Ahoj Alfisko,
díky za predchádzajúce info, mal som to trošku sťažené, lebo som vymknutý z wifi a nemal som iný NB. Skúsil som najprv automatické pripojenie, potom manuálne, ale tam som skončil pri nastavovaní IPv6 nastavení. Dávam tu celý postup a aj dostupné info:
Wifi vypnutá, kábel zapojeý do LAN1, toto vyhodilo po zadaní príkazov:
**********
inxi -F
System:
Host: xxxxxxxxxx Kernel: 5.4.0-81-generic x86_64 bits: 64
Desktop: Cinnamon 5.0.5 Distro: Linux Mint 20.2 Uma
Machine:
Type: Laptop System: Wortmann_AG product: TERRA_MOBILE_1529H v: N/A
serial: <superuser/root required>
Mobo: Clevo model: W550SU1 serial: <superuser/root required>
UEFI: American Megatrends v: 4.6.5 date: 11/26/2013
Battery:
ID-1: BAT0 charge: 25.5 Wh condition: 25.5/62.2 Wh (41%)
CPU:
Topology: Dual Core model: Intel Core i5-4200M bits: 64 type: MT MCP
L2 cache: 3072 KiB
Speed: 798 MHz min/max: 800/3100 MHz Core speeds (MHz): 1: 798 2: 798
3: 799 4: 798
Graphics:
Device-1: Intel 4th Gen Core Processor Integrated Graphics driver: i915
v: kernel
Display: x11 server: X.Org 1.20.11 driver: modesetting
unloaded: fbdev,vesa resolution: 1366x768~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 4600 (HSW GT2)
v: 4.5 Mesa 21.0.3
Audio:
Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio
driver: snd_hda_intel
Device-2: Intel 8 Series/C220 Series High Definition Audio
driver: snd_hda_intel
Sound Server: ALSA v: k5.4.0-81-generic
Network:
Device-1: Intel Wireless 3160 driver: iwlwifi
IF: wlp2s0 state: down mac: a0:88:69:62:a3:6d
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: enp3s0f1 state: up speed: 1000 Mbps duplex: full
mac: 00:90:f5:f5:4a:19
Drives:
Local Storage: total: 232.89 GiB used: 45.20 GiB (19.4%)
ID-1: /dev/sda vendor: Samsung model: SSD 840 EVO 250GB size: 232.89 GiB
Partition:
ID-1: / size: 226.04 GiB used: 44.70 GiB (19.8%) fs: ext4 dev: /dev/dm-1
ID-2: /boot size: 704.5 MiB used: 508.1 MiB (72.1%) fs: ext4
dev: /dev/sda2
ID-3: swap-1 size: 976.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-2
Sensors:
System Temperatures: cpu: 48.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 216 Uptime: 4d 1h 12m Memory: 7.70 GiB used: 3.40 GiB (44.1%)
Shell: bash inxi: 3.0.38
***************************************
dhclient -v
Internet Systems Consortium DHCP Client 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit
https://www.isc.org/software/dhcp/
can't create /var/lib/dhcp/dhclient.leases: Permission denied
RTNETLINK answers: Operation not permitted
RTNETLINK answers: Operation not permitted
Open a socket for LPF: Operation not permitted
If you think you have received this message due to a bug rather
than a configuration issue please read the section on submitting
bugs on either our web page at
www.isc.org or in the README file
before submitting a bug. These pages explain the proper
process and the information we find helpful for debugging.
Exiting.
************************
nmcli (ano, funguje aj v minte)
enp3s0f1: pripojené to Drôtové pripojenie 1
"Realtek RTL8111/8168/8411"
ethernet (r8169), 00:90:F5:F5:4A:19, hw, mtu 1500
ip4 default
inet4 192.168.1.11/24
route4 0.0.0.0/0
route4 192.168.1.0/24
route4 169.254.0.0/16
inet6 fe80::56fc:4391:54ca:da25/64
route6 fe80::/64
wlp2s0: nedostupné
"Intel 3160"
wifi (iwlwifi), A0:88:69:62:A3:6D, sw disabled, hw, mtu 1500
p2p-dev-wlp2s0: nedostupné
"p2p-dev-wlp2s0"
wifi-p2p, sw disabled, hw
lo: nespravované
"lo"
loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536
*******************************
odpojená wifi
skúsime najprv automatické pripojenie,
drôtové pripojenie 1
stav:
IPv4: 192.168.1.11
Ipv: fe80::56fc:4391:54ca:da25
hard. Adresa: 00:90:F5:F5:4A:19
Predvolené smerovanie: 192.168.1.1
DNS: 192.168.1.1
bezpečnosť: vypnuté
Totožnosť:
názov: Drôtové prpipojenie1
MAC: 00:90:F5:F5:4A:19 (enp3s0f1)
klonovaná: 00:90:F5:F5:4A:19
MTU: automatik
Pripojiť automaticky a sprístupniť ostatným používateľom – ano, ano
IPv4:
Adresy: Zistiť automaticky (DhCP)
DNS:automaticky
Smerovania: automaticky
Všetky kolonky sú prázdne / Použiť toto pripojenie iba na zdroje v jeho sieti – zapnuté
IPv6:
adresy: automatic (DHCP only) ostatné to isté ako pri IPv4
variant 2
Adresy: automatic
variant 3 a 4
Použiť toto pripojenie iba na zdroje v jeho sieti – vypnuté - (automatic a automatic only DHCP)
Výsledok = negatívny
***************************
manuálna konfigurácia cez rozšírené nastavenia:
všeobecné: všetci uživatelia a pripojiť automaticky – ano, ano
ethernet:
zariadenie: enp3s0f1 (00:90:F5:F5:4A:19)
klonovaná MAC: 00:90:F5:F5:4A:19
MTU: automaticky
prebudenie pomocou LAN: predvolené
Link negotiation: automaticky
zaezpečnie / DCB / proxy : vypnuté
IPv4:
metóda: ručne
adresy:
adresa: 192.168.1.11 / maska podsiete: 255.255.255.0 / brána: 192.168.1.1
Servery DNS / domény hľadania – prázdne / vyžadované adresovanie IPv4 – OFF
IPv6
ručne
adresy:
adresa: fe80::56fc:4391:54ca:da25 / prefix: / brána:
tu som skončil, nie som si istý čo tam zadať a ani mi tam nešlo vpisovať nič okrem čísiel
***********
ešte som zadal:
sudo ifconfig enp3s0f1 up
nič sa nestalo, potom som omylom zadal bez „up“
sudo ifconfig enp3s0f1
enp3s0f1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.11 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::56fc:4391:54ca:da25 prefixlen 64 scopeid 0x20<link>
ether 00:90:f5:f5:4a:19 txqueuelen 1000 (Ethernet)
RX packets 511 bytes 49148 (49.1 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 332 bytes 35834 (35.8 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
-**********************
ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
ping: sendmsg: Operácia nie je povolená
asi som už spomínal, mám aj statickú IP, ale s prístupom k routru by to nemalo mať nič spoločné. Router je Sagecom 5670