Grafická karta ATI a TV Samsung

Problémy a zkušenosti s hardwarem, perifériemi a jejich ovladači
Zamčeno
Zpráva
Autor
petr
Příspěvky: 42
Registrován: 02 lis 2012, 05:25

Grafická karta ATI a TV Samsung

#1 Příspěvek od petr »

Mám LM16 64 a Grafiku RV610 Radeon HD 2400 PRO.
Připojení na TV mám přes VGA kabel v režimu PC. TV má nastavení 16:9 a je funkční.
Menu Displej zobrazuje neznámý typ a rozlišení 1024x768 4:3. Nic jiného nelze nastavit.
Video v VLC, nebo SMPlayer je ale v zobrazení 4:3, což znamená černé pruhy nahoře a dole pro film kódovaný v 16:9.
Další HW ovladače nejsou přístupné, ani DDM volba nic nemá .
Dají se někde stáhnout příslušné ovladače grafiky?
Poraďte prosím, jak vyřešit tento problém se zobrazováním.

kamowski

Re: Grafická karta ATI a TV Samsung

#2 Příspěvek od kamowski »

na tejto stránke si to skús naklikať:
http://support.amd.com/en-us/download
a nainštalovať catalyst

petr
Příspěvky: 42
Registrován: 02 lis 2012, 05:25

Re: Grafická karta ATI a TV Samsung

#3 Příspěvek od petr »

Děkuji za nabídku catalystu, ale bylo to neúspěšné.

Omlouvám se za chybné zadání, ale LM16 mi zobrazil chybná data o grafické kartě.
Po rozebrání PC jsem zjistil, že gragika není ATI, ale GeForce a to Asus 210 Silent.
Mint chybně detekoval kartu a přepnul se do VGA modu. To je pak důsledek chyb.

Potřeboval bych napravit chybnou autodetekci a změnit parametry na skutečné, jenže nevím jak.
nvidia settings nefunguje. Poraďte prosím.

menom
Příspěvky: 2781
Registrován: 12 pro 2012, 15:10

Re: Grafická karta ATI a TV Samsung

#4 Příspěvek od menom »

Graficku kartu zistime, ked do Terminalu zadas prikaz:

Kód: Vybrat vše

sudo lspci -v
A okopirujes sem cely odstavec, kde sa pise o VGA compatible controller.
.

petr
Příspěvky: 42
Registrován: 02 lis 2012, 05:25

Re: Grafická karta ATI a TV Samsung

#5 Příspěvek od petr »

Provedl jsem.

# sudo lspci -v
00:00.0 Memory controller: NVIDIA Corporation CK804 Memory Controller (rev a3)
Subsystem: ASUSTeK Computer Inc. A8N Series Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 ISA bridge: NVIDIA Corporation CK804 ISA Bridge (rev f3)
Subsystem: ASUSTeK Computer Inc. K8N4/A8N Series Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus: NVIDIA Corporation CK804 SMBus (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4/A8N Series Mainboard
Flags: 66MHz, fast devsel, IRQ 11
I/O ports at fc00
I/O ports at 4c00
I/O ports at 4c40
Capabilities: [44] Power Management version 2
Kernel driver in use: nForce2_smbus

00:02.0 USB controller: NVIDIA Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4/A8N Series Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fe02f000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci-pci

00:02.1 USB controller: NVIDIA Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N4/A8N Series Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at feb00000 (32-bit, non-prefetchable)
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci-pci

00:06.0 IDE interface: NVIDIA Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N4/A8N Series Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable)
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at f000
Capabilities: [44] Power Management version 2
Kernel driver in use: pata_amd

00:07.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N Series Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at dc00 [size=16]
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: sata_nv

00:08.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N4/A8N Series Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
I/O ports at 09e0 [size=8]
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at c800 [size=16]
Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: sata_nv

00:09.0 PCI bridge: NVIDIA Corporation CK804 PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdf00000-fdffffff

00:0a.0 Bridge: NVIDIA Corporation CK804 Ethernet Controller (rev f3)
Subsystem: ASUSTeK Computer Inc. Device 812a
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
I/O ports at c400 [size=8]
Capabilities: [44] Power Management version 2
Kernel driver in use: forcedeth

00:0b.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: [40] Power Management version 2
Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: pcieport

00:0c.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: [40] Power Management version 2
Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: pcieport

00:0d.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: fde00000-fdefffff
Capabilities: [40] Power Management version 2
Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: pcieport

00:0e.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [40] Power Management version 2
Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: pcieport

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp

01:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Motherboard
Flags: bus master, medium devsel, latency 32, IRQ 17
Memory at fdfff000 (32-bit, non-prefetchable) [size=2K]
I/O ports at bc00 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: firewire_ohci

01:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs SBLive! 5.1 Model SB0100
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at b800 [size=32]
Capabilities: [dc] Power Management version 1
Kernel driver in use: snd_emu10k1

01:07.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at b400 [size=8]
Capabilities: [dc] Power Management version 1
Kernel driver in use: Emu10k1_gameport

04:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI])
Subsystem: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at fdefe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Latency Tolerance Reporting
Kernel driver in use: xhci_hcd

05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 01c2
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fdde0000 (64-bit, non-prefetchable) [size=64K]
I/O ports at ac00 [size=256]
Expansion ROM at fddc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: radeon

05:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV610 HDMI Audio [Radeon HD 2350/2400 Series]
Subsystem: ASUSTeK Computer Inc. Device aa10
Flags: bus master, fast devsel, latency 0, IRQ 48
Memory at fddfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: snd_hda_intel

menom
Příspěvky: 2781
Registrován: 12 pro 2012, 15:10

Re: Grafická karta ATI a TV Samsung

#6 Příspěvek od menom »

05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 01c2
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at d0000000 (64-bit, prefetchable)
Memory at fdde0000 (64-bit, non-prefetchable)
I/O ports at ac00
Expansion ROM at fddc0000 [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: radeon

Podla tohto mas Radeon HD 2400 PRO -
Este som nepocul ze by karta od nvidie mohla byt takto detekovana.
Nemas tam 2 graficke karty ?
Neni ten Radeon integrovany na Zakladnej doske, aky ma motherboard chipset (AMD) ?

Podivaj sa ci neni Nvidia vypnuta v BIOSe.
.

petr
Příspěvky: 42
Registrován: 02 lis 2012, 05:25

Re: Grafická karta ATI a TV Samsung

#7 Příspěvek od petr »

Našel jsem odpověď na mou otázku.

Vinu na rozlišení obrazovky měl kabel. Na původním, klasickém monitoru 4:3 byl VGA kabel zdánlivě vpořádku. Použitím jiného kabelu, patrně obsahujícího všechny piny zapojené, se rozlišení hned od startu Mintu nastavilo na 16:9, dle TV Samsung. Rovněž ve výpisu menu Displeje je již správná hodnota 1920x1080 16:9.
Děkuji za spoluúčast na mém trápení s ovladači.

Teď k předchozímu dotazu na Radeon. V PC mám MB bez integrované grafické karty. Ve výpisu # sudo lspci -v
je jednoznačně chybná definice Mintu na Radeon. Možná chyba pouze ve výpisu, ale funkčně je tam GeForce, jak se zobrazuje nForce při studeném startu s výpisem typu MB a grafiky. Chybička se vloudí, že ano.

Problém kabeláže je podobný i s HDMI. Levné kabely také fungují jen napůl. (zvuk)

menom
Příspěvky: 2781
Registrován: 12 pro 2012, 15:10

Re: Grafická karta ATI a TV Samsung

#8 Příspěvek od menom »

Ve výpisu # sudo lspci -v
je jednoznačně chybná definice Mintu na Radeon.
Ak vyskusas spustit ine linuxove systemy ako LiveCD a v terminali vo vypise bude zobrazena ta graficka karta spravne,

potom by to bol problem Linux Mintu, keby povedzme na inych Operacnych systemoch bola GK detekovana spravne ako hovoris ty (nvidia).

Pokial to nevyskusas a nepodlozis vypismi z Terminalu, tak je to len tvoje tvrdenie.
.

Zamčeno