Okamžité probuzení po uspání do paměti

[tornadocd]

Řeším zajímavý problém s takovouto kombinací:

Deska Gigabite B550 Elite V2, Ryzen 5700X, Geforce RTX 2070 Super, 16GB Ram + 128 M.2 SATA Sandisk 128GB
Boot Live USB Mint Cinnamon 21.1.
Nabootuju z USB, dám uspat do paměti. Uspí se a po pohybu myší se probudí. Funguje jak má. Udělám čistou instalaci na M.2 disk. Dám uspat do paměti, opět uspím a po pohybu myší se probudí. Opět plná funkčnost uspání a probuzení.

Stejná konfikurace ale vyměním M.2 SATA disk za rychlý FIRECUDA 530 1TB. Opět pustím stejnou Live USB Cinnamom, dám uspat a probudit myší, vše funguje. Smažu Gpartem disk, nainstaluji Mint, restartuji čerstvý systém, dám Uspat do paměti jako předtím, systém se uspí ale ihned se probudí. Přes google nevím nic najít anebo špatně pokládám otazku.

[menom]

.

V takom pripade by som nainstaloval aktualizacie a doporuceny ovladac pre nvidia graficku kartu.

.

[tornadocd]

Dal som aj aktualizacie a skusal aj povodny ovladac aj odporucany ovladac na Nvidiu. Zaujimave je ze na tom starsom M.2 som tiez dal aktualizacie aj doporuceny ovladac a tam to funguje ako ma.

[menom]

.

Mozno nainstalovat dconf-editor a skusit hladat a zmenit nastavenia ohladom spanku, suspend.

Alebo skusit ine jadro/á .

Edit: este mi napadlo, ze je moznost mrknut co pise o PM suspend terminal po zadani prikazu:

Kód: Vybrat vše

sudo dmesg

Malo by to zacinat asi takto:
PM: suspend entry (deep)

.

[tornadocd]

sudo dmesg od PM: suspend entry

• [ 37.172604] PM: suspend entry (deep)
  [ 37.176722] Filesystems sync: 0.004 seconds
  [ 37.176842] Freezing user space processes ... (elapsed 0.001 seconds) done.
  [ 37.178210] OOM killer disabled.
  [ 37.178211] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
  [ 37.178907] printk: Suspending console(s) (use no_console_suspend to debug)
  [ 37.455201] ACPI: PM: Preparing to enter system sleep state S3
  [ 38.215546] ACPI: PM: Saving platform NVS memory
  [ 38.215609] Disabling non-boot CPUs ...
  [ 38.217640] smpboot: CPU 1 is now offline
  [ 38.219926] smpboot: CPU 2 is now offline
  [ 38.222075] smpboot: CPU 3 is now offline
  [ 38.224364] smpboot: CPU 4 is now offline
  [ 38.226307] smpboot: CPU 5 is now offline
  [ 38.228236] smpboot: CPU 6 is now offline
  [ 38.230170] smpboot: CPU 7 is now offline
  [ 38.232193] smpboot: CPU 8 is now offline
  [ 38.232745] Spectre V2 : Update user space SMT mitigation: STIBP off
  [ 38.234102] smpboot: CPU 9 is now offline
  [ 38.235829] smpboot: CPU 10 is now offline
  [ 38.237545] smpboot: CPU 11 is now offline
  [ 38.239244] smpboot: CPU 12 is now offline
  [ 38.240967] smpboot: CPU 13 is now offline
  [ 38.242591] smpboot: CPU 14 is now offline
  [ 38.244300] smpboot: CPU 15 is now offline
  [ 38.245024] ACPI: PM: Low-level resume complete
  [ 38.245048] ACPI: PM: Restoring platform NVS memory
  [ 38.245256] LVT offset 0 assigned for vector 0x400
  [ 38.245772] Enabling non-boot CPUs ...
  [ 38.245813] x86: Booting SMP configuration:
  [ 38.245814] smpboot: Booting Node 0 Processor 1 APIC 0x2
  [ 38.245930] microcode: CPU1: patch_level=0x0a20120a
  [ 38.248094] ACPI: \_SB_.PLTF.C002: Found 2 idle states
  [ 38.251858] CPU1 is up
  [ 38.251881] smpboot: Booting Node 0 Processor 2 APIC 0x4
  [ 38.251981] microcode: CPU2: patch_level=0x0a20120a
  [ 38.254131] ACPI: \_SB_.PLTF.C004: Found 2 idle states
  [ 38.256861] CPU2 is up
  [ 38.256875] smpboot: Booting Node 0 Processor 3 APIC 0x6
  [ 38.257024] microcode: CPU3: patch_level=0x0a20120a
  [ 38.259182] ACPI: \_SB_.PLTF.C006: Found 2 idle states
  [ 38.259848] CPU3 is up
  [ 38.259862] smpboot: Booting Node 0 Processor 4 APIC 0x8
  [ 38.259961] microcode: CPU4: patch_level=0x0a20120a
  [ 38.262116] ACPI: \_SB_.PLTF.C008: Found 2 idle states
  [ 38.263900] CPU4 is up
  [ 38.263915] smpboot: Booting Node 0 Processor 5 APIC 0xa
  [ 38.264014] microcode: CPU5: patch_level=0x0a20120a
  [ 38.266168] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
  [ 38.267972] CPU5 is up
  [ 38.267988] smpboot: Booting Node 0 Processor 6 APIC 0xc
  [ 38.268101] microcode: CPU6: patch_level=0x0a20120a
  [ 38.270268] ACPI: \_SB_.PLTF.C00C: Found 2 idle states
  [ 38.271914] CPU6 is up
  [ 38.271929] smpboot: Booting Node 0 Processor 7 APIC 0xe
  [ 38.272031] microcode: CPU7: patch_level=0x0a20120a
  [ 38.274194] ACPI: \_SB_.PLTF.C00E: Found 2 idle states
  [ 38.276104] CPU7 is up
  [ 38.276119] smpboot: Booting Node 0 Processor 8 APIC 0x1
  [ 38.276263] microcode: CPU8: patch_level=0x0a20120a
  [ 38.278432] ACPI: \_SB_.PLTF.C001: Found 2 idle states
  [ 38.279999] Spectre V2 : Update user space SMT mitigation: STIBP always-on
  [ 38.280015] CPU8 is up
  [ 38.280040] smpboot: Booting Node 0 Processor 9 APIC 0x3
  [ 38.280154] microcode: CPU9: patch_level=0x0a20120a
  [ 38.282329] ACPI: \_SB_.PLTF.C003: Found 2 idle states
  [ 38.284007] CPU9 is up
  [ 38.284024] smpboot: Booting Node 0 Processor 10 APIC 0x5
  [ 38.284138] microcode: CPU10: patch_level=0x0a20120a
  [ 38.286310] ACPI: \_SB_.PLTF.C005: Found 2 idle states
  [ 38.288001] CPU10 is up
  [ 38.288017] smpboot: Booting Node 0 Processor 11 APIC 0x7
  [ 38.288126] microcode: CPU11: patch_level=0x0a20120a
  [ 38.290295] ACPI: \_SB_.PLTF.C007: Found 2 idle states
  [ 38.292033] CPU11 is up
  [ 38.292049] smpboot: Booting Node 0 Processor 12 APIC 0x9
  [ 38.292165] microcode: CPU12: patch_level=0x0a20120a
  [ 38.294337] ACPI: \_SB_.PLTF.C009: Found 2 idle states
  [ 38.296092] CPU12 is up
  [ 38.296107] smpboot: Booting Node 0 Processor 13 APIC 0xb
  [ 38.296231] microcode: CPU13: patch_level=0x0a20120a
  [ 38.298405] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
  [ 38.300109] CPU13 is up
  [ 38.300126] smpboot: Booting Node 0 Processor 14 APIC 0xd
  [ 38.300245] microcode: CPU14: patch_level=0x0a20120a
  [ 38.302415] ACPI: \_SB_.PLTF.C00D: Found 2 idle states
  [ 38.304160] CPU14 is up
  [ 38.304175] smpboot: Booting Node 0 Processor 15 APIC 0xf
  [ 38.304305] microcode: CPU15: patch_level=0x0a20120a
  [ 38.306476] ACPI: \_SB_.PLTF.C00F: Found 2 idle states
  [ 38.308200] CPU15 is up
  [ 38.309810] ACPI: PM: Waking up from system sleep state S3
  [ 38.608689] xhci_hcd 0000:02:00.0: xHC error in resume, USBSTS 0x401, Reinit
  [ 38.608695] usb usb1: root hub lost power or was reset
  [ 38.608696] usb usb2: root hub lost power or was reset
  [ 38.618915] xhci_hcd 0000:05:00.2: xHC error in resume, USBSTS 0x401, Reinit
  [ 38.618917] usb usb3: root hub lost power or was reset
  [ 38.618918] usb usb4: root hub lost power or was reset
  [ 38.666380] nvme nvme0: Shutdown timeout set to 10 seconds
  [ 38.668884] nvme nvme0: 32/0/0 default/read/poll queues
  [ 38.922453] ata4: SATA link down (SStatus 0 SControl 330)
  [ 38.922485] ata1: SATA link down (SStatus 0 SControl 330)
  [ 38.922515] ata5: SATA link down (SStatus 0 SControl 330)
  [ 38.922542] ata3: SATA link down (SStatus 0 SControl 330)
  [ 38.922573] ata2: SATA link down (SStatus 0 SControl 330)
  [ 39.040677] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
  [ 39.455828] usb 1-8: reset full-speed USB device number 4 using xhci_hcd
  [ 39.647688] ata6: failed to resume link (SControl 0)
  [ 39.647707] ata6: SATA link down (SStatus 0 SControl 0)
  [ 39.879825] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
  [ 40.190302] OOM killer enabled.
  [ 40.190303] Restarting tasks ... done.
  [ 40.192595] PM: suspend exit
  [ 40.803691] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
  [ 41.015854] r8169 0000:04:00.0 eno1: Link is Down
  [ 43.115035] r8169 0000:04:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
  [ 43.115052] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
  [ 98.129961] logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.

[menom]

sudo dmesg od PM: suspend entry

Kód: Vybrat vše

[   37.172604] PM: suspend entry (deep)
[   37.176722] Filesystems sync: 0.004 seconds
[   37.176842] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   37.178210] OOM killer disabled.
[   37.178211] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[   37.178907] printk: Suspending console(s) (use no_console_suspend to debug)
[   37.455201] ACPI: PM: Preparing to enter system sleep state S3
[   38.215546] ACPI: PM: Saving platform NVS memory
[   38.215609] Disabling non-boot CPUs ...
[   38.217640] smpboot: CPU 1 is now offline
[   38.219926] smpboot: CPU 2 is now offline
[   38.222075] smpboot: CPU 3 is now offline
[   38.224364] smpboot: CPU 4 is now offline
[   38.226307] smpboot: CPU 5 is now offline
[   38.228236] smpboot: CPU 6 is now offline
[   38.230170] smpboot: CPU 7 is now offline
[   38.232193] smpboot: CPU 8 is now offline
[   38.232745] Spectre V2 : Update user space SMT mitigation: STIBP off
[   38.234102] smpboot: CPU 9 is now offline
[   38.235829] smpboot: CPU 10 is now offline
[   38.237545] smpboot: CPU 11 is now offline
[   38.239244] smpboot: CPU 12 is now offline
[   38.240967] smpboot: CPU 13 is now offline
[   38.242591] smpboot: CPU 14 is now offline
[   38.244300] smpboot: CPU 15 is now offline
[   38.245024] ACPI: PM: Low-level resume complete
[   38.245048] ACPI: PM: Restoring platform NVS memory
[   38.245256] LVT offset 0 assigned for vector 0x400
[   38.245772] Enabling non-boot CPUs ...
[   38.245813] x86: Booting SMP configuration:
[   38.245814] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   38.245930] microcode: CPU1: patch_level=0x0a20120a
[   38.248094] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[   38.251858] CPU1 is up
[   38.251881] smpboot: Booting Node 0 Processor 2 APIC 0x4
[   38.251981] microcode: CPU2: patch_level=0x0a20120a
[   38.254131] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[   38.256861] CPU2 is up
[   38.256875] smpboot: Booting Node 0 Processor 3 APIC 0x6
[   38.257024] microcode: CPU3: patch_level=0x0a20120a
[   38.259182] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[   38.259848] CPU3 is up
[   38.259862] smpboot: Booting Node 0 Processor 4 APIC 0x8
[   38.259961] microcode: CPU4: patch_level=0x0a20120a
[   38.262116] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[   38.263900] CPU4 is up
[   38.263915] smpboot: Booting Node 0 Processor 5 APIC 0xa
[   38.264014] microcode: CPU5: patch_level=0x0a20120a
[   38.266168] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[   38.267972] CPU5 is up
[   38.267988] smpboot: Booting Node 0 Processor 6 APIC 0xc
[   38.268101] microcode: CPU6: patch_level=0x0a20120a
[   38.270268] ACPI: \_SB_.PLTF.C00C: Found 2 idle states
[   38.271914] CPU6 is up
[   38.271929] smpboot: Booting Node 0 Processor 7 APIC 0xe
[   38.272031] microcode: CPU7: patch_level=0x0a20120a
[   38.274194] ACPI: \_SB_.PLTF.C00E: Found 2 idle states
[   38.276104] CPU7 is up
[   38.276119] smpboot: Booting Node 0 Processor 8 APIC 0x1
[   38.276263] microcode: CPU8: patch_level=0x0a20120a
[   38.278432] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[   38.279999] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[   38.280015] CPU8 is up
[   38.280040] smpboot: Booting Node 0 Processor 9 APIC 0x3
[   38.280154] microcode: CPU9: patch_level=0x0a20120a
[   38.282329] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[   38.284007] CPU9 is up
[   38.284024] smpboot: Booting Node 0 Processor 10 APIC 0x5
[   38.284138] microcode: CPU10: patch_level=0x0a20120a
[   38.286310] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[   38.288001] CPU10 is up
[   38.288017] smpboot: Booting Node 0 Processor 11 APIC 0x7
[   38.288126] microcode: CPU11: patch_level=0x0a20120a
[   38.290295] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[   38.292033] CPU11 is up
[   38.292049] smpboot: Booting Node 0 Processor 12 APIC 0x9
[   38.292165] microcode: CPU12: patch_level=0x0a20120a
[   38.294337] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[   38.296092] CPU12 is up
[   38.296107] smpboot: Booting Node 0 Processor 13 APIC 0xb
[   38.296231] microcode: CPU13: patch_level=0x0a20120a
[   38.298405] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[   38.300109] CPU13 is up
[   38.300126] smpboot: Booting Node 0 Processor 14 APIC 0xd
[   38.300245] microcode: CPU14: patch_level=0x0a20120a
[   38.302415] ACPI: \_SB_.PLTF.C00D: Found 2 idle states
[   38.304160] CPU14 is up
[   38.304175] smpboot: Booting Node 0 Processor 15 APIC 0xf
[   38.304305] microcode: CPU15: patch_level=0x0a20120a
[   38.306476] ACPI: \_SB_.PLTF.C00F: Found 2 idle states
[   38.308200] CPU15 is up
[   38.309810] ACPI: PM: Waking up from system sleep state S3
[   38.608689] xhci_hcd 0000:02:00.0: xHC error in resume, USBSTS 0x401, Reinit
[   38.608695] usb usb1: root hub lost power or was reset
[   38.608696] usb usb2: root hub lost power or was reset
[   38.618915] xhci_hcd 0000:05:00.2: xHC error in resume, USBSTS 0x401, Reinit
[   38.618917] usb usb3: root hub lost power or was reset
[   38.618918] usb usb4: root hub lost power or was reset
[   38.666380] nvme nvme0: Shutdown timeout set to 10 seconds
[   38.668884] nvme nvme0: 32/0/0 default/read/poll queues
[   38.922453] ata4: SATA link down (SStatus 0 SControl 330)
[   38.922485] ata1: SATA link down (SStatus 0 SControl 330)
[   38.922515] ata5: SATA link down (SStatus 0 SControl 330)
[   38.922542] ata3: SATA link down (SStatus 0 SControl 330)
[   38.922573] ata2: SATA link down (SStatus 0 SControl 330)
[   39.040677] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[   39.455828] usb 1-8: reset full-speed USB device number 4 using xhci_hcd
[   39.647688] ata6: failed to resume link (SControl 0)
[   39.647707] ata6: SATA link down (SStatus 0 SControl 0)
[   39.879825] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
[   40.190302] OOM killer enabled.
[   40.190303] Restarting tasks ... done.
[   40.192595] PM: suspend exit
[   40.803691] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[   41.015854] r8169 0000:04:00.0 eno1: Link is Down
[   43.115035] r8169 0000:04:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[   43.115052] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   98.129961] logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.

Ako prve na tvojom mieste by som isiel do nastaveni BIOS(UEFI) a zmenil SATA z compatible to AHCI (alebo podobne)
Kvoli tejto hlaske:
ata6: failed to resume link (SControl 0)
Pise sa o tom tu https://forums.linuxmint.com/viewtopic.php?t=73975

Ako druhe:
Toto vyzera ako problem s usb:

Kód: Vybrat vše

 xhci_hcd 0000:02:00.0: xHC error in resume, USBSTS 0x401, Reinit

Pise sa o tom tu https://bugzilla.kernel.org/show_bug.cgi?id=216470 a tiez tu https://lore.kernel.org/all/bug-216470- ... .org%2F/T/
Asi len novsie jadro vyskusat.


.

[tornadocd]

V BIOS ide zapnut iba AHCI alebo prepnut na RAID. Druhy bug sa nepodarilo vyriesit. Nove jadro som este nedaval. Skusil som vyhodit M.2 disk FIRECUDA a dal naspet M.2 Sandisk a uspavanie ide uplne bezproblemovo. Urobil som pri tomto disku tiez: sudo dmesg a su tam rovnake chyby ako su tu uvedene a uspavanie funguje ako ma. Vkladam odkaz na google disk s obomi vypisami dmesg z oboch M.2 diskov Mozno sa tam bude dat daco dohladat. Este vyskusam aktualizovat firmware cez: Seatools vo FIRECUDA a potom zostava uz len skusit nove jadro.

https://drive.google.com/drive/folders/ ... share_link

[tornadocd]

Skusil som aj novsie jadro, aj najnovsie Live distra Spark, Mandriva, Mint a dalsie s novsim jadrom a problem zostava. Seatools nevidi zeby bol daky novy firmware na M.2 disk.

[menom]

.

Este mozno urobit vypis u obidvoch diskov a porovnat navzajom:

Kód: Vybrat vše

sudo hdparm -I /dev/nvme0

Alebo namiesto /dev/nvme0 dosadit do prikazu ako ho system vidi.

.

[menom]

.

V tomto odkaze je napisane ako by sa malo postupovat pri hladani chyby s uspanim systemu

https://wiki.ubuntu.com/DebuggingKernelSuspend

.