 48 using uhci_hcd
[30307.550919] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30307.550933] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30324.616274] usb 2-1: USB disconnect, device number 48
[30326.064431] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[30326.304867] hub 2-0:1.0: unable to enumerate USB device on port 1
[30327.080187] hub 2-0:1.0: unable to enumerate USB device on port 1
[30328.060164] hub 2-0:1.0: unable to enumerate USB device on port 1
[30328.836646] hub 2-0:1.0: unable to enumerate USB device on port 1
[30329.632170] hub 1-0:1.0: unable to enumerate USB device on port 1
[30329.884273] usb 2-1: new full-speed USB device number 53 using uhci_hcd
[30330.150345] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30330.150367] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30332.056209] usb 2-1: USB disconnect, device number 53
[30333.232126] usb 2-1: new full-speed USB device number 54 using uhci_hcd
[30333.300119] hub 2-0:1.0: unable to enumerate USB device on port 1
[30334.096221] hub 1-0:1.0: unable to enumerate USB device on port 1
[30335.032167] hub 1-0:1.0: unable to enumerate USB device on port 1
[30335.412134] usb 2-1: new full-speed USB device number 55 using uhci_hcd
[30335.624227] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30335.624241] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30600.144162] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[30600.144189] usb 2-1: USB disconnect, device number 55
[30601.036245] usb 2-1: new full-speed USB device number 56 using uhci_hcd
[30601.205135] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[30601.205148] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31128.195132] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[31292.604072] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[31292.609295] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[31294.019239] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[31455.674608] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[31672.426892] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[31773.928175] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[31773.928197] usb 2-1: USB disconnect, device number 56
[31775.116128] usb 2-1: new full-speed USB device number 57 using uhci_hcd
[31775.283112] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[31775.283122] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31844.892380] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[31900.222003] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[32292.247148] systemd-hostnamed[11365]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[32827.331493] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[32830.989141] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[33199.432199] usb 2-1: USB disconnect, device number 57
[33200.420118] usb 2-1: new full-speed USB device number 58 using uhci_hcd
[33200.586541] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[33200.586557] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[33385.657468] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[33426.286155] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[33434.070988] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[33482.038631] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[33530.040189] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[33552.752663] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[33552.752776] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[33859.186320] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[33878.952135] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[33878.952154] usb 2-1: USB disconnect, device number 58
[33885.424264] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[33885.868131] hub 2-0:1.0: unable to enumerate USB device on port 1
[33886.868338] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[33887.312127] hub 2-0:1.0: unable to enumerate USB device on port 1
[33887.924158] hub 1-0:1.0: unable to enumerate USB device on port 1
[33889.581255] hub 1-0:1.0: unable to enumerate USB device on port 1
[33889.832135] usb 2-1: new full-speed USB device number 61 using uhci_hcd
[33890.196139] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[33890.196153] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[34140.605500] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[34173.055976] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[34400.307685] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35253.900492] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[35253.901280] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35352.830008] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[35442.471444] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35519.233090] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[35643.119652] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35757.335521] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[35987.376371] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35991.453277] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[36073.943754] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[36121.325193] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[36260.499821] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[36262.060196] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[36366.527666] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[36714.808829] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[36840.971001] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[36868.052916] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37039.605867] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37088.112198] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[37159.726671] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[37214.426927] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37322.124467] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37366.024944] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37370.097731] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[37418.048168] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[37466.040219] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[37502.640926] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37502.641038] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[37679.915581] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37852.265656] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37853.029343] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[37927.425104] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[37940.267822] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38086.467590] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38180.383318] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38263.628563] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38278.505287] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38372.341289] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38534.873313] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38642.780324] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38798.098556] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38879.666215] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[38883.994920] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[38970.260218] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[39000.382633] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[39113.867862] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[39133.589053] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[39207.816976] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[39252.868151] usb 1-3: new high-speed USB device number 83 using ehci-pci
[39253.006626] usb 1-3: New USB device found, idVendor=0b05, idProduct=1779
[39253.006641] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[39253.006652] usb 1-3: Product: AF9035A USB Device
[39253.006662] usb 1-3: Manufacturer: Afa Technologies Inc.
[39253.006671] usb 1-3: SerialNumber: CT701A024900378
[39253.794484] usbcore: registered new interface driver dvb_usb_af9035
[39253.794757] usb 1-3: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state
[39253.862168] usb 1-3: dvb_usb_v2: Did not find the firmware file 'dvb-usb-af9035-02.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[39253.862184] usb 1-3: dvb_usb_v2: 'Asus U3100Mini Plus' error while loading driver (-2)
[39253.862209] usb 1-3: dvb_usb_v2: 'Asus U3100Mini Plus' successfully deinitialized and disconnected
[39253.929342] usbcore: registered new interface driver usbhid
[39253.929352] usbhid: USB HID core driver
[39253.977366] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input10
[39253.977800] hid-generic 0003:0B05:1779.0001: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:1d.7-3/input1
jan@jan-1001PXD ~ $